mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-25 04:23:46 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
1077 lines
26 KiB
C
1077 lines
26 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (c) 2015 Google, Inc
|
|
* Copyright (c) 2011 The Chromium OS Authors.
|
|
* Copyright (C) 2009 NVIDIA, Corporation
|
|
* Copyright (C) 2007-2008 SMSC (Steve Glendinning)
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <malloc.h>
|
|
#include <memalign.h>
|
|
#include <usb.h>
|
|
#include <asm/unaligned.h>
|
|
#include <linux/mii.h>
|
|
#include "usb_ether.h"
|
|
|
|
/* SMSC LAN95xx based USB 2.0 Ethernet Devices */
|
|
|
|
/* LED defines */
|
|
#define LED_GPIO_CFG (0x24)
|
|
#define LED_GPIO_CFG_SPD_LED (0x01000000)
|
|
#define LED_GPIO_CFG_LNK_LED (0x00100000)
|
|
#define LED_GPIO_CFG_FDX_LED (0x00010000)
|
|
|
|
/* Tx command words */
|
|
#define TX_CMD_A_FIRST_SEG_ 0x00002000
|
|
#define TX_CMD_A_LAST_SEG_ 0x00001000
|
|
|
|
/* Rx status word */
|
|
#define RX_STS_FL_ 0x3FFF0000 /* Frame Length */
|
|
#define RX_STS_ES_ 0x00008000 /* Error Summary */
|
|
|
|
/* SCSRs */
|
|
#define ID_REV 0x00
|
|
|
|
#define INT_STS 0x08
|
|
|
|
#define TX_CFG 0x10
|
|
#define TX_CFG_ON_ 0x00000004
|
|
|
|
#define HW_CFG 0x14
|
|
#define HW_CFG_BIR_ 0x00001000
|
|
#define HW_CFG_RXDOFF_ 0x00000600
|
|
#define HW_CFG_MEF_ 0x00000020
|
|
#define HW_CFG_BCE_ 0x00000002
|
|
#define HW_CFG_LRST_ 0x00000008
|
|
|
|
#define PM_CTRL 0x20
|
|
#define PM_CTL_PHY_RST_ 0x00000010
|
|
|
|
#define AFC_CFG 0x2C
|
|
|
|
/*
|
|
* Hi watermark = 15.5Kb (~10 mtu pkts)
|
|
* low watermark = 3k (~2 mtu pkts)
|
|
* backpressure duration = ~ 350us
|
|
* Apply FC on any frame.
|
|
*/
|
|
#define AFC_CFG_DEFAULT 0x00F830A1
|
|
|
|
#define E2P_CMD 0x30
|
|
#define E2P_CMD_BUSY_ 0x80000000
|
|
#define E2P_CMD_READ_ 0x00000000
|
|
#define E2P_CMD_TIMEOUT_ 0x00000400
|
|
#define E2P_CMD_LOADED_ 0x00000200
|
|
#define E2P_CMD_ADDR_ 0x000001FF
|
|
|
|
#define E2P_DATA 0x34
|
|
|
|
#define BURST_CAP 0x38
|
|
|
|
#define INT_EP_CTL 0x68
|
|
#define INT_EP_CTL_PHY_INT_ 0x00008000
|
|
|
|
#define BULK_IN_DLY 0x6C
|
|
|
|
/* MAC CSRs */
|
|
#define MAC_CR 0x100
|
|
#define MAC_CR_MCPAS_ 0x00080000
|
|
#define MAC_CR_PRMS_ 0x00040000
|
|
#define MAC_CR_HPFILT_ 0x00002000
|
|
#define MAC_CR_TXEN_ 0x00000008
|
|
#define MAC_CR_RXEN_ 0x00000004
|
|
|
|
#define ADDRH 0x104
|
|
|
|
#define ADDRL 0x108
|
|
|
|
#define MII_ADDR 0x114
|
|
#define MII_WRITE_ 0x02
|
|
#define MII_BUSY_ 0x01
|
|
#define MII_READ_ 0x00 /* ~of MII Write bit */
|
|
|
|
#define MII_DATA 0x118
|
|
|
|
#define FLOW 0x11C
|
|
|
|
#define VLAN1 0x120
|
|
|
|
#define COE_CR 0x130
|
|
#define Tx_COE_EN_ 0x00010000
|
|
#define Rx_COE_EN_ 0x00000001
|
|
|
|
/* Vendor-specific PHY Definitions */
|
|
#define PHY_INT_SRC 29
|
|
|
|
#define PHY_INT_MASK 30
|
|
#define PHY_INT_MASK_ANEG_COMP_ ((u16)0x0040)
|
|
#define PHY_INT_MASK_LINK_DOWN_ ((u16)0x0010)
|
|
#define PHY_INT_MASK_DEFAULT_ (PHY_INT_MASK_ANEG_COMP_ | \
|
|
PHY_INT_MASK_LINK_DOWN_)
|
|
|
|
/* USB Vendor Requests */
|
|
#define USB_VENDOR_REQUEST_WRITE_REGISTER 0xA0
|
|
#define USB_VENDOR_REQUEST_READ_REGISTER 0xA1
|
|
|
|
/* Some extra defines */
|
|
#define HS_USB_PKT_SIZE 512
|
|
#define FS_USB_PKT_SIZE 64
|
|
/* 5/33 is lower limit for BURST_CAP to work */
|
|
#define DEFAULT_HS_BURST_CAP_SIZE (5 * HS_USB_PKT_SIZE)
|
|
#define DEFAULT_FS_BURST_CAP_SIZE (33 * FS_USB_PKT_SIZE)
|
|
#define DEFAULT_BULK_IN_DELAY 0x00002000
|
|
