mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-17 02:08:38 +00:00
6f6b7cfa89
This converts the following to Kconfig: CONFIG_CONS_INDEX We have existing entries for this option in a number of places, with different guards on them. They're also sometimes used for things not directly inside of the serial driver. First, introduce a new symbol to guard the use of CONFIG_CONS_INDEX, so that in the case where we don't need this for the serial driver, but for some other use, we can still do it. Next, consolidate all of these into the single entry in drivers/serial/Kconfig. Finally, introduce CONS_INDEX_[023456] so that we can imply a correct value here to make the defconfig side of this smaller. Signed-off-by: Adam Ford <aford173@gmail.com> [trini: Rework a lot of the logic here, such that I took authorship from Adam, but kept his S-o-B line] Signed-off-by: Tom Rini <trini@konsulko.com>
248 lines
8.2 KiB
C
248 lines
8.2 KiB
C
/*
|
|
* Copyright (C) 2009, STMicroelectronics - All Rights Reserved
|
|
* Author(s): Vipin Kumar, <vipin.kumar@st.com> for STMicroelectronics.
|
|
*
|
|
* Copyright (C) 2012, 2015 Stefan Roese <sr@denx.de>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/*
|
|
* High Level Configuration Options
|
|
* (easy to change)
|
|
*/
|
|
#define CONFIG_SPEAR600 /* SPEAr600 SoC */
|
|
#define CONFIG_X600 /* on X600 board */
|
|
|
|
#include <asm/arch/hardware.h>
|
|
|
|
/* Timer, HZ specific defines */
|
|
#define CONFIG_SYS_HZ_CLOCK 8300000
|
|
|
|
#define CONFIG_SYS_FLASH_BASE 0xf8000000
|
|
/* Reserve 8KiB for SPL */
|
|
#define CONFIG_SPL_PAD_TO 8192 /* decimal for 'dd' */
|
|
#define CONFIG_SYS_SPL_LEN CONFIG_SPL_PAD_TO
|
|
#define CONFIG_SYS_UBOOT_BASE (CONFIG_SYS_FLASH_BASE + \
|
|
CONFIG_SYS_SPL_LEN)
|
|
#define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE
|
|
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
|
|
#define CONFIG_SYS_MONITOR_LEN 0x60000
|
|
|
|
/* Serial Configuration (PL011) */
|
|
#define CONFIG_SYS_SERIAL0 0xD0000000
|
|
#define CONFIG_SYS_SERIAL1 0xD0080000
|
|
#define CONFIG_PL01x_PORTS { (void *)CONFIG_SYS_SERIAL0, \
|
|
(void *)CONFIG_SYS_SERIAL1 }
|
|
#define CONFIG_PL011_CLOCK (48 * 1000 * 1000)
|
|
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, \
|
|
57600, 115200 }
|
|
#define CONFIG_SYS_LOADS_BAUD_CHANGE
|
|
|
|
/* NOR FLASH config options */
|
|
#define CONFIG_ST_SMI
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1
|
|
#define CONFIG_SYS_FLASH_BANK_SIZE 0x01000000
|
|
#define CONFIG_SYS_FLASH_ADDR_BASE { CONFIG_SYS_FLASH_BASE }
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 128
|
|
#define CONFIG_SYS_FLASH_EMPTY_INFO
|
|
#define CONFIG_SYS_FLASH_ERASE_TOUT (3 * CONFIG_SYS_HZ)
|
|
#define CONFIG_SYS_FLASH_WRITE_TOUT (3 * CONFIG_SYS_HZ)
|
|
|
|
/* NAND FLASH config options */
|
|
#define CONFIG_NAND_FSMC
|
|
#define CONFIG_SYS_NAND_SELF_INIT
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define CONFIG_SYS_NAND_BASE CONFIG_FSMC_NAND_BASE
|
|
#define CONFIG_MTD_ECC_SOFT
|
|
#define CONFIG_SYS_FSMC_NAND_8BIT
|
|
#define CONFIG_SYS_NAND_ONFI_DETECTION
|
|
#define CONFIG_NAND_ECC_BCH
|
|
|
|
/* UBI/UBI config options */
|
|
#define CONFIG_MTD_DEVICE
|
|
#define CONFIG_MTD_PARTITIONS
|
|
|
|
/* Ethernet config options */
|
|
#define CONFIG_MII
|
|
#define CONFIG_PHY_RESET_DELAY 10000 /* in usec */
|
|
|
|
#define CONFIG_SPEAR_GPIO
|
|
|
|
/* I2C config options */
|
|
#define CONFIG_SYS_I2C
|
|
#define CONFIG_SYS_I2C_BASE 0xD0200000
|
|
#define CONFIG_SYS_I2C_SPEED 400000
|
|
#define CONFIG_SYS_I2C_SLAVE 0x02
|
|
#define CONFIG_I2C_CHIPADDRESS 0x50
|
|
|
|
#define CONFIG_RTC_M41T62 1
|
|
#define CONFIG_SYS_I2C_RTC_ADDR 0x68
|
|
|
|
/* FPGA config options */
|
|
#define CONFIG_FPGA_COUNT 1
|
|
|
|
/* USB EHCI options */
|
|
#define CONFIG_USB_EHCI_SPEAR
|
|
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
|
|
|
|
/*
|
|
* U-Boot Environment placing definitions.
