u-boot/board/renesas/sh7753evb/spi-boot.c
Yoshihiro Shimoda 320cf35080 sh: add support for sh7753evb board
The SH7753 EVB board has SH7753, 512MB DDR3-SDRAM, SPI ROM,
Gigabit Ethernet, and eMMC.

This patch support the following functions:
 - 512MB DDR3-SDRAM, SCIF4, SPI ROM, Gigabit Ethernet, eMMC

Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
2013-12-18 16:49:08 +09:00

134 lines
3 KiB
C

/*
* Copyright (C) 2013 Renesas Solutions Corp.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#define CONFIG_SPI_ADDR 0x00000000
#define PHYADDR(_addr) ((_addr & 0x1fffffff) | 0x40000000)
#define CONFIG_RAM_BOOT_PHYS PHYADDR(CONFIG_SYS_TEXT_BASE)
#define SPIWDMADR 0xFE001018
#define SPIWDMCNTR 0xFE001020
#define SPIDMCOR 0xFE001028
#define SPIDMINTSR 0xFE001188
#define SPIDMINTMR 0xFE001190
#define SPIDMINTSR_DMEND 0x00000004
#define TBR 0xFE002000
#define RBR 0xFE002000
#define CR1 0xFE002008
#define CR2 0xFE002010
#define CR3 0xFE002018
#define CR4 0xFE002020
#define CR7 0xFE002038
#define CR8 0xFE002040
/* CR1 */
#define SPI_TBE 0x80
#define SPI_TBF 0x40
#define SPI_RBE 0x20
#define SPI_RBF 0x10
#define SPI_PFONRD 0x08
#define SPI_SSDB 0x04
#define SPI_SSD 0x02
#define SPI_SSA 0x01
/* CR2 */
#define SPI_RSTF 0x80
#define SPI_LOOPBK 0x40
#define SPI_CPOL 0x20
#define SPI_CPHA 0x10
#define SPI_L1M0 0x08
/* CR4 */
#define SPI_TBEI 0x80
#define SPI_TBFI 0x40
#define SPI_RBEI 0x20
#define SPI_RBFI 0x10
#define SPI_SpiS0 0x02
#define SPI_SSS 0x01
/* CR7 */
#define CR7_IDX_OR12 0x12
#define OR12_ADDR32 0x00000001
#define spi_write(val, addr) (*(volatile unsigned long *)(addr)) = val
#define spi_read(addr) (*(volatile unsigned long *)(addr))
/* M25P80 */
#define M25_READ 0x03
#define M25_READ_4BYTE 0x13
extern void bss_start(void);
#define __uses_spiboot2 __attribute__((section(".spiboot2.text")))
static void __uses_spiboot2 spi_reset(void)
{
int timeout = 0x00100000;
/* Make sure the last transaction is finalized */
spi_write(0x00, CR3);
spi_write(0x02, CR1);
while (!(spi_read(CR4) & SPI_SpiS0)) {
if (timeout-- < 0)
break;
}
spi_write(0x00, CR1);
spi_write(spi_read(CR2) | SPI_RSTF, CR2); /* fifo reset */
spi_write(spi_read(CR2) & ~SPI_RSTF, CR2);
spi_write(0, SPIDMCOR);
}
static void __uses_spiboot2 spi_read_flash(void *buf, unsigned long addr,
unsigned long len)
{
spi_write(CR7_IDX_OR12, CR7);
if (spi_read(CR8) & OR12_ADDR32) {
/* 4-bytes address mode */
spi_write(M25_READ_4BYTE, TBR);
spi_write((addr >> 24) & 0xFF, TBR); /* ADDR31-24 */
} else {
/* 3-bytes address mode */
spi_write(M25_READ, TBR);
}
spi_write((addr >> 16) & 0xFF, TBR); /* ADDR23-16 */
spi_write((addr >> 8) & 0xFF, TBR); /* ADDR15-8 */
spi_write(addr & 0xFF, TBR); /* ADDR7-0 */
spi_write(SPIDMINTSR_DMEND, SPIDMINTSR);
spi_write((unsigned long)buf, SPIWDMADR);
spi_write(len & 0xFFFFFFE0, SPIWDMCNTR);
spi_write(1, SPIDMCOR);
spi_write(0xff, CR3);
spi_write(spi_read(CR1) | SPI_SSDB, CR1);
spi_write(spi_read(CR1) | SPI_SSA, CR1);
while (!(spi_read(SPIDMINTSR) & SPIDMINTSR_DMEND))
;
/* Nagate SP0-SS0 */
spi_write(0, CR1);
}
void __uses_spiboot2 spiboot_main(void)
{
/*
* This code rounds len up for SPIWDMCNTR. We should set it to 0 in
* lower 5-bits.
*/
void (*_start)(void) = (void *)CONFIG_SYS_TEXT_BASE;
volatile unsigned long len = (bss_start - _start + 31) & 0xffffffe0;
spi_reset();
spi_read_flash((void *)CONFIG_RAM_BOOT_PHYS, CONFIG_SPI_ADDR, len);
_start();
}