mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-30 00:21:06 +00:00
e230c579a3
reset cause is a generic functionality based on the soc cru registers in rockchip. This can be used for printing the cause of reset in cpuinfo or some other place where reset cause is needed. Other than cpuinfo, reset cause can also be using during bootcount for checking the specific reset cause and glow the led based on the reset cause. So, let's separate the reset cause code from cpuinfo, and add a check to build it for rk3399, rk3288 since these two soc are supporting reset cause as of now. Tested-by: Suniel Mahesh <sunil@amarulasolutions.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
52 lines
1.9 KiB
Makefile
52 lines
1.9 KiB
Makefile
# SPDX-License-Identifier: GPL-2.0+
|
|
#
|
|
# Copyright (c) 2014 Google, Inc
|
|
# Copyright (c) 2019 Rockchip Electronics Co., Ltd.
|
|
|
|
# We don't want the bootrom-helper present in a full U-Boot build, as
|
|
# this may have entered from ATF with the stack-pointer pointing to
|
|
# inaccessible/protected memory (and the bootrom-helper assumes that
|
|
# the stack-pointer is valid before switching to the U-Boot stack).
|
|
obj-spl-$(CONFIG_ROCKCHIP_BROM_HELPER) += bootrom.o
|
|
obj-spl-$(CONFIG_SPL_ROCKCHIP_COMMON_BOARD) += spl.o spl-boot-order.o
|
|
obj-tpl-$(CONFIG_ROCKCHIP_BROM_HELPER) += bootrom.o
|
|
obj-tpl-$(CONFIG_TPL_ROCKCHIP_COMMON_BOARD) += tpl.o
|
|
obj-tpl-$(CONFIG_ROCKCHIP_PX30) += px30-board-tpl.o
|
|
|
|
obj-spl-$(CONFIG_ROCKCHIP_RK3036) += rk3036-board-spl.o
|
|
|
|
ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),)
|
|
|
|
# Always include boot_mode.o, as we bypass it (i.e. turn it off)
|
|
# inside of boot_mode.c when CONFIG_BOOT_MODE_REG is 0. This way,
|
|
# we can have the preprocessor correctly recognise both 0x0 and 0
|
|
# meaning "turn it off".
|
|
obj-y += boot_mode.o
|
|
obj-$(CONFIG_ROCKCHIP_COMMON_BOARD) += board.o
|
|
obj-$(CONFIG_MISC_INIT_R) += misc.o
|
|
endif
|
|
|
|
ifeq ($(CONFIG_TPL_BUILD),)
|
|
obj-$(CONFIG_DISPLAY_CPUINFO) += cpu-info.o
|
|
endif
|
|
|
|
obj-$(CONFIG_$(SPL_TPL_)RAM) += sdram.o
|
|
|
|
obj-$(CONFIG_ROCKCHIP_PX30) += px30/
|
|
obj-$(CONFIG_ROCKCHIP_RK3036) += rk3036/
|
|
obj-$(CONFIG_ROCKCHIP_RK3128) += rk3128/
|
|
obj-$(CONFIG_ROCKCHIP_RK3188) += rk3188/
|
|
obj-$(CONFIG_ROCKCHIP_RK322X) += rk322x/
|
|
obj-$(CONFIG_ROCKCHIP_RK3288) += rk3288/
|
|
obj-$(CONFIG_ROCKCHIP_RK3308) += rk3308/
|
|
obj-$(CONFIG_ROCKCHIP_RK3328) += rk3328/
|
|
obj-$(CONFIG_ROCKCHIP_RK3368) += rk3368/
|
|
obj-$(CONFIG_ROCKCHIP_RK3399) += rk3399/
|
|
obj-$(CONFIG_ROCKCHIP_RV1108) += rv1108/
|
|
|
|
# Clear out SPL objects, in case this is a TPL build
|
|
obj-spl-$(CONFIG_TPL_BUILD) =
|
|
|
|
# Now add SPL/TPL objects back into the main build
|
|
obj-$(CONFIG_SPL_BUILD) += $(obj-spl-y)
|
|
obj-$(CONFIG_TPL_BUILD) += $(obj-tpl-y)
|