mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-12 22:33:18 +00:00
3dd22a37aa
This patch makes the necessary changes for making use of I2S0 channel instead of I2S1 channel on smdk board. This changes are done to maintain the uniformity to use I2S0 channel. Signed-off-by: Dani Krishna Mohan <krishna.md@samsung.com>
513 lines
12 KiB
C
513 lines
12 KiB
C
/*
|
|
* Copyright (c) 2012 Samsung Electronics.
|
|
* Abhilash Kesavan <a.kesavan@samsung.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <fdtdec.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/arch/pinmux.h>
|
|
#include <asm/arch/sromc.h>
|
|
|
|
static void exynos5_uart_config(int peripheral)
|
|
{
|
|
struct exynos5_gpio_part1 *gpio1 =
|
|
(struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1();
|
|
struct s5p_gpio_bank *bank;
|
|
int i, start, count;
|
|
|
|
switch (peripheral) {
|
|
case PERIPH_ID_UART0:
|
|
bank = &gpio1->a0;
|
|
start = 0;
|
|
count = 4;
|
|
break;
|
|
case PERIPH_ID_UART1:
|
|
bank = &gpio1->d0;
|
|
start = 0;
|
|
count = 4;
|
|
break;
|
|
case PERIPH_ID_UART2:
|
|
bank = &gpio1->a1;
|
|
start = 0;
|
|
count = 4;
|
|
break;
|
|
case PERIPH_ID_UART3:
|
|
bank = &gpio1->a1;
|
|
start = 4;
|
|
count = 2;
|
|
break;
|
|
}
|
|
for (i = start; i < start + count; i++) {
|
|
s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE);
|
|
s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
|
|
}
|
|
}
|
|
|
|
static int exynos5_mmc_config(int peripheral, int flags)
|
|
{
|
|
struct exynos5_gpio_part1 *gpio1 =
|
|
(struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1();
|
|
struct s5p_gpio_bank *bank, *bank_ext;
|
|
int i, start = 0, gpio_func = 0;
|
|
|
|
switch (peripheral) {
|
|
case PERIPH_ID_SDMMC0:
|
|
bank = &gpio1->c0;
|
|
bank_ext = &gpio1->c1;
|
|
start = 0;
|
|
gpio_func = GPIO_FUNC(0x2);
|
|
break;
|
|
case PERIPH_ID_SDMMC1:
|
|
bank = &gpio1->c2;
|
|
bank_ext = NULL;
|
|
break;
|
|
case PERIPH_ID_SDMMC2:
|
|
bank = &gpio1->c3;
|
|
bank_ext = &gpio1->c4;
|
|
start = 3;
|
|
gpio_func = GPIO_FUNC(0x3);
|
|
break;
|
|
case PERIPH_ID_SDMMC3:
|
|
bank = &gpio1->c4;
|
|
bank_ext = NULL;
|
|
break;
|
|
}
|
|
if ((flags & PINMUX_FLAG_8BIT_MODE) && !bank_ext) {
|
|
debug("SDMMC device %d does not support 8bit mode",
|
|
peripheral);
|
|
return -1;
|
|
}
|
|
if (flags & PINMUX_FLAG_8BIT_MODE) {
|
|
for (i = start; i <= (start + 3); i++) {
|
|
s5p_gpio_cfg_pin(bank_ext, i, gpio_func);
|
|
s5p_gpio_set_pull(bank_ext, i, GPIO_PULL_UP);
|
|
s5p_gpio_set_drv(bank_ext, i, GPIO_DRV_4X);
|
|
}
|
|
}
|
|
for (i = 0; i < 2; i++) {
|
|
s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
|
|
s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE);
|
|
