u-boot/board/freescale/common/pq-mds-pib.c
Tom Rini 2cc6071ed4 ppc: Remove MPC8569MDS board
This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.  As this is the last ARCH_MPC8569 board, remove that support
as well.

Cc: Priyanka Jain <priyanka.jain@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-25 11:59:54 -05:00

89 lines
1.9 KiB
C

/*
* Copyright (C) 2007 Freescale Semiconductor, Inc.
*
* Tony Li <tony.li@freescale.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation;
*/
#include <common.h>
#include <i2c.h>
#include <asm/io.h>
#include "pq-mds-pib.h"
int pib_init(void)
{
u8 val8;
u8 orig_i2c_bus;
/* Switch temporarily to I2C bus #2 */
orig_i2c_bus = i2c_get_bus_num();
i2c_set_bus_num(1);
val8 = 0;
#if defined(CONFIG_PCI) && !defined(CONFIG_PCISLAVE)
/* Assign PIB PMC slot to desired PCI bus */
i2c_write(0x23, 0x6, 1, &val8, 1);
i2c_write(0x23, 0x7, 1, &val8, 1);
val8 = 0xff;
i2c_write(0x23, 0x2, 1, &val8, 1);
i2c_write(0x23, 0x3, 1, &val8, 1);
val8 = 0;
i2c_write(0x26, 0x6, 1, &val8, 1);
val8 = 0x34;
i2c_write(0x26, 0x7, 1, &val8, 1);
#if defined(CONFIG_TARGET_MPC832XEMDS)
val8 = 0xf9; /* PMC2, PMC3 slot to PCI bus */
#else
val8 = 0xf3; /* PMC1, PMC2, PMC3 slot to PCI bus */
#endif
i2c_write(0x26, 0x2, 1, &val8, 1);
val8 = 0xff;
i2c_write(0x26, 0x3, 1, &val8, 1);
val8 = 0;
i2c_write(0x27, 0x6, 1, &val8, 1);
i2c_write(0x27, 0x7, 1, &val8, 1);
val8 = 0xff;
i2c_write(0x27, 0x2, 1, &val8, 1);
val8 = 0xef;
i2c_write(0x27, 0x3, 1, &val8, 1);
eieio();
#if defined(CONFIG_TARGET_MPC832XEMDS)
printf("PCI 32bit bus on PMC2 &PMC3\n");
#else
printf("PCI 32bit bus on PMC1 & PMC2 &PMC3\n");
#endif
#endif
#if defined(CONFIG_PQ_MDS_PIB_ATM)
#if defined(CONFIG_TARGET_MPC832XEMDS)
val8 = 0;
i2c_write(0x26, 0x7, 1, &val8, 1);
val8 = 0xf7;
i2c_write(0x26, 0x3, 1, &val8, 1);
val8 = 0;
i2c_write(0x21, 0x6, 1, &val8, 1);
i2c_write(0x21, 0x7, 1, &val8, 1);
val8 = 0xdf;
i2c_write(0x21, 0x2, 1, &val8, 1);
val8 = 0xef;
i2c_write(0x21, 0x3, 1, &val8, 1);
eieio();
printf("QOC3 ATM card on PMC1\n");
#endif
#endif
/* Reset to original I2C bus */
i2c_set_bus_num(orig_i2c_bus);
return 0;
}