#define MAX_SINGLE_PACKET_SIZE 2048
|
|
#define EEPROM_MAC_OFFSET 0x01
|
|
#define SMSC95XX_INTERNAL_PHY_ID 1
|
|
#define ETH_P_8021Q 0x8100 /* 802.1Q VLAN Extended Header */
|
|
|
|
/* local defines */
|
|
#define SMSC95XX_BASE_NAME "sms"
|
|
#define USB_CTRL_SET_TIMEOUT 5000
|
|
#define USB_CTRL_GET_TIMEOUT 5000
|
|
#define USB_BULK_SEND_TIMEOUT 5000
|
|
#define USB_BULK_RECV_TIMEOUT 5000
|
|
|
|
#define RX_URB_SIZE DEFAULT_HS_BURST_CAP_SIZE
|
|
#define PHY_CONNECT_TIMEOUT 5000
|
|
|
|
#define TURBO_MODE
|
|
|
|
#ifndef CONFIG_DM_ETH
|
|
/* local vars */
|
|
static int curr_eth_dev; /* index for name of next device detected */
|
|
#endif
|
|
|
|
/* driver private */
|
|
struct smsc95xx_private {
|
|
#ifdef CONFIG_DM_ETH
|
|
struct ueth_data ueth;
|
|
#endif
|
|
size_t rx_urb_size; /* maximum USB URB size */
|
|
u32 mac_cr; /* MAC control register value */
|
|
int have_hwaddr; /* 1 if we have a hardware MAC address */
|
|
};
|
|
|
|
/*
|
|
* Smsc95xx infrastructure commands
|
|
*/
|
|
static int smsc95xx_write_reg(struct usb_device *udev, u32 index, u32 data)
|
|
{
|
|
int len;
|
|
ALLOC_CACHE_ALIGN_BUFFER(u32, tmpbuf, 1);
|
|
|
|
cpu_to_le32s(&data);
|
|
tmpbuf[0] = data;
|
|
|
|
len = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
|
|
USB_VENDOR_REQUEST_WRITE_REGISTER,
|
|
USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
|
|
0, index, tmpbuf, sizeof(data),
|
|
USB_CTRL_SET_TIMEOUT);
|
|
if (len != sizeof(data)) {
|
|
debug("smsc95xx_write_reg failed: index=%d, data=%d, len=%d",
|
|
index, data, len);
|
|
return -EIO;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int smsc95xx_read_reg(struct usb_device *udev, u32 index, u32 *data)
|
|
{
|
|
int len;
|
|
ALLOC_CACHE_ALIGN_BUFFER(u32, tmpbuf, 1);
|
|
|
|
len = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
|
|
USB_VENDOR_REQUEST_READ_REGISTER,
|
|
USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
|
|
0, index, tmpbuf, sizeof(*data),
|
|
USB_CTRL_GET_TIMEOUT);
|
|
*data = tmpbuf[0];
|
|
if (len != sizeof(*data)) {
|
|
debug("smsc95xx_read_reg failed: index=%d, len=%d",
|
|
index, len);
|
|
return -EIO;
|
|
}
|
|
|
|
le32_to_cpus(data);
|
|
return 0;
|
|
}
|
|
|
|
/* Loop until the read is completed with timeout */
|
|
static int smsc95xx_phy_wait_not_busy(struct usb_device *udev)
|
|
{
|
|
unsigned long start_time = get_timer(0);
|
|
u32 val;
|
|
|
|
do {
|
|
smsc95xx_read_reg(udev, MII_ADDR, &val);
|
|
if (!(val & MII_BUSY_))
|
|
return 0;
|
|
} while (get_timer(start_time) < 1000);
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int smsc95xx_mdio_read(struct usb_device *udev, int phy_id, int idx)
|
|
{
|
|
u32 val, addr;
|
|
|
|
/* confirm MII not busy */
|
|
if (smsc95xx_phy_wait_not_busy(udev)) {
|
|
debug("MII is busy in smsc95xx_mdio_read\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
/* set the address, index & direction (read from PHY) */
|
|
addr = (phy_id << 11) | (idx << 6) | MII_READ_;
|
|
smsc95xx_write_reg(udev, MII_ADDR, addr);
|
|
|
|
if (smsc95xx_phy_wait_not_busy(udev)) {
|
|
debug("Timed out reading MII reg %02X\n", idx);
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
smsc95xx_read_reg(udev, MII_DATA, &val);
|
|
|
|
return (u16)(val & 0xFFFF);
|
|
}
|
|
|
|
static void smsc95xx_mdio_write(struct usb_device *udev, int phy_id, int idx,
|
|
int regval)
|
|
{
|
|
u32 val, addr;
|
|
|
|
/* confirm MII not busy */
|
|
if (smsc95xx_phy_wait_not_busy(udev)) {
|
|
debug("MII is busy in smsc95xx_mdio_write\n");
|
|
return;
|
|
}
|
|
|
