u-boot/arch/arm/mach-uniphier/ph1-pro4/pinctrl.c
Masahiro Yamada fcb2525d37 ARM: UniPhier: add pin mux setting for NAND CS1 of PH1-Pro4
The chip select 1 of the NAND controller is available if you want to
use, although the pins are shared with UART port 2.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-05-31 02:56:02 +09:00

49 lines
1.5 KiB
C

/*
* Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <linux/io.h>
#include <mach/sg-regs.h>
void pin_init(void)
{
/* Comment format: PAD Name -> Function Name */
#ifdef CONFIG_NAND_DENALI
sg_set_pinsel(40, 0); /* NFD0 -> NFD0 */
sg_set_pinsel(41, 0); /* NFD1 -> NFD1 */
sg_set_pinsel(42, 0); /* NFD2 -> NFD2 */
sg_set_pinsel(43, 0); /* NFD3 -> NFD3 */
sg_set_pinsel(44, 0); /* NFD4 -> NFD4 */
sg_set_pinsel(45, 0); /* NFD5 -> NFD5 */
sg_set_pinsel(46, 0); /* NFD6 -> NFD6 */
sg_set_pinsel(47, 0); /* NFD7 -> NFD7 */
sg_set_pinsel(48, 0); /* NFALE -> NFALE */
sg_set_pinsel(49, 0); /* NFCLE -> NFCLE */
sg_set_pinsel(50, 0); /* XNFRE -> XNFRE */
sg_set_pinsel(51, 0); /* XNFWE -> XNFWE */
sg_set_pinsel(52, 0); /* XNFWP -> XNFWP */
sg_set_pinsel(53, 0); /* XNFCE0 -> XNFCE0 */
sg_set_pinsel(54, 0); /* NRYBY0 -> NRYBY0 */
/* sg_set_pinsel(131, 1); */ /* RXD2 -> NRYBY1 */
/* sg_set_pinsel(132, 1); */ /* TXD2 -> XNFCE1 */
#endif
#ifdef CONFIG_USB_XHCI_UNIPHIER
sg_set_pinsel(180, 0); /* USB0VBUS -> USB0VBUS */
sg_set_pinsel(181, 0); /* USB0OD -> USB0OD */
sg_set_pinsel(182, 0); /* USB1VBUS -> USB1VBUS */
sg_set_pinsel(183, 0); /* USB1OD -> USB1OD */
#endif
#ifdef CONFIG_USB_EHCI_UNIPHIER
sg_set_pinsel(184, 0); /* USB2VBUS -> USB2VBUS */
sg_set_pinsel(185, 0); /* USB2OD -> USB2OD */
sg_set_pinsel(187, 0); /* USB3VBUS -> USB3VBUS */
sg_set_pinsel(188, 0); /* USB3OD -> USB3OD */
#endif
writel(1, SG_LOADPINCTRL);
}