u-boot/arch/arm/mach-omap2/hwinit-common.c
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

331 lines
6.5 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
*
* Common functions for OMAP4/5 based boards
*
* (C) Copyright 2010
* Texas Instruments, <www.ti.com>
*
* Author :
* Aneesh V <aneesh@ti.com>
* Steve Sakoman <steve@sakoman.com>
*/
#include <common.h>
#include <debug_uart.h>
#include <spl.h>
#include <asm/arch/sys_proto.h>
#include <linux/sizes.h>
#include <asm/emif.h>
#include <asm/omap_common.h>
#include <linux/compiler.h>
#include <asm/system.h>
DECLARE_GLOBAL_DATA_PTR;
void do_set_mux(u32 base, struct pad_conf_entry const *array, int size)
{
int i;
struct pad_conf_entry *pad = (struct pad_conf_entry *) array;
for (i = 0; i < size; i++, pad++)
writew(pad->val, base + pad->offset);
}
static void set_mux_conf_regs(void)
{
switch (omap_hw_init_context()) {
case OMAP_INIT_CONTEXT_SPL:
set_muxconf_regs();
break;
case OMAP_INIT_CONTEXT_UBOOT_AFTER_SPL:
break;
case OMAP_INIT_CONTEXT_UBOOT_FROM_NOR:
case OMAP_INIT_CONTEXT_UBOOT_AFTER_CH:
set_muxconf_regs();
break;
}
}
u32 cortex_rev(void)
{
unsigned int rev;
/* Read Main ID Register (MIDR) */
asm ("mrc p15, 0, %0, c0, c0, 0" : "=r" (rev));
return rev;
}
static void omap_rev_string(void)
{
u32 omap_rev = omap_revision();
u32 soc_variant = (omap_rev & 0xF0000000) >> 28;
u32 omap_variant = (omap_rev & 0xFFFF0000) >> 16;
u32 major_rev = (omap_rev & 0x00000F00) >> 8;
u32 minor_rev = (omap_rev & 0x000000F0) >> 4;
const char *sec_s, *package = NULL;
switch (get_device_type()) {
case TST_DEVICE:
sec_s = "TST";
break;
case EMU_DEVICE:
sec_s = "EMU";
break;
case HS_DEVICE:
sec_s = "HS";
break;
case GP_DEVICE:
sec_s = "GP";
break;
default:
sec_s = "?";
}
#if defined(CONFIG_DRA7XX)
if (is_dra76x()) {
switch (omap_rev & 0xF) {
case DRA762_ABZ_PACKAGE:
package = "ABZ";
break;
case DRA762_ACD_PACKAGE:
default:
package = "ACD";
break;
}
}
#endif
if (soc_variant)
printf("OMAP");
else
printf("DRA");
printf("%x-%s ES%x.%x", omap_variant, sec_s, major_rev, minor_rev);
if (package)
printf(" %s package\n", package);
else
puts("\n");
}
#ifdef CONFIG_SPL_BUILD
void spl_display_print(void)
{
omap_rev_string();
}
#endif
void __weak srcomp_enable(void)
{
}
/**
* do_board_detect() - Detect board description
*
* Function to detect board description. This is expected to be
* overridden in the SoC family board file where desired.
*/
void __weak do_board_detect(void)
{
}
/**
* vcores_init() - Assign omap_vcores based on board
*
* Function to pick the vcores based on board. This is expected to be
* overridden in the SoC family board file where desired.
*/
void __weak vcores_init(void)
{
}
void s_init(void)
{
}
/**
* init_package_revision() - Initialize package revision
*
* Function to get the pacakage information. This is expected to be
* overridden in the SoC family file where desired.
*/
void __weak init_package_revision(void)
{
}
/**
* early_system_init - Does Early system initialization.
*
* Does early system init of watchdog, muxing, andclocks
* Watchdog disable is done always. For the rest what gets done
* depends on the boot mode in which this function is executed when
* 1. SPL running from SRAM
* 2. U-Boot running from FLASH
* 3. U-Boot loaded to SDRAM by SPL
* 4. U-Boot loaded to SDRAM by ROM code using the
* Configuration Header feature
* Please have a look at the respective functions to see what gets
* done in each of these cases
* This function is called with SRAM stack.