|
val = regval;
|
|
smsc95xx_write_reg(udev, MII_DATA, val);
|
|
|
|
/* set the address, index & direction (write to PHY) */
|
|
addr = (phy_id << 11) | (idx << 6) | MII_WRITE_;
|
|
smsc95xx_write_reg(udev, MII_ADDR, addr);
|
|
|
|
if (smsc95xx_phy_wait_not_busy(udev))
|
|
debug("Timed out writing MII reg %02X\n", idx);
|
|
}
|
|
|
|
static int smsc95xx_eeprom_confirm_not_busy(struct usb_device *udev)
|
|
{
|
|
unsigned long start_time = get_timer(0);
|
|
u32 val;
|
|
|
|
do {
|
|
smsc95xx_read_reg(udev, E2P_CMD, &val);
|
|
if (!(val & E2P_CMD_BUSY_))
|
|
return 0;
|
|
udelay(40);
|
|
} while (get_timer(start_time) < 1 * 1000 * 1000);
|
|
|
|
debug("EEPROM is busy\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int smsc95xx_wait_eeprom(struct usb_device *udev)
|
|
{
|
|
unsigned long start_time = get_timer(0);
|
|
u32 val;
|
|
|
|
do {
|
|
smsc95xx_read_reg(udev, E2P_CMD, &val);
|
|
if (!(val & E2P_CMD_BUSY_) || (val & E2P_CMD_TIMEOUT_))
|
|
break;
|
|
udelay(40);
|
|
} while (get_timer(start_time) < 1 * 1000 * 1000);
|
|
|
|
if (val & (E2P_CMD_TIMEOUT_ | E2P_CMD_BUSY_)) {
|
|
debug("EEPROM read operation timeout\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int smsc95xx_read_eeprom(struct usb_device *udev, u32 offset, u32 length,
|
|
u8 *data)
|
|
{
|
|
u32 val;
|
|
int i, ret;
|
|
|
|
ret = smsc95xx_eeprom_confirm_not_busy(udev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
for (i = 0; i < length; i++) {
|
|
val = E2P_CMD_BUSY_ | E2P_CMD_READ_ | (offset & E2P_CMD_ADDR_);
|
|
smsc95xx_write_reg(udev, E2P_CMD, val);
|
|
|
|
ret = smsc95xx_wait_eeprom(udev);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
smsc95xx_read_reg(udev, E2P_DATA, &val);
|
|
data[i] = val & 0xFF;
|
|
offset++;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* mii_nway_restart - restart NWay (autonegotiation) for this interface
|
|
*
|
|
* Returns 0 on success, negative on error.
|
|
*/
|
|
static int mii_nway_restart(struct usb_device *udev, struct ueth_data *dev)
|
|
{
|
|
int bmcr;
|
|
int r = -1;
|
|
|
|
/* if autoneg is off, it's an error */
|
|
bmcr = smsc95xx_mdio_read(udev, dev->phy_id, MII_BMCR);
|
|
|
|
if (bmcr & BMCR_ANENABLE) {
|
|
bmcr |= BMCR_ANRESTART;
|
|
smsc95xx_mdio_write(udev, dev->phy_id, MII_BMCR, bmcr);
|
|
r = 0;
|
|
}
|
|
return r;
|
|
}
|
|
|
|
static int smsc95xx_phy_initialize(struct usb_device *udev,
|
|
struct ueth_data *dev)
|
|
{
|
|
smsc95xx_mdio_write(udev, dev->phy_id, MII_BMCR, BMCR_RESET);
|
|
smsc95xx_mdio_write(udev, dev->phy_id, MII_ADVERTISE,
|
|
ADVERTISE_ALL | ADVERTISE_CSMA |
|
|
ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM);
|
|
|
|
/* read to clear */
|
|
smsc95xx_mdio_read(udev, dev->phy_id, PHY_INT_SRC);
|
|
|
|
smsc95xx_mdio_write(udev, dev->phy_id, PHY_INT_MASK,
|
|
PHY_INT_MASK_DEFAULT_);
|
|
mii_nway_restart(udev, dev);
|
|
|
|
debug("phy initialised succesfully\n");
|
|
return 0;
|
|
}
|
|
|
|
static int smsc95xx_init_mac_address(unsigned char *enetaddr,
|
|
struct usb_device *udev)
|
|
{
|
|
int ret;
|
|
|
|
/* try reading mac address from EEPROM */
|
|
ret = smsc95xx_read_eeprom(udev, EEPROM_MAC_OFFSET, ETH_ALEN, enetaddr);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (is_valid_ethaddr(enetaddr)) {
|
|
/* eeprom values are valid so use them */
|
|
debug("MAC address read from EEPROM\n");
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* No eeprom, or eeprom values are invalid. Generating a random MAC
|
|
* address is not safe. Just return an error.
