mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-17 02:08:38 +00:00
9319a756ff
AT91 PIO controller is a combined gpio-controller, pin-mux and pin-config module. The peripheral's pins are assigned through per-pin based muxing logic. Each SoC will have to describe the its limitation and pin configuration via device tree. This will allow to do not need to touch the C code when adding new SoC if the IP version is supported. Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com> Reviewed-by: Simon Glass <sjg@chromium.org>
42 lines
1.2 KiB
C
42 lines
1.2 KiB
C
/*
|
|
* This header provides constants for most at91 pinctrl bindings.
|
|
*
|
|
* Copyright (C) 2013 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
|
|
*
|
|
* GPLv2 only
|
|
*/
|
|
|
|
#ifndef __DT_BINDINGS_AT91_PINCTRL_H__
|
|
#define __DT_BINDINGS_AT91_PINCTRL_H__
|
|
|
|
#define AT91_PINCTRL_NONE (0 << 0)
|
|
#define AT91_PINCTRL_PULL_UP (1 << 0)
|
|
#define AT91_PINCTRL_MULTI_DRIVE (1 << 1)
|
|
#define AT91_PINCTRL_DEGLITCH (1 << 2)
|
|
#define AT91_PINCTRL_PULL_DOWN (1 << 3)
|
|
#define AT91_PINCTRL_DIS_SCHMIT (1 << 4)
|
|
#define AT91_PINCTRL_OUTPUT (1 << 7)
|
|
#define AT91_PINCTRL_OUTPUT_VAL(x) ((x & 0x1) << 8)
|
|
#define AT91_PINCTRL_DEBOUNCE (1 << 16)
|
|
#define AT91_PINCTRL_DEBOUNCE_VAL(x) (x << 17)
|
|
|
|
#define AT91_PINCTRL_PULL_UP_DEGLITCH (AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DEGLITCH)
|
|
|
|
#define AT91_PINCTRL_DRIVE_STRENGTH_DEFAULT (0x0 << 5)
|
|
#define AT91_PINCTRL_DRIVE_STRENGTH_LOW (0x1 << 5)
|
|
#define AT91_PINCTRL_DRIVE_STRENGTH_MED (0x2 << 5)
|
|
#define AT91_PINCTRL_DRIVE_STRENGTH_HI (0x3 << 5)
|
|
|
|
#define AT91_PIOA 0
|
|
#define AT91_PIOB 1
|
|
#define AT91_PIOC 2
|
|
#define AT91_PIOD 3
|
|
#define AT91_PIOE 4
|
|
|
|
#define AT91_PERIPH_GPIO 0
|
|
#define AT91_PERIPH_A 1
|
|
#define AT91_PERIPH_B 2
|
|
#define AT91_PERIPH_C 3
|
|
#define AT91_PERIPH_D 4
|
|
|
|
#endif /* __DT_BINDINGS_AT91_PINCTRL_H__ */
|