|
|
*/
|
|
#define CONFIG_ENV_SECT_SIZE 0x00010000
|
|
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \
|
|
CONFIG_SYS_MONITOR_LEN)
|
|
#define CONFIG_ENV_SIZE 0x02000
|
|
#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + \
|
|
CONFIG_ENV_SECT_SIZE)
|
|
#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
|
|
|
|
/* Miscellaneous configurable options */
|
|
#define CONFIG_ARCH_CPU_INIT
|
|
#define CONFIG_BOOT_PARAMS_ADDR 0x00000100
|
|
#define CONFIG_CMDLINE_TAG
|
|
#define CONFIG_SETUP_MEMORY_TAGS
|
|
#define CONFIG_MISC_INIT_R
|
|
#define CONFIG_MX_CYCLIC /* enable mdc/mwc commands */
|
|
|
|
#define CONFIG_SYS_MEMTEST_START 0x00800000
|
|
#define CONFIG_SYS_MEMTEST_END 0x04000000
|
|
#define CONFIG_SYS_MALLOC_LEN (8 << 20)
|
|
#define CONFIG_SYS_LOAD_ADDR 0x00800000
|
|
|
|
#define CONFIG_HOSTNAME x600
|
|
#define CONFIG_UBI_PART ubi0
|
|
#define CONFIG_UBIFS_VOLUME rootfs
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"u-boot_addr=1000000\0" \
|
|
"u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.spr\0" \
|
|
"load=tftp ${u-boot_addr} ${u-boot}\0" \
|
|
"update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE) \
|
|
" +${filesize};" \
|
|
"erase " __stringify(CONFIG_SYS_MONITOR_BASE) " +${filesize};" \
|
|
"cp.b ${u-boot_addr} " __stringify(CONFIG_SYS_MONITOR_BASE) \
|
|
" ${filesize};" \
|
|
"protect on " __stringify(CONFIG_SYS_MONITOR_BASE) \
|
|
" +${filesize}\0" \
|
|
"upd=run load update\0" \
|
|
"ubifs=" __stringify(CONFIG_HOSTNAME) "/ubifs.img\0" \
|
|
"part=" __stringify(CONFIG_UBI_PART) "\0" \
|
|
"vol=" __stringify(CONFIG_UBIFS_VOLUME) "\0" \
|
|
"load_ubifs=tftp ${kernel_addr} ${ubifs}\0" \
|
|
"update_ubifs=ubi part ${part};ubi write ${kernel_addr} ${vol}" \
|
|
" ${filesize}\0" \
|
|
"upd_ubifs=run load_ubifs update_ubifs\0" \
|
|
"init_ubifs=nand erase.part ubi0;ubi part ${part};" \
|
|
"ubi create ${vol} 4000000\0" \
|
|
"netdev=eth0\0" \
|
|
"rootpath=/opt/eldk-4.2/arm\0" \
|
|
"nfsargs=setenv bootargs root=/dev/nfs rw " \
|
|
"nfsroot=${serverip}:${rootpath}\0" \
|
|
"ramargs=setenv bootargs root=/dev/ram rw\0" \
|
|
"boot_part=0\0" \
|
|
"altbootcmd=if test $boot_part -eq 0;then " \
|
|
"echo Switching to partition 1!;" \
|
|
"setenv boot_part 1;" \
|
|
"else; " \
|
|
"echo Switching to partition 0!;" \
|
|
"setenv boot_part 0;" \
|
|
"fi;" \
|
|
"saveenv;boot\0" \
|
|
"ubifsargs=set bootargs ubi.mtd=ubi${boot_part} " \
|
|
"root=ubi0:rootfs rootfstype=ubifs\0" \
|
|
"kernel=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \
|
|
"kernel_fs=/boot/uImage \0" \
|
|
"kernel_addr=1000000\0" \
|
|
"dtb=" __stringify(CONFIG_HOSTNAME) "/" \
|
|
__stringify(CONFIG_HOSTNAME) ".dtb\0" \
|
|
"dtb_fs=/boot/" __stringify(CONFIG_HOSTNAME) ".dtb\0" \
|
|
"dtb_addr=1800000\0" \
|
|
"load_kernel=tftp ${kernel_addr} ${kernel}\0" \
|
|
"load_dtb=tftp ${dtb_addr} ${dtb}\0" \
|
|
"addip=setenv bootargs ${bootargs} " \
|
|
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
|
|
":${hostname}:${netdev}:off panic=1\0" \