|
|
*/
|
|
debug("Invalid MAC address read from EEPROM\n");
|
|
|
|
return -ENXIO;
|
|
}
|
|
|
|
static int smsc95xx_write_hwaddr_common(struct usb_device *udev,
|
|
struct smsc95xx_private *priv,
|
|
unsigned char *enetaddr)
|
|
{
|
|
u32 addr_lo = get_unaligned_le32(&enetaddr[0]);
|
|
u32 addr_hi = get_unaligned_le16(&enetaddr[4]);
|
|
int ret;
|
|
|
|
/* set hardware address */
|
|
debug("** %s()\n", __func__);
|
|
ret = smsc95xx_write_reg(udev, ADDRL, addr_lo);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = smsc95xx_write_reg(udev, ADDRH, addr_hi);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
debug("MAC %pM\n", enetaddr);
|
|
priv->have_hwaddr = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Enable or disable Tx & Rx checksum offload engines */
|
|
static int smsc95xx_set_csums(struct usb_device *udev, int use_tx_csum,
|
|
int use_rx_csum)
|
|
{
|
|
u32 read_buf;
|
|
int ret = smsc95xx_read_reg(udev, COE_CR, &read_buf);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (use_tx_csum)
|
|
read_buf |= Tx_COE_EN_;
|
|
else
|
|
read_buf &= ~Tx_COE_EN_;
|
|
|
|
if (use_rx_csum)
|
|
read_buf |= Rx_COE_EN_;
|
|
else
|
|
read_buf &= ~Rx_COE_EN_;
|
|
|
|
ret = smsc95xx_write_reg(udev, COE_CR, read_buf);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
debug("COE_CR = 0x%08x\n", read_buf);
|
|
return 0;
|
|
}
|
|
|
|
static void smsc95xx_set_multicast(struct smsc95xx_private *priv)
|
|
{
|
|
/* No multicast in u-boot */
|
|
priv->mac_cr &= ~(MAC_CR_PRMS_ | MAC_CR_MCPAS_ | MAC_CR_HPFILT_);
|
|
}
|
|
|
|
/* starts the TX path */
|
|
static void smsc95xx_start_tx_path(struct usb_device *udev,
|
|
struct smsc95xx_private *priv)
|
|
{
|
|
u32 reg_val;
|
|
|
|
/* Enable Tx at MAC */
|
|
priv->mac_cr |= MAC_CR_TXEN_;
|
|
|
|
smsc95xx_write_reg(udev, MAC_CR, priv->mac_cr);
|
|
|
|
/* Enable Tx at SCSRs */
|
|
reg_val = TX_CFG_ON_;
|
|
smsc95xx_write_reg(udev, TX_CFG, reg_val);
|
|
}
|
|
|
|
/* Starts the Receive path */
|
|
static void smsc95xx_start_rx_path(struct usb_device *udev,
|
|
struct smsc95xx_private *priv)
|
|
{
|
|
priv->mac_cr |= MAC_CR_RXEN_;
|
|
smsc95xx_write_reg(udev, MAC_CR, priv->mac_cr);
|
|
}
|
|
|
|
static int smsc95xx_init_common(struct usb_device *udev, struct ueth_data *dev,
|
|
struct smsc95xx_private *priv,
|
|
unsigned char *enetaddr)
|
|
{
|
|
int ret;
|
|
u32 write_buf;
|
|
u32 read_buf;
|
|
u32 burst_cap;
|
|
int timeout;
|
|
#define TIMEOUT_RESOLUTION 50 /* ms */
|
|
int link_detected;
|
|
|
|
debug("** %s()\n", __func__);
|
|
dev->phy_id = SMSC95XX_INTERNAL_PHY_ID; /* fixed phy id */
|
|
|
|
write_buf = HW_CFG_LRST_;
|
|
ret = smsc95xx_write_reg(udev, HW_CFG, write_buf);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
timeout = 0;
|
|
do {
|
|
ret = smsc95xx_read_reg(udev, HW_CFG, &read_buf);
|
|
if (ret < 0)
|
|
return ret;
|
|
udelay(10 * 1000);
|
|
timeout++;
|
|
} while ((read_buf & HW_CFG_LRST_) && (timeout < 100));
|
|
|
|
if (timeout >= 100) {
|
|
debug("timeout waiting for completion of Lite Reset\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
write_buf = PM_CTL_PHY_RST_;
|
|
ret = smsc95xx_write_reg(udev, PM_CTRL, write_buf);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
timeout = 0;
|
|
do {
|
|
ret = smsc95xx_read_reg(udev, PM_CTRL, &read_buf);
|
|
if (ret < 0)
|
|
return ret;
|
|
udelay(10 * 1000);
|
|
timeout++;
|
|
} while ((read_buf & PM_CTL_PHY_RST_) && (timeout < 100));
|
|
if (timeout >= 100) {
|
|
debug("timeout waiting for PHY Reset\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
#ifndef CONFIG_DM_ETH
|
|
if (!priv->have_hwaddr && smsc95xx_init_mac_address(enetaddr, udev) ==
|
|
0)
|
|
priv->have_hwaddr = 1;
|
|
#endif
|
|
if (!priv->have_hwaddr) {
|
|
puts("Error: SMSC95xx: No MAC address set - set usbethaddr\n");
|
|
return -EADDRNOTAVAIL;
|
|
}
|
|
ret = smsc95xx_write_hwaddr_common(udev, priv, enetaddr);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
#ifdef TURBO_MODE
|
|
if (dev->pusb_dev->speed == USB_SPEED_HIGH) {
|
|
burst_cap = DEFAULT_HS_BURST_CAP_SIZE / HS_USB_PKT_SIZE;
|
|
priv->rx_urb_size = DEFAULT_HS_BURST_CAP_SIZE;
|
|
} else {
|
|
burst_cap = DEFAULT_FS_BURST_CAP_SIZE / FS_USB_PKT_SIZE;
|
|
priv->rx_urb_size = DEFAULT_FS_BURST_CAP_SIZE;
|
|
}
|
|
