mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 13:56:30 +00:00
1a4596601f
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
283 lines
6.7 KiB
C
283 lines
6.7 KiB
C
/*
|
|
* Copyright 2008-2012 Freescale Semiconductor, Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <pci.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/mmu.h>
|
|
#include <asm/cache.h>
|
|
#include <asm/immap_85xx.h>
|
|
#include <asm/fsl_pci.h>
|
|
#include <asm/fsl_ddr_sdram.h>
|
|
#include <asm/io.h>
|
|
#include <asm/fsl_serdes.h>
|
|
#include <spd.h>
|
|
#include <miiphy.h>
|
|
#include <libfdt.h>
|
|
#include <spd_sdram.h>
|
|
#include <fdt_support.h>
|
|
#include <fsl_mdio.h>
|
|
#include <tsec.h>
|
|
#include <netdev.h>
|
|
#include <sata.h>
|
|
|
|
#include "../common/sgmii_riser.h"
|
|
|
|
int board_early_init_f (void)
|
|
{
|
|
#ifdef CONFIG_MMC
|
|
volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
|
|
setbits_be32(&gur->pmuxcr,
|
|
(MPC85xx_PMUXCR_SDHC_CD |
|
|
MPC85xx_PMUXCR_SDHC_WP));
|
|
|
|
/* The MPC8536DS board insert the SDHC_WP pin for erratum NMG_eSDHC118,
|
|
* however, this erratum only applies to MPC8536 Rev1.0.
|
|
* So set SDHC_WP to active-low when use MPC8536 Rev1.1 and greater.*/
|
|
if ((((SVR_MAJ(get_svr()) & 0x7) == 0x1) &&
|
|
(SVR_MIN(get_svr()) >= 0x1))
|
|
|| (SVR_MAJ(get_svr() & 0x7) > 0x1))
|
|
setbits_be32(&gur->gencfgr, MPC85xx_GENCFGR_SDHC_WP_INV);
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
int checkboard (void)
|
|
{
|
|
u8 vboot;
|
|
u8 *pixis_base = (u8 *)PIXIS_BASE;
|
|
|
|
printf("Board: MPC8536DS Sys ID: 0x%02x, "
|
|
"Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
|
|
in_8(pixis_base + PIXIS_ID), in_8(pixis_base + PIXIS_VER),
|
|
in_8(pixis_base + PIXIS_PVER));
|
|
|
|
vboot = in_8(pixis_base + PIXIS_VBOOT);
|
|
switch ((vboot & PIXIS_VBOOT_LBMAP) >> 5) {
|
|
case PIXIS_VBOOT_LBMAP_NOR0:
|
|
puts ("vBank: 0\n");
|
|
break;
|
|
case PIXIS_VBOOT_LBMAP_NOR1:
|
|
puts ("vBank: 1\n");
|
|
break;
|
|
case PIXIS_VBOOT_LBMAP_NOR2:
|
|
puts ("vBank: 2\n");
|
|
break;
|
|
case PIXIS_VBOOT_LBMAP_NOR3:
|
|
puts ("vBank: 3\n");
|
|
break;
|
|
case PIXIS_VBOOT_LBMAP_PJET:
|
|
puts ("Promjet\n");
|
|
break;
|
|
case PIXIS_VBOOT_LBMAP_NAND:
|
|
puts ("NAND\n");
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if !defined(CONFIG_SPD_EEPROM)
|
|
/*
|
|
* Fixed sdram init -- doesn't use serial presence detect.
|
|
*/
|
|
|
|
phys_size_t fixed_sdram (void)
|
|
{
|
|
volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
|
|
volatile ccsr_ddr_t *ddr= &immap->im_ddr;
|
|
uint d_init;
|
|
|
|
ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
|
|
ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;
|
|
|
|
ddr->timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
|
|
ddr->timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
|
|
ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
|
|
ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
|
|
ddr->sdram_mode = CONFIG_SYS_DDR_MODE_1;
|
|
ddr->sdram_mode_2 = CONFIG_SYS_DDR_MODE_2;
|
|
ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL;
|
|
ddr->sdram_data_init = CONFIG_SYS_DDR_DATA_INIT;
|
|
ddr->sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL;
|
|
ddr->sdram_cfg_2 = CONFIG_SYS_DDR_CONTROL2;
|
|
|
|
#if defined (CONFIG_DDR_ECC)
|
|
ddr->err_int_en = CONFIG_SYS_DDR_ERR_INT_EN;
|
|
ddr->err_disable = CONFIG_SYS_DDR_ERR_DIS;
|
|
ddr->err_sbe = CONFIG_SYS_DDR_SBE;
|
|
#endif
|
|
asm("sync;isync");
|
|
|
|
udelay(500);
|
|
|
|
ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL;
|
|
|
|
#if defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
|
|
d_init = 1;
|
|
debug("DDR - 1st controller: memory initializing\n");
|
|
/*
|
|
* Poll until memory is initialized.
|
|
* 512 Meg at 400 might hit this 200 times or so.
