u-boot/arch/arm/cpu/armv7/am33xx/clock_am43xx.c
Kishon Vijay Abraham I fc2f15d2f7 ARM: AM43xx: Enable clocks for USB OTGSS and USB PHY
Enabled clocks for dwc3 controller and USB PHY present in AM43xx.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2015-04-14 05:48:08 +02:00

136 lines
3.6 KiB
C

/*
* clock_am43xx.c
*
* clocks for AM43XX based boards
* Derived from AM33XX based boards
*
* Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/arch/cpu.h>
#include <asm/arch/clock.h>
#include <asm/arch/hardware.h>
#include <asm/arch/sys_proto.h>
#include <asm/io.h>
struct cm_perpll *const cmper = (struct cm_perpll *)CM_PER;
struct cm_wkuppll *const cmwkup = (struct cm_wkuppll *)CM_WKUP;
struct cm_dpll *const cmdpll = (struct cm_dpll *)CM_DPLL;
const struct dpll_regs dpll_mpu_regs = {
.cm_clkmode_dpll = CM_WKUP + 0x560,
.cm_idlest_dpll = CM_WKUP + 0x564,
.cm_clksel_dpll = CM_WKUP + 0x56c,
.cm_div_m2_dpll = CM_WKUP + 0x570,
};
const struct dpll_regs dpll_core_regs = {
.cm_clkmode_dpll = CM_WKUP + 0x520,
.cm_idlest_dpll = CM_WKUP + 0x524,
.cm_clksel_dpll = CM_WKUP + 0x52C,
.cm_div_m4_dpll = CM_WKUP + 0x538,
.cm_div_m5_dpll = CM_WKUP + 0x53C,
.cm_div_m6_dpll = CM_WKUP + 0x540,
};
const struct dpll_regs dpll_per_regs = {
.cm_clkmode_dpll = CM_WKUP + 0x5E0,
.cm_idlest_dpll = CM_WKUP + 0x5E4,
.cm_clksel_dpll = CM_WKUP + 0x5EC,
.cm_div_m2_dpll = CM_WKUP + 0x5F0,
};
const struct dpll_regs dpll_ddr_regs = {
.cm_clkmode_dpll = CM_WKUP + 0x5A0,
.cm_idlest_dpll = CM_WKUP + 0x5A4,
.cm_clksel_dpll = CM_WKUP + 0x5AC,
.cm_div_m2_dpll = CM_WKUP + 0x5B0,
.cm_div_m4_dpll = CM_WKUP + 0x5B8,
};
void setup_clocks_for_console(void)
{
u32 clkctrl, idlest = MODULE_CLKCTRL_IDLEST_DISABLED;
/* Do not add any spl_debug prints in this function */
clrsetbits_le32(&cmwkup->wkclkstctrl, CD_CLKCTRL_CLKTRCTRL_MASK,
CD_CLKCTRL_CLKTRCTRL_SW_WKUP <<
CD_CLKCTRL_CLKTRCTRL_SHIFT);
/* Enable UART0 */
clrsetbits_le32(&cmwkup->wkup_uart0ctrl,
MODULE_CLKCTRL_MODULEMODE_MASK,
MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN <<
MODULE_CLKCTRL_MODULEMODE_SHIFT);
while ((idlest == MODULE_CLKCTRL_IDLEST_DISABLED) ||
(idlest == MODULE_CLKCTRL_IDLEST_TRANSITIONING)) {
clkctrl = readl(&cmwkup->wkup_uart0ctrl);
idlest = (clkctrl & MODULE_CLKCTRL_IDLEST_MASK) >>
MODULE_CLKCTRL_IDLEST_SHIFT;
}
}
void enable_basic_clocks(void)
{
u32 *const clk_domains[] = {
&cmper->l3clkstctrl,
&cmper->l3sclkstctrl,
&cmper->l4lsclkstctrl,
&cmwkup->wkclkstctrl,
&cmper->emifclkstctrl,
0
};
u32 *const clk_modules_explicit_en[] = {
&cmper->l3clkctrl,
&cmper->l4lsclkctrl,
&cmper->l4fwclkctrl,
&cmwkup->wkl4wkclkctrl,
&cmper->l3instrclkctrl,
&cmper->l4hsclkctrl,
&cmwkup->wkgpio0clkctrl,
&cmwkup->wkctrlclkctrl,
&cmper->timer2clkctrl,
&cmper->gpmcclkctrl,
&cmper->elmclkctrl,
&cmper->mmc0clkctrl,
&cmper->mmc1clkctrl,
&cmwkup->wkup_i2c0ctrl,
&cmper->gpio1clkctrl,
&cmper->gpio2clkctrl,
&cmper->gpio3clkctrl,
&cmper->gpio4clkctrl,
&cmper->gpio5clkctrl,
&cmper->i2c1clkctrl,
&cmper->cpgmac0clkctrl,
&cmper->emiffwclkctrl,
&cmper->emifclkctrl,
&cmper->otfaemifclkctrl,
&cmper->qspiclkctrl,
&cmper->usb0clkctrl,
&cmper->usbphyocp2scp0clkctrl,
&cmper->usb1clkctrl,
&cmper->usbphyocp2scp1clkctrl,
0
};
setbits_le32(&cmper->usb0clkctrl,
USBOTGSSX_CLKCTRL_OPTFCLKEN_REFCLK960);
setbits_le32(&cmwkup->usbphy0clkctrl,
USBPHY0_CLKCTRL_OPTFCLKEN_CLK32K);
setbits_le32(&cmper->usb1clkctrl,
USBOTGSSX_CLKCTRL_OPTFCLKEN_REFCLK960);
setbits_le32(&cmwkup->usbphy1clkctrl,
USBPHY0_CLKCTRL_OPTFCLKEN_CLK32K);
do_enable_clocks(clk_domains, clk_modules_explicit_en, 1);
/* Select the Master osc clk as Timer2 clock source */
writel(0x1, &cmdpll->clktimer2clk);
/* For OPP100 the mac clock should be /5. */
writel(0x4, &cmdpll->clkselmacclk);
}