#else
|
|
burst_cap = 0;
|
|
priv->rx_urb_size = MAX_SINGLE_PACKET_SIZE;
|
|
#endif
|
|
debug("rx_urb_size=%ld\n", (ulong)priv->rx_urb_size);
|
|
|
|
ret = smsc95xx_write_reg(udev, BURST_CAP, burst_cap);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = smsc95xx_read_reg(udev, BURST_CAP, &read_buf);
|
|
if (ret < 0)
|
|
return ret;
|
|
debug("Read Value from BURST_CAP after writing: 0x%08x\n", read_buf);
|
|
|
|
read_buf = DEFAULT_BULK_IN_DELAY;
|
|
ret = smsc95xx_write_reg(udev, BULK_IN_DLY, read_buf);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = smsc95xx_read_reg(udev, BULK_IN_DLY, &read_buf);
|
|
if (ret < 0)
|
|
return ret;
|
|
debug("Read Value from BULK_IN_DLY after writing: "
|
|
"0x%08x\n", read_buf);
|
|
|
|
ret = smsc95xx_read_reg(udev, HW_CFG, &read_buf);
|
|
if (ret < 0)
|
|
return ret;
|
|
debug("Read Value from HW_CFG: 0x%08x\n", read_buf);
|
|
|
|
#ifdef TURBO_MODE
|
|
read_buf |= (HW_CFG_MEF_ | HW_CFG_BCE_);
|
|
#endif
|
|
read_buf &= ~HW_CFG_RXDOFF_;
|
|
|
|
#define NET_IP_ALIGN 0
|
|
read_buf |= NET_IP_ALIGN << 9;
|
|
|
|
ret = smsc95xx_write_reg(udev, HW_CFG, read_buf);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = smsc95xx_read_reg(udev, HW_CFG, &read_buf);
|
|
if (ret < 0)
|
|
return ret;
|
|
debug("Read Value from HW_CFG after writing: 0x%08x\n", read_buf);
|
|
|
|
write_buf = 0xFFFFFFFF;
|
|
ret = smsc95xx_write_reg(udev, INT_STS, write_buf);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = smsc95xx_read_reg(udev, ID_REV, &read_buf);
|
|
if (ret < 0)
|
|
return ret;
|
|
debug("ID_REV = 0x%08x\n", read_buf);
|
|
|
|
/* Configure GPIO pins as LED outputs */
|
|
write_buf = LED_GPIO_CFG_SPD_LED | LED_GPIO_CFG_LNK_LED |
|
|
LED_GPIO_CFG_FDX_LED;
|
|
ret = smsc95xx_write_reg(udev, LED_GPIO_CFG, write_buf);
|
|
if (ret < 0)
|
|
return ret;
|
|
debug("LED_GPIO_CFG set\n");
|
|
|
|
/* Init Tx */
|
|
write_buf = 0;
|
|
ret = smsc95xx_write_reg(udev, FLOW, write_buf);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
read_buf = AFC_CFG_DEFAULT;
|
|
ret = smsc95xx_write_reg(udev, AFC_CFG, read_buf);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = smsc95xx_read_reg(udev, MAC_CR, &priv->mac_cr);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Init Rx. Set Vlan */
|
|
write_buf = (u32)ETH_P_8021Q;
|
|
ret = smsc95xx_write_reg(udev, VLAN1, write_buf);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Disable checksum offload engines */
|
|
ret = smsc95xx_set_csums(udev, 0, 0);
|
|
if (ret < 0) {
|
|
debug("Failed to set csum offload: %d\n", ret);
|
|
return ret;
|
|
}
|
|
smsc95xx_set_multicast(priv);
|
|
|
|
ret = smsc95xx_phy_initialize(udev, dev);
|
|
if (ret < 0)
|
|
return ret;
|
|
ret = smsc95xx_read_reg(udev, INT_EP_CTL, &read_buf);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* enable PHY interrupts */
|
|
read_buf |= INT_EP_CTL_PHY_INT_;
|
|
|
|
ret = smsc95xx_write_reg(udev, INT_EP_CTL, read_buf);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
smsc95xx_start_tx_path(udev, priv);
|
|
smsc95xx_start_rx_path(udev, priv);
|
|
|
|
timeout = 0;
|
|
do {
|
|
link_detected = smsc95xx_mdio_read(udev, dev->phy_id, MII_BMSR)
|
|
& BMSR_LSTATUS;
|
|
if (!link_detected) {
|
|
if (timeout == 0)
|
|
printf("Waiting for Ethernet connection... ");
|
|
udelay(TIMEOUT_RESOLUTION * 1000);
|
|
timeout += TIMEOUT_RESOLUTION;
|
|
}
|
|
} while (!link_detected && timeout < PHY_CONNECT_TIMEOUT);
|
|
if (link_detected) {
|
|
if (timeout != 0)
|
|
printf("done.\n");
|
|
} else {
|
|
printf("unable to connect.\n");
|
|
return -EIO;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int smsc95xx_send_common(struct ueth_data *dev, void *packet, int length)
|
|
{
|
|
int err;
|
|
int actual_len;
|
|
u32 tx_cmd_a;
|
|
u32 tx_cmd_b;
|
|
ALLOC_CACHE_ALIGN_BUFFER(unsigned char, msg,
|
|
PKTSIZE + sizeof(tx_cmd_a) + sizeof(tx_cmd_b));
|
|
|
|
debug("** %s(), len %d, buf %#x\n", __func__, length,
|
|
(unsigned int)(ulong)msg);
|
|
if (length > PKTSIZE)
|
|
return -ENOSPC;
|
|
|
|
tx_cmd_a = (u32)length | TX_CMD_A_FIRST_SEG_ | TX_CMD_A_LAST_SEG_;
|
|
tx_cmd_b = (u32)length;
|
|
cpu_to_le32s(&tx_cmd_a);
|
|
cpu_to_le32s(&tx_cmd_b);
|
|
|
|
/* prepend cmd_a and cmd_b */
|
|
memcpy(msg, &tx_cmd_a, sizeof(tx_cmd_a));
|
|