|
|
*/
|
|
while ((ddr->sdram_cfg_2 & (d_init << 4)) != 0) {
|
|
udelay(1000);
|
|
}
|
|
debug("DDR: memory initialized\n\n");
|
|
asm("sync; isync");
|
|
udelay(500);
|
|
#endif
|
|
|
|
return 512 * 1024 * 1024;
|
|
}
|
|
|
|
#endif
|
|
|
|
#ifdef CONFIG_PCI1
|
|
static struct pci_controller pci1_hose;
|
|
#endif
|
|
|
|
#ifdef CONFIG_PCI
|
|
void pci_init_board(void)
|
|
{
|
|
ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
|
|
struct fsl_pci_info pci_info;
|
|
u32 devdisr, pordevsr;
|
|
u32 porpllsr, pci_agent, pci_speed, pci_32, pci_arb, pci_clk_sel;
|
|
int first_free_busno;
|
|
|
|
first_free_busno = fsl_pcie_init_board(0);
|
|
|
|
#ifdef CONFIG_PCI1
|
|
devdisr = in_be32(&gur->devdisr);
|
|
pordevsr = in_be32(&gur->pordevsr);
|
|
porpllsr = in_be32(&gur->porpllsr);
|
|
|
|
pci_speed = 66666000;
|
|
pci_32 = 1;
|
|
pci_arb = pordevsr & MPC85xx_PORDEVSR_PCI1_ARB;
|
|
pci_clk_sel = porpllsr & MPC85xx_PORDEVSR_PCI1_SPD;
|
|
|
|
if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
|
|
SET_STD_PCI_INFO(pci_info, 1);
|
|
set_next_law(pci_info.mem_phys,
|
|
law_size_bits(pci_info.mem_size), pci_info.law);
|
|
set_next_law(pci_info.io_phys,
|
|
law_size_bits(pci_info.io_size), pci_info.law);
|
|
|
|
pci_agent = fsl_setup_hose(&pci1_hose, pci_info.regs);
|
|
printf("PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
|
|
(pci_32) ? 32 : 64,
|
|
(pci_speed == 33333000) ? "33" :
|
|
(pci_speed == 66666000) ? "66" : "unknown",
|
|
pci_clk_sel ? "sync" : "async",
|
|
pci_agent ? "agent" : "host",
|
|
pci_arb ? "arbiter" : "external-arbiter",
|
|
pci_info.regs);
|
|
|
|
first_free_busno = fsl_pci_init_port(&pci_info,
|
|
&pci1_hose, first_free_busno);
|
|
} else {
|
|
printf("PCI: disabled\n");
|
|
}
|
|
|
|
puts("\n");
|
|
#else
|
|
setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1); /* disable */
|
|
#endif
|
|
}
|
|
#endif
|
|
|
|
int board_early_init_r(void)
|
|
{
|
|
const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
|
|
const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
|
|
|
|
/*
|
|
* Remap Boot flash + PROMJET region to caching-inhibited
|
|
* so that flash can be erased properly.
|
|
*/
|
|
|
|
/* Flush d-cache and invalidate i-cache of any FLASH data */
|
|
flush_dcache();
|
|
invalidate_icache();
|
|
|
|
/* invalidate existing TLB entry for flash + promjet */
|
|
disable_tlb(flash_esel);
|
|
|
|
set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, /* tlb, epn, rpn */
|
|
MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, /* perms, wimge */
|
|
0, flash_esel, BOOKE_PAGESZ_256M, 1); /* ts, esel, tsize, iprot */
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_eth_init(bd_t *bis)
|
|
{
|
|
#ifdef CONFIG_TSEC_ENET
|
|
struct fsl_pq_mdio_info mdio_info;
|
|
struct tsec_info_struct tsec_info[2];
|
|
int num = 0;
|
|
|
|
#ifdef CONFIG_TSEC1
|
|
SET_STD_TSEC_INFO(tsec_info[num], 1);
|
|
if (is_serdes_configured(SGMII_TSEC1)) {
|
|
puts("eTSEC1 is in sgmii mode.\n");
|
|
tsec_info[num].phyaddr = 0;
|
|
tsec_info[num].flags |= TSEC_SGMII;
|
|
}
|
|
num++;
|
|
#endif
|
|
#ifdef CONFIG_TSEC3
|
|
SET_STD_TSEC_INFO(tsec_info[num], 3);
|
|
if (is_serdes_configured(SGMII_TSEC3)) {
|
|
puts("eTSEC3 is in sgmii mode.\n");
|
|
tsec_info[num].phyaddr = 1;
|
|
tsec_info[num].flags |= TSEC_SGMII;
|
|
}
|
|
num++;
|
|
#endif
|
|
|
|
if (!num) {
|
|
printf("No TSECs initialized\n");
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_FSL_SGMII_RISER
|
|
if (is_serdes_configured(SGMII_TSEC1) ||
|
|
is_serdes_configured(SGMII_TSEC3)) {
|
|
fsl_sgmii_riser_init(tsec_info, num);
|
|
}
|
|
#endif
|
|
|
|
mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
|
|
mdio_info.name = DEFAULT_MII_NAME;
|
|
fsl_pq_mdio_init(bis, &mdio_info);
|
|
|
|
tsec_eth_init(bis, tsec_info, num);
|
|
#endif
|
|
return pci_eth_init(bis);
|
|
}
|
|
|
|
#if defined(CONFIG_OF_BOARD_SETUP)
|
|
void ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
ft_cpu_setup(blob, bd);
|
|
|
|
FT_FSL_PCI_SETUP;
|
|
|
|
#ifdef CONFIG_FSL_SGMII_RISER
|
|
fsl_sgmii_riser_fdt_fixup(blob);
|
|
#endif
|
|
|
|
#ifdef CONFIG_HAS_FSL_MPH_USB
|
|
fdt_fixup_dr_usb(blob, bd);
|
|
#endif
|
|
|
|
}
|
|
#endif
|