u-boot/configs/stm32f469-discovery_defconfig
Patrice Chotard c0cdd5adc8 board: stm32: add stm32f469-discovery board support
This board offers :

 _ STM32F469NIH6 microcontroller featuring 2 Mbytes of Flash memory
   and 324 Kbytes of RAM in BGA216 package
 _ On-board ST-LINK/V2-1 SWD debugger, supporting USB reenumeration capability:
     _ Mbed-enabled (mbed.org)
     _ USB functions: USB virtual COM port, mass storage, debug port
 _ 4 inches 800x480 pixel TFT color LCD with MIPI DSI interface and capacitive
   touch screen
 _ SAI Audio DAC, with a stereo headphone output jack
 _ 3 MEMS microphones
 _ MicroSD card connector
 _ I2C extension connector
 _ 4Mx32bit SDRAM
 _ 128-Mbit Quad-SPI NOR Flash
 _ Reset and wake-up buttons
 _ 4 color user LEDs
 _ USB OTG FS with Micro-AB connector
 _ Three power supply options:
 _ Expansion connectors and Arduino™ UNO V3 connectors

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
2018-01-10 08:05:47 -05:00

42 lines
945 B
Text

CONFIG_ARM=y
CONFIG_STM32=y
CONFIG_SYS_MALLOC_F_LEN=0xF00
CONFIG_STM32F4=y
CONFIG_TARGET_STM32F469_DISCOVERY=y
CONFIG_DEFAULT_DEVICE_TREE="stm32f469-disco"
CONFIG_BOOTDELAY=3
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_BOARD_EARLY_INIT_F=y
CONFIG_HUSH_PARSER=y
CONFIG_SYS_PROMPT="U-Boot > "
CONFIG_CMD_BOOTZ=y
# CONFIG_CMD_BOOTEFI_HELLO_COMPILE is not set
CONFIG_CMD_IMLS=y
CONFIG_CMD_GPT=y
# CONFIG_RANDOM_UUID is not set
CONFIG_CMD_MMC=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_CACHE=y
CONFIG_CMD_TIMER=y
CONFIG_CMD_EXT2=y
CONFIG_CMD_EXT4=y
CONFIG_CMD_FAT=y
CONFIG_CMD_FS_GENERIC=y
# CONFIG_DOS_PARTITION is not set
CONFIG_OF_CONTROL=y
CONFIG_OF_EMBED=y
# CONFIG_BLK is not set
CONFIG_CLK=y
CONFIG_DM_GPIO=y
CONFIG_MISC=y
CONFIG_STM32_RCC=y
CONFIG_DM_MMC=y
CONFIG_ARM_PL180_MMCI=y
CONFIG_MTD_NOR_FLASH=y
CONFIG_PINCTRL=y
CONFIG_PINCTRL_STM32=y
CONFIG_RAM=y
CONFIG_STM32_SDRAM=y
CONFIG_DM_RESET=y
CONFIG_STM32_RESET=y
CONFIG_STM32X7_SERIAL=y