memcpy(msg + sizeof(tx_cmd_a), &tx_cmd_b, sizeof(tx_cmd_b));
|
|
memcpy(msg + sizeof(tx_cmd_a) + sizeof(tx_cmd_b), (void *)packet,
|
|
length);
|
|
err = usb_bulk_msg(dev->pusb_dev,
|
|
usb_sndbulkpipe(dev->pusb_dev, dev->ep_out),
|
|
(void *)msg,
|
|
length + sizeof(tx_cmd_a) + sizeof(tx_cmd_b),
|
|
&actual_len,
|
|
USB_BULK_SEND_TIMEOUT);
|
|
debug("Tx: len = %u, actual = %u, err = %d\n",
|
|
(unsigned int)(length + sizeof(tx_cmd_a) + sizeof(tx_cmd_b)),
|
|
(unsigned int)actual_len, err);
|
|
|
|
return err;
|
|
}
|
|
|
|
#ifndef CONFIG_DM_ETH
|
|
/*
|
|
* Smsc95xx callbacks
|
|
*/
|
|
static int smsc95xx_init(struct eth_device *eth, bd_t *bd)
|
|
{
|
|
struct ueth_data *dev = (struct ueth_data *)eth->priv;
|
|
struct usb_device *udev = dev->pusb_dev;
|
|
struct smsc95xx_private *priv =
|
|
(struct smsc95xx_private *)dev->dev_priv;
|
|
|
|
return smsc95xx_init_common(udev, dev, priv, eth->enetaddr);
|
|
}
|
|
|
|
static int smsc95xx_send(struct eth_device *eth, void *packet, int length)
|
|
{
|
|
struct ueth_data *dev = (struct ueth_data *)eth->priv;
|
|
|
|
return smsc95xx_send_common(dev, packet, length);
|
|
}
|
|
|
|
static int smsc95xx_recv(struct eth_device *eth)
|
|
{
|
|
struct ueth_data *dev = (struct ueth_data *)eth->priv;
|
|
DEFINE_CACHE_ALIGN_BUFFER(unsigned char, recv_buf, RX_URB_SIZE);
|
|
unsigned char *buf_ptr;
|
|
int err;
|
|
int actual_len;
|
|
u32 packet_len;
|
|
int cur_buf_align;
|
|
|
|
debug("** %s()\n", __func__);
|
|
err = usb_bulk_msg(dev->pusb_dev,
|
|
usb_rcvbulkpipe(dev->pusb_dev, dev->ep_in),
|
|
(void *)recv_buf, RX_URB_SIZE, &actual_len,
|
|
USB_BULK_RECV_TIMEOUT);
|
|
debug("Rx: len = %u, actual = %u, err = %d\n", RX_URB_SIZE,
|
|
actual_len, err);
|
|
if (err != 0) {
|
|
debug("Rx: failed to receive\n");
|
|
return -err;
|
|
}
|
|
if (actual_len > RX_URB_SIZE) {
|
|
debug("Rx: received too many bytes %d\n", actual_len);
|
|
return -ENOSPC;
|
|
}
|
|
|
|
buf_ptr = recv_buf;
|
|
while (actual_len > 0) {
|
|
/*
|
|
* 1st 4 bytes contain the length of the actual data plus error
|
|
* info. Extract data length.
|
|
*/
|
|
if (actual_len < sizeof(packet_len)) {
|
|
debug("Rx: incomplete packet length\n");
|
|
return -EIO;
|
|
}
|
|
memcpy(&packet_len, buf_ptr, sizeof(packet_len));
|
|
le32_to_cpus(&packet_len);
|
|
if (packet_len & RX_STS_ES_) {
|
|
debug("Rx: Error header=%#x", packet_len);
|
|
return -EIO;
|
|
}
|
|
packet_len = ((packet_len & RX_STS_FL_) >> 16);
|
|
|
|
if (packet_len > actual_len - sizeof(packet_len)) {
|
|
debug("Rx: too large packet: %d\n", packet_len);
|
|
return -EIO;
|
|
}
|
|
|
|
/* Notify net stack */
|
|
net_process_received_packet(buf_ptr + sizeof(packet_len),
|
|
packet_len - 4);
|
|
|
|
/* Adjust for next iteration */
|
|
actual_len -= sizeof(packet_len) + packet_len;
|
|
buf_ptr += sizeof(packet_len) + packet_len;
|
|
cur_buf_align = (ulong)buf_ptr - (ulong)recv_buf;
|
|
|
|
if (cur_buf_align & 0x03) {
|
|
int align = 4 - (cur_buf_align & 0x03);
|
|
|
|
actual_len -= align;
|
|
buf_ptr += align;
|
|
}
|
|
}
|
|
return err;
|
|
}
|
|
|
|
static void smsc95xx_halt(struct eth_device *eth)
|
|
{
|
|
debug("** %s()\n", __func__);
|
|
}
|
|
|
|
static int smsc95xx_write_hwaddr(struct eth_device *eth)
|
|
{
|
|
struct ueth_data *dev = eth->priv;
|
|
struct usb_device *udev = dev->pusb_dev;
|
|
struct smsc95xx_private *priv = dev->dev_priv;
|
|
|
|
return smsc95xx_write_hwaddr_common(udev, priv, eth->enetaddr);
|
|
}
|
|
|
|
/*
|
|
* SMSC probing functions
|
|
*/
|
|
void smsc95xx_eth_before_probe(void)
|
|
{
|
|
curr_eth_dev = 0;
|
|
}
|
|
|
|
struct smsc95xx_dongle {
|
|
unsigned short vendor;
|
|
unsigned short product;
|
|
};
|
|
|
|
static const struct smsc95xx_dongle smsc95xx_dongles[] = {
|
|
{ 0x0424, 0xec00 }, /* LAN9512/LAN9514 Ethernet */
|
|
{ 0x0424, 0x9500 }, /* LAN9500 Ethernet */
|
|
{ 0x0424, 0x9730 }, /* LAN9730 Ethernet (HSIC) */
|
|
{ 0x0424, 0x9900 }, /* SMSC9500 USB Ethernet Device (SAL10) */
|
|
{ 0x0424, 0x9e00 }, /* LAN9500A Ethernet */
|
|
{ 0x0000, 0x0000 } /* END - Do not remove */
|
|
};
|
|
|
|
/* Probe to see if a new device is actually an SMSC device */
|
|
int smsc95xx_eth_probe(struct usb_device *dev, unsigned int ifnum,
|
|
struct ueth_data *ss)
|
|
{
|
|
struct usb_interface *iface;