*/
void early_system_init(void)
{
init_omap_revision();
hw_data_init();
init_package_revision();
#ifdef CONFIG_SPL_BUILD
if (warm_reset())
force_emif_self_refresh();
#endif
watchdog_init();
set_mux_conf_regs();
#ifdef CONFIG_SPL_BUILD
srcomp_enable();
do_io_settings();
#endif
setup_early_clocks();
#ifdef CONFIG_SPL_BUILD
/*
* Save the boot parameters passed from romcode.
* We cannot delay the saving further than this,
* to prevent overwrites.
*/
save_omap_boot_params();
#endif
do_board_detect();
#ifdef CONFIG_SPL_BUILD
spl_early_init();
#endif
vcores_init();
#ifdef CONFIG_DEBUG_UART_OMAP
debug_uart_init();
#endif
prcm_init();
}
#ifdef CONFIG_SPL_BUILD
void board_init_f(ulong dummy)
{
early_system_init();
#ifdef CONFIG_BOARD_EARLY_INIT_F
board_early_init_f();
#endif
/* For regular u-boot sdram_init() is called from dram_init() */
sdram_init();
gd->ram_size = omap_sdram_size();
}
#endif
int arch_cpu_init_dm(void)
{
early_system_init();
return 0;
}
/*
* Routine: wait_for_command_complete
* Description: Wait for posting to finish on watchdog
*/
void wait_for_command_complete(struct watchdog *wd_base)
{
int pending = 1;
do {
pending = readl(&wd_base->wwps);
} while (pending);
}
/*
* Routine: watchdog_init
* Description: Shut down watch dogs
*/
void watchdog_init(void)
{
struct watchdog *wd2_base = (struct watchdog *)WDT2_BASE;
writel(WD_UNLOCK1, &wd2_base->wspr);
wait_for_command_complete(wd2_base);
writel(WD_UNLOCK2, &wd2_base->wspr);
}
/*
* This function finds the SDRAM size available in the system
* based on DMM section configurations
* This is needed because the size of memory installed may be
* different on different versions of the board
*/
u32 omap_sdram_size(void)
{
u32 section, i, valid;
u64 sdram_start = 0, sdram_end = 0, addr,
size, total_size = 0, trap_size = 0, trap_start = 0;
for (i = 0; i < 4; i++) {
section = __raw_readl(DMM_BASE + i*4);
valid = (section & EMIF_SDRC_ADDRSPC_MASK) >>
(EMIF_SDRC_ADDRSPC_SHIFT);
addr = section & EMIF_SYS_ADDR_MASK;
/* See if the address is valid */
if ((addr >= TI_ARMV7_DRAM_ADDR_SPACE_START) &&
(addr < TI_ARMV7_DRAM_ADDR_SPACE_END)) {
size = ((section & EMIF_SYS_SIZE_MASK) >>
EMIF_SYS_SIZE_SHIFT);
size = 1 << size;
size *= SZ_16M;
if (valid != DMM_SDRC_ADDR_SPC_INVALID) {
if (!sdram_start || (addr < sdram_start))
sdram_start = addr;
if (!sdram_end || ((addr + size) > sdram_end))
sdram_end = addr + size;
} else {
trap_size = size;
trap_start = addr;
}
}
}
if ((trap_start >= sdram_start) && (trap_start < sdram_end))
total_size = (sdram_end - sdram_start) - (trap_size);
else
total_size = sdram_end - sdram_start;
return total_size;
}
/*
* Routine: dram_init
* Description: sets uboots idea of sdram size
*/
int dram_init(void)
{
sdram_init();
gd->ram_size = omap_sdram_size();
return 0;
}
/*
* Print board information
*/
int checkboard(void)
{
puts(sysinfo.board_string);
return 0;
}
#if defined(CONFIG_DISPLAY_CPUINFO)
/*
* Print CPU information
*/
int print_cpuinfo(void)
{
puts("CPU : ");
omap_rev_string();
return 0;
}
#endif