mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-04 18:41:03 +00:00
e895a4b06f
This function can fail if the device tree runs out of space. Rather than silently booting with an incomplete device tree, allow the failure to be detected. Unfortunately this involves changing a lot of places in the code. I have not changed behvaiour to return an error where one is not currently returned, to avoid unexpected breakage. Eventually it would be nice to allow boards to register functions to be called to update the device tree. This would avoid all the many functions to do this. However it's not clear yet if this should be done using driver model or with a linker list. This work is left for later. Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Anatolij Gustschin <agust@denx.de>
261 lines
5.8 KiB
C
261 lines
5.8 KiB
C
/*
|
|
* Copyright 2007 Wind River Systemes, Inc. <www.windriver.com>
|
|
* Copyright 2007 Embedded Specialties, Inc.
|
|
* Joe Hamman joe.hamman@embeddedspecialties.com
|
|
*
|
|
* Copyright 2004 Freescale Semiconductor.
|
|
* Jeff Brown
|
|
* Srikanth Srinivasan (srikanth.srinivasan@freescale.com)
|
|
*
|
|
* (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <pci.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/immap_86xx.h>
|
|
#include <asm/fsl_pci.h>
|
|
#include <fsl_ddr_sdram.h>
|
|
#include <asm/fsl_serdes.h>
|
|
#include <libfdt.h>
|
|
#include <fdt_support.h>
|
|
|
|
long int fixed_sdram (void);
|
|
|
|
int board_early_init_f (void)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
int checkboard (void)
|
|
{
|
|
puts ("Board: Wind River SBC8641D\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
phys_size_t initdram (int board_type)
|
|
{
|
|
long dram_size = 0;
|
|
|
|
#if defined(CONFIG_SPD_EEPROM)
|
|
dram_size = fsl_ddr_sdram();
|
|
#else
|
|
dram_size = fixed_sdram ();
|
|
#endif
|
|
|
|
debug (" DDR: ");
|
|
return dram_size;
|
|
}
|
|
|
|
#if defined(CONFIG_SYS_DRAM_TEST)
|
|
int testdram (void)
|
|
{
|
|
uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START;
|
|
uint *pend = (uint *) CONFIG_SYS_MEMTEST_END;
|
|
uint *p;
|
|
|
|
puts ("SDRAM test phase 1:\n");
|
|
for (p = pstart; p < pend; p++)
|
|
*p = 0xaaaaaaaa;
|
|
|
|
for (p = pstart; p < pend; p++) {
|
|
if (*p != 0xaaaaaaaa) {
|
|
printf ("SDRAM test fails at: %08x\n", (uint) p);
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
puts ("SDRAM test phase 2:\n");
|
|
for (p = pstart; p < pend; p++)
|
|
*p = 0x55555555;
|
|
|
|
for (p = pstart; p < pend; p++) {
|
|
if (*p != 0x55555555) {
|
|
printf ("SDRAM test fails at: %08x\n", (uint) p);
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
puts ("SDRAM test passed.\n");
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
#if !defined(CONFIG_SPD_EEPROM)
|
|
/*
|
|
* Fixed sdram init -- doesn't use serial presence detect.
|
|
*/
|
|
long int fixed_sdram (void)
|
|
{
|
|
#if !defined(CONFIG_SYS_RAMBOOT)
|
|
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
|
|
volatile struct ccsr_ddr *ddr = &immap->im_ddr1;
|
|
|
|
ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
|
|
ddr->cs1_bnds = CONFIG_SYS_DDR_CS1_BNDS;
|
|
ddr->cs2_bnds = CONFIG_SYS_DDR_CS2_BNDS;
|
|
ddr->cs3_bnds = CONFIG_SYS_DDR_CS3_BNDS;
|
|
ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;
|
|
ddr->cs1_config = CONFIG_SYS_DDR_CS1_CONFIG;
|
|
ddr->cs2_config = CONFIG_SYS_DDR_CS2_CONFIG;
|
|
ddr->cs3_config = CONFIG_SYS_DDR_CS3_CONFIG;
|
|
ddr->timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3;
|
|
ddr->timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0;
|
|
ddr->timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
|
|
ddr->timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
|
|
ddr->sdram_cfg = CONFIG_SYS_DDR_CFG_1A;
|
|
ddr->sdram_cfg_2 = CONFIG_SYS_DDR_CFG_2;
|
|
ddr->sdram_mode = CONFIG_SYS_DDR_MODE_1;