|
|
struct usb_interface_descriptor *iface_desc;
|
|
int i;
|
|
|
|
/* let's examine the device now */
|
|
iface = &dev->config.if_desc[ifnum];
|
|
iface_desc = &dev->config.if_desc[ifnum].desc;
|
|
|
|
for (i = 0; smsc95xx_dongles[i].vendor != 0; i++) {
|
|
if (dev->descriptor.idVendor == smsc95xx_dongles[i].vendor &&
|
|
dev->descriptor.idProduct == smsc95xx_dongles[i].product)
|
|
/* Found a supported dongle */
|
|
break;
|
|
}
|
|
if (smsc95xx_dongles[i].vendor == 0)
|
|
return 0;
|
|
|
|
/* At this point, we know we've got a live one */
|
|
debug("\n\nUSB Ethernet device detected\n");
|
|
memset(ss, '\0', sizeof(struct ueth_data));
|
|
|
|
/* Initialize the ueth_data structure with some useful info */
|
|
ss->ifnum = ifnum;
|
|
ss->pusb_dev = dev;
|
|
ss->subclass = iface_desc->bInterfaceSubClass;
|
|
ss->protocol = iface_desc->bInterfaceProtocol;
|
|
|
|
/*
|
|
* We are expecting a minimum of 3 endpoints - in, out (bulk), and int.
|
|
* We will ignore any others.
|
|
*/
|
|
for (i = 0; i < iface_desc->bNumEndpoints; i++) {
|
|
/* is it an BULK endpoint? */
|
|
if ((iface->ep_desc[i].bmAttributes &
|
|
USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK) {
|
|
if (iface->ep_desc[i].bEndpointAddress & USB_DIR_IN)
|
|
ss->ep_in =
|
|
iface->ep_desc[i].bEndpointAddress &
|
|
USB_ENDPOINT_NUMBER_MASK;
|
|
else
|
|
ss->ep_out =
|
|
iface->ep_desc[i].bEndpointAddress &
|
|
USB_ENDPOINT_NUMBER_MASK;
|
|
}
|
|
|
|
/* is it an interrupt endpoint? */
|
|
if ((iface->ep_desc[i].bmAttributes &
|
|
USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) {
|
|
ss->ep_int = iface->ep_desc[i].bEndpointAddress &
|
|
USB_ENDPOINT_NUMBER_MASK;
|
|
ss->irqinterval = iface->ep_desc[i].bInterval;
|
|
}
|
|
}
|
|
debug("Endpoints In %d Out %d Int %d\n",
|
|
ss->ep_in, ss->ep_out, ss->ep_int);
|
|
|
|
/* Do some basic sanity checks, and bail if we find a problem */
|
|
if (usb_set_interface(dev, iface_desc->bInterfaceNumber, 0) ||
|
|
!ss->ep_in || !ss->ep_out || !ss->ep_int) {
|
|
debug("Problems with device\n");
|
|
return 0;
|
|
}
|
|
dev->privptr = (void *)ss;
|
|
|
|
/* alloc driver private */
|
|
ss->dev_priv = calloc(1, sizeof(struct smsc95xx_private));
|
|
if (!ss->dev_priv)
|
|
return 0;
|
|
|
|
return 1;
|
|
}
|
|
|
|
int smsc95xx_eth_get_info(struct usb_device *dev, struct ueth_data *ss,
|
|
struct eth_device *eth)
|
|
{
|
|
debug("** %s()\n", __func__);
|
|
if (!eth) {
|
|
debug("%s: missing parameter.\n", __func__);
|
|
return 0;
|
|
}
|
|
sprintf(eth->name, "%s%d", SMSC95XX_BASE_NAME, curr_eth_dev++);
|
|
eth->init = smsc95xx_init;
|
|
eth->send = smsc95xx_send;
|
|
eth->recv = smsc95xx_recv;
|
|
eth->halt = smsc95xx_halt;
|
|
eth->write_hwaddr = smsc95xx_write_hwaddr;
|
|
eth->priv = ss;
|
|
return 1;
|
|
}
|
|
#endif /* !CONFIG_DM_ETH */
|
|
|
|
#ifdef CONFIG_DM_ETH
|
|
static int smsc95xx_eth_start(struct udevice *dev)
|
|
{
|
|
struct usb_device *udev = dev_get_parent_priv(dev);
|
|
struct smsc95xx_private *priv = dev_get_priv(dev);
|
|
struct eth_pdata *pdata = dev_get_platdata(dev);
|
|
|
|
/* Driver-model Ethernet ensures we have this */
|
|
priv->have_hwaddr = 1;
|
|
|
|
return smsc95xx_init_common(udev, &priv->ueth, priv, pdata->enetaddr);
|
|
}
|
|
|
|
void smsc95xx_eth_stop(struct udevice *dev)
|
|
{
|
|
debug("** %s()\n", __func__);
|
|
}
|
|
|
|
int smsc95xx_eth_send(struct udevice *dev, void *packet, int length)
|
|
{
|
|
struct smsc95xx_private *priv = dev_get_priv(dev);
|
|
|
|
return smsc95xx_send_common(&priv->ueth, packet, length);
|
|
}
|
|
|
|
int smsc95xx_eth_recv(struct udevice *dev, int flags, uchar **packetp)
|
|
{
|
|
struct smsc95xx_private *priv = dev_get_priv(dev);
|
|
struct ueth_data *ueth = &priv->ueth;
|
|
uint8_t *ptr;
|
|
int ret, len;
|
|
u32 packet_len;
|
|
|
|
len = usb_ether_get_rx_bytes(ueth, &ptr);
|
|
debug("%s: first try, len=%d\n", __func__, len);
|
|
if (!len) {
|
|
if (!(flags & ETH_RECV_CHECK_DEVICE))
|
|
return -EAGAIN;
|
|
ret = usb_ether_receive(ueth, RX_URB_SIZE);
|
|
if (ret == -EAGAIN)
|
|
return ret;
|
|
|
|
len = usb_ether_get_rx_bytes(ueth, &ptr);
|
|
debug("%s: second try, len=%d\n", __func__, len);
|
|
}
|
|
|
|
/*
|
|
* 1st 4 bytes contain the length of the actual data plus error info.