|
|
"addcon=setenv bootargs ${bootargs} console=ttyAMA0," \
|
|
"${baudrate}\0" \
|
|
"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
|
|
"net_nfs=run load_dtb load_kernel; " \
|
|
"run nfsargs addip addcon addmtd addmisc;" \
|
|
"bootm ${kernel_addr} - ${dtb_addr}\0" \
|
|
"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
|
|
"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
|
|
"nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip" \
|
|
" addcon addmisc addmtd;" \
|
|
"bootm ${kernel_addr} - ${dtb_addr}\0" \
|
|
"ubifs_mount=ubi part ubi${boot_part};ubifsmount ubi:rootfs\0" \
|
|
"ubifs_load=ubifsload ${kernel_addr} ${kernel_fs};" \
|
|
"ubifsload ${dtb_addr} ${dtb_fs};\0" \
|
|
"nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip addcon " \
|
|
"addmtd addmisc;bootm ${kernel_addr} - ${dtb_addr}\0" \
|
|
"bootcmd=run nand_ubifs\0" \
|
|
"\0"
|
|
|
|
/* Physical Memory Map */
|
|
#define CONFIG_NR_DRAM_BANKS 1
|
|
#define PHYS_SDRAM_1 0x00000000
|
|
#define PHYS_SDRAM_1_MAXSIZE 0x40000000
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
|
|
#define CONFIG_SRAM_BASE 0xd2800000
|
|
/* Preserve the last 2 lwords for the boot-counter */
|
|
#define CONFIG_SRAM_SIZE ((8 << 10) - 0x8)
|
|
#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SRAM_BASE
|
|
#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SRAM_SIZE
|
|
|
|
#define CONFIG_SYS_INIT_SP_OFFSET \
|
|
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
|
|
#define CONFIG_SYS_INIT_SP_ADDR \
|
|
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
|
|
|
/*
|
|
* SPL related defines
|
|
*/
|
|
#define CONFIG_SPL_TEXT_BASE 0xd2800b00
|
|
#define CONFIG_SPL_MAX_SIZE (CONFIG_SRAM_SIZE - 0xb00)
|
|
#define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/spear"
|
|
|
|
/*
|
|
* Please select/define only one of the following
|
|
* Each definition corresponds to a supported DDR chip.
|
|
* DDR configuration is based on the following selection
|
|
*/
|
|
#define CONFIG_DDR_MT47H64M16 1
|
|
#define CONFIG_DDR_MT47H32M16 0
|
|
#define CONFIG_DDR_MT47H128M8 0
|
|
|
|
/*
|
|
* Synchronous/Asynchronous operation of DDR
|
|
*
|
|
* Select CONFIG_DDR_2HCLK for DDR clk = 333MHz, synchronous operation
|
|
* Select CONFIG_DDR_HCLK for DDR clk = 166MHz, synchronous operation
|
|
* Select CONFIG_DDR_PLL2 for DDR clk = PLL2, asynchronous operation
|
|
*/
|
|
#define CONFIG_DDR_2HCLK 1
|
|
#define CONFIG_DDR_HCLK 0
|
|
#define CONFIG_DDR_PLL2 0
|
|
|
|
/*
|
|
* xxx_BOOT_SUPPORTED macro defines whether a booting type is supported
|
|
* or not. Modify/Add to only these macros to define new boot types
|
|
*/
|
|
#define USB_BOOT_SUPPORTED 0
|
|
#define PCIE_BOOT_SUPPORTED 0
|
|
#define SNOR_BOOT_SUPPORTED 1
|
|
#define NAND_BOOT_SUPPORTED 1
|
|
#define PNOR_BOOT_SUPPORTED 0
|
|
#define TFTP_BOOT_SUPPORTED 0
|
|
#define UART_BOOT_SUPPORTED 0
|
|
#define SPI_BOOT_SUPPORTED 0
|
|
#define I2C_BOOT_SUPPORTED 0
|
|
#define MMC_BOOT_SUPPORTED 0
|
|
|
|
#endif /* __CONFIG_H */
|