|
|
ddr->sdram_mode_2 = CONFIG_SYS_DDR_MODE_2;
|
|
ddr->sdram_md_cntl = CONFIG_SYS_DDR_MODE_CTL;
|
|
ddr->sdram_interval = CONFIG_SYS_DDR_INTERVAL;
|
|
ddr->sdram_data_init = CONFIG_SYS_DDR_DATA_INIT;
|
|
ddr->sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL;
|
|
|
|
asm ("sync;isync");
|
|
|
|
udelay (500);
|
|
|
|
ddr->sdram_cfg = CONFIG_SYS_DDR_CFG_1B;
|
|
asm ("sync; isync");
|
|
|
|
udelay (500);
|
|
ddr = &immap->im_ddr2;
|
|
|
|
ddr->cs0_bnds = CONFIG_SYS_DDR2_CS0_BNDS;
|
|
ddr->cs1_bnds = CONFIG_SYS_DDR2_CS1_BNDS;
|
|
ddr->cs2_bnds = CONFIG_SYS_DDR2_CS2_BNDS;
|
|
ddr->cs3_bnds = CONFIG_SYS_DDR2_CS3_BNDS;
|
|
ddr->cs0_config = CONFIG_SYS_DDR2_CS0_CONFIG;
|
|
ddr->cs1_config = CONFIG_SYS_DDR2_CS1_CONFIG;
|
|
ddr->cs2_config = CONFIG_SYS_DDR2_CS2_CONFIG;
|
|
ddr->cs3_config = CONFIG_SYS_DDR2_CS3_CONFIG;
|
|
ddr->timing_cfg_3 = CONFIG_SYS_DDR2_EXT_REFRESH;
|
|
ddr->timing_cfg_0 = CONFIG_SYS_DDR2_TIMING_0;
|
|
ddr->timing_cfg_1 = CONFIG_SYS_DDR2_TIMING_1;
|
|
ddr->timing_cfg_2 = CONFIG_SYS_DDR2_TIMING_2;
|
|
ddr->sdram_cfg = CONFIG_SYS_DDR2_CFG_1A;
|
|
ddr->sdram_cfg_2 = CONFIG_SYS_DDR2_CFG_2;
|
|
ddr->sdram_mode = CONFIG_SYS_DDR2_MODE_1;
|
|
ddr->sdram_mode_2 = CONFIG_SYS_DDR2_MODE_2;
|
|
ddr->sdram_md_cntl = CONFIG_SYS_DDR2_MODE_CTL;
|
|
ddr->sdram_interval = CONFIG_SYS_DDR2_INTERVAL;
|
|
ddr->sdram_data_init = CONFIG_SYS_DDR2_DATA_INIT;
|
|
ddr->sdram_clk_cntl = CONFIG_SYS_DDR2_CLK_CTRL;
|
|
|
|
asm ("sync;isync");
|
|
|
|
udelay (500);
|
|
|
|
ddr->sdram_cfg = CONFIG_SYS_DDR2_CFG_1B;
|
|
asm ("sync; isync");
|
|
|
|
udelay (500);
|
|
#endif
|
|
return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
|
|
}
|
|
#endif /* !defined(CONFIG_SPD_EEPROM) */
|
|
|
|
#if defined(CONFIG_PCI)
|
|
/*
|
|
* Initialize PCI Devices, report devices found.
|
|
*/
|
|
|
|
void pci_init_board(void)
|
|
{
|
|
fsl_pcie_init_board(0);
|
|
}
|
|
#endif /* CONFIG_PCI */
|
|
|
|
|
|
#if defined(CONFIG_OF_BOARD_SETUP)
|
|
int ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
ft_cpu_setup(blob, bd);
|
|
|
|
FT_FSL_PCI_SETUP;
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
void sbc8641d_reset_board (void)
|
|
{
|
|
puts ("Resetting board....\n");
|
|
}
|
|
|
|
/*
|
|
* get_board_sys_clk
|
|
* Clock is fixed at 1GHz on this board. Used for CONFIG_SYS_CLK_FREQ
|
|
*/
|
|
|
|
unsigned long get_board_sys_clk (ulong dummy)
|
|
{
|
|
int i;
|
|
ulong val = 0;
|
|
|
|
i = 5;
|
|
i &= 0x07;
|
|
|
|
switch (i) {
|
|
case 0:
|
|
val = 33000000;
|
|
break;
|
|
case 1:
|
|
val = 40000000;
|
|
break;
|
|
case 2:
|
|
val = 50000000;
|
|
break;
|
|
case 3:
|
|
val = 66000000;
|
|
break;
|
|
case 4:
|
|
val = 83000000;
|
|
break;
|
|
case 5:
|
|
val = 100000000;
|
|
break;
|
|
case 6:
|
|
val = 134000000;
|
|
break;
|
|
case 7:
|
|
val = 166000000;
|
|
break;
|
|
}
|
|
|
|
return val;
|
|
}
|
|
|
|
void board_reset(void)
|
|
{
|
|
#ifdef CONFIG_SYS_RESET_ADDRESS
|
|
ulong addr = CONFIG_SYS_RESET_ADDRESS;
|
|
|
|
/* flush and disable I/D cache */
|
|
__asm__ __volatile__ ("mfspr 3, 1008" ::: "r3");
|
|
__asm__ __volatile__ ("ori 5, 5, 0xcc00" ::: "r5");
|
|
__asm__ __volatile__ ("ori 4, 3, 0xc00" ::: "r4");
|
|
__asm__ __volatile__ ("andc 5, 3, 5" ::: "r5");
|
|
__asm__ __volatile__ ("sync");
|
|
__asm__ __volatile__ ("mtspr 1008, 4");
|
|
__asm__ __volatile__ ("isync");
|
|
__asm__ __volatile__ ("sync");
|
|
__asm__ __volatile__ ("mtspr 1008, 5");
|
|
__asm__ __volatile__ ("isync");
|
|
__asm__ __volatile__ ("sync");
|
|
|
|
/*
|
|
* SRR0 has system reset vector, SRR1 has default MSR value
|
|
* rfi restores MSR from SRR1 and sets the PC to the SRR0 value
|
|
*/
|
|
__asm__ __volatile__ ("mtspr 26, %0" :: "r" (addr));
|
|
__asm__ __volatile__ ("li 4, (1 << 6)" ::: "r4");
|
|
__asm__ __volatile__ ("mtspr 27, 4");
|
|
__asm__ __volatile__ ("rfi");
|
|
#endif
|
|
}
|