|
|
* Extract data length.
|
|
*/
|
|
if (len < sizeof(packet_len)) {
|
|
debug("Rx: incomplete packet length\n");
|
|
goto err;
|
|
}
|
|
memcpy(&packet_len, ptr, sizeof(packet_len));
|
|
le32_to_cpus(&packet_len);
|
|
if (packet_len & RX_STS_ES_) {
|
|
debug("Rx: Error header=%#x", packet_len);
|
|
goto err;
|
|
}
|
|
packet_len = ((packet_len & RX_STS_FL_) >> 16);
|
|
|
|
if (packet_len > len - sizeof(packet_len)) {
|
|
debug("Rx: too large packet: %d\n", packet_len);
|
|
goto err;
|
|
}
|
|
|
|
*packetp = ptr + sizeof(packet_len);
|
|
return packet_len - 4;
|
|
|
|
err:
|
|
usb_ether_advance_rxbuf(ueth, -1);
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int smsc95xx_free_pkt(struct udevice *dev, uchar *packet, int packet_len)
|
|
{
|
|
struct smsc95xx_private *priv = dev_get_priv(dev);
|
|
|
|
packet_len = ALIGN(packet_len + sizeof(u32), 4);
|
|
usb_ether_advance_rxbuf(&priv->ueth, sizeof(u32) + packet_len);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int smsc95xx_write_hwaddr(struct udevice *dev)
|
|
{
|
|
struct usb_device *udev = dev_get_parent_priv(dev);
|
|
struct eth_pdata *pdata = dev_get_platdata(dev);
|
|
struct smsc95xx_private *priv = dev_get_priv(dev);
|
|
|
|
return smsc95xx_write_hwaddr_common(udev, priv, pdata->enetaddr);
|
|
}
|
|
|
|
int smsc95xx_read_rom_hwaddr(struct udevice *dev)
|
|
{
|
|
struct usb_device *udev = dev_get_parent_priv(dev);
|
|
struct eth_pdata *pdata = dev_get_platdata(dev);
|
|
int ret;
|
|
|
|
ret = smsc95xx_init_mac_address(pdata->enetaddr, udev);
|
|
if (ret)
|
|
memset(pdata->enetaddr, 0, 6);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int smsc95xx_eth_probe(struct udevice *dev)
|
|
{
|
|
struct smsc95xx_private *priv = dev_get_priv(dev);
|
|
struct ueth_data *ueth = &priv->ueth;
|
|
|
|
return usb_ether_register(dev, ueth, RX_URB_SIZE);
|
|
}
|
|
|
|
static const struct eth_ops smsc95xx_eth_ops = {
|
|
.start = smsc95xx_eth_start,
|
|
.send = smsc95xx_eth_send,
|
|
.recv = smsc95xx_eth_recv,
|
|
.free_pkt = smsc95xx_free_pkt,
|
|
.stop = smsc95xx_eth_stop,
|
|
.write_hwaddr = smsc95xx_write_hwaddr,
|
|
.read_rom_hwaddr = smsc95xx_read_rom_hwaddr,
|
|
};
|
|
|
|
U_BOOT_DRIVER(smsc95xx_eth) = {
|
|
.name = "smsc95xx_eth",
|
|
.id = UCLASS_ETH,
|
|
.probe = smsc95xx_eth_probe,
|
|
.ops = &smsc95xx_eth_ops,
|
|
.priv_auto_alloc_size = sizeof(struct smsc95xx_private),
|
|
.platdata_auto_alloc_size = sizeof(struct eth_pdata),
|
|
};
|
|
|
|
static const struct usb_device_id smsc95xx_eth_id_table[] = {
|
|
{ USB_DEVICE(0x05ac, 0x1402) },
|
|
{ USB_DEVICE(0x0424, 0xec00) }, /* LAN9512/LAN9514 Ethernet */
|
|
{ USB_DEVICE(0x0424, 0x9500) }, /* LAN9500 Ethernet */
|
|
{ USB_DEVICE(0x0424, 0x9730) }, /* LAN9730 Ethernet (HSIC) */
|
|
{ USB_DEVICE(0x0424, 0x9900) }, /* SMSC9500 USB Ethernet (SAL10) */
|
|
{ USB_DEVICE(0x0424, 0x9e00) }, /* LAN9500A Ethernet */
|
|
{ } /* Terminating entry */
|
|
};
|
|
|
|
U_BOOT_USB_DEVICE(smsc95xx_eth, smsc95xx_eth_id_table);
|
|
#endif
|