s5p_gpio_set_drv(bank, i, GPIO_DRV_4X);
|
|
}
|
|
for (i = 3; i <= 6; i++) {
|
|
s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
|
|
s5p_gpio_set_pull(bank, i, GPIO_PULL_UP);
|
|
s5p_gpio_set_drv(bank, i, GPIO_DRV_4X);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void exynos5_sromc_config(int flags)
|
|
{
|
|
struct exynos5_gpio_part1 *gpio1 =
|
|
(struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1();
|
|
int i;
|
|
|
|
/*
|
|
* SROM:CS1 and EBI
|
|
*
|
|
* GPY0[0] SROM_CSn[0]
|
|
* GPY0[1] SROM_CSn[1](2)
|
|
* GPY0[2] SROM_CSn[2]
|
|
* GPY0[3] SROM_CSn[3]
|
|
* GPY0[4] EBI_OEn(2)
|
|
* GPY0[5] EBI_EEn(2)
|
|
*
|
|
* GPY1[0] EBI_BEn[0](2)
|
|
* GPY1[1] EBI_BEn[1](2)
|
|
* GPY1[2] SROM_WAIT(2)
|
|
* GPY1[3] EBI_DATA_RDn(2)
|
|
*/
|
|
s5p_gpio_cfg_pin(&gpio1->y0, (flags & PINMUX_FLAG_BANK),
|
|
GPIO_FUNC(2));
|
|
s5p_gpio_cfg_pin(&gpio1->y0, 4, GPIO_FUNC(2));
|
|
s5p_gpio_cfg_pin(&gpio1->y0, 5, GPIO_FUNC(2));
|
|
|
|
for (i = 0; i < 4; i++)
|
|
s5p_gpio_cfg_pin(&gpio1->y1, i, GPIO_FUNC(2));
|
|
|
|
/*
|
|
* EBI: 8 Addrss Lines
|
|
*
|
|
* GPY3[0] EBI_ADDR[0](2)
|
|
* GPY3[1] EBI_ADDR[1](2)
|
|
* GPY3[2] EBI_ADDR[2](2)
|
|
* GPY3[3] EBI_ADDR[3](2)
|
|
* GPY3[4] EBI_ADDR[4](2)
|
|
* GPY3[5] EBI_ADDR[5](2)
|
|
* GPY3[6] EBI_ADDR[6](2)
|
|
* GPY3[7] EBI_ADDR[7](2)
|
|
*
|
|
* EBI: 16 Data Lines
|
|
*
|
|
* GPY5[0] EBI_DATA[0](2)
|
|
* GPY5[1] EBI_DATA[1](2)
|
|
* GPY5[2] EBI_DATA[2](2)
|
|
* GPY5[3] EBI_DATA[3](2)
|
|
* GPY5[4] EBI_DATA[4](2)
|
|
* GPY5[5] EBI_DATA[5](2)
|
|
* GPY5[6] EBI_DATA[6](2)
|
|
* GPY5[7] EBI_DATA[7](2)
|
|
*
|
|
* GPY6[0] EBI_DATA[8](2)
|
|
* GPY6[1] EBI_DATA[9](2)
|
|
* GPY6[2] EBI_DATA[10](2)
|
|
* GPY6[3] EBI_DATA[11](2)
|
|
* GPY6[4] EBI_DATA[12](2)
|
|
* GPY6[5] EBI_DATA[13](2)
|
|
* GPY6[6] EBI_DATA[14](2)
|
|
* GPY6[7] EBI_DATA[15](2)
|
|
*/
|
|
for (i = 0; i < 8; i++) {
|
|
s5p_gpio_cfg_pin(&gpio1->y3, i, GPIO_FUNC(2));
|
|
s5p_gpio_set_pull(&gpio1->y3, i, GPIO_PULL_UP);
|
|
|
|
s5p_gpio_cfg_pin(&gpio1->y5, i, GPIO_FUNC(2));
|
|
s5p_gpio_set_pull(&gpio1->y5, i, GPIO_PULL_UP);
|
|
|
|
s5p_gpio_cfg_pin(&gpio1->y6, i, GPIO_FUNC(2));
|
|
s5p_gpio_set_pull(&gpio1->y6, i, GPIO_PULL_UP);
|
|
}
|
|
}
|
|
|
|
static void exynos5_i2c_config(int peripheral, int flags)
|
|
{
|
|
|
|
struct exynos5_gpio_part1 *gpio1 =
|
|
(struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1();
|
|
|
|
switch (peripheral) {
|
|
case PERIPH_ID_I2C0:
|
|
s5p_gpio_cfg_pin(&gpio1->b3, 0, GPIO_FUNC(0x2));
|
|
s5p_gpio_cfg_pin(&gpio1->b3, 1, GPIO_FUNC(0x2));
|
|
break;
|
|
case PERIPH_ID_I2C1:
|
|
s5p_gpio_cfg_pin(&gpio1->b3, 2, GPIO_FUNC(0x2));
|
|
s5p_gpio_cfg_pin(&gpio1->b3, 3, GPIO_FUNC(0x2));
|
|
break;
|
|
case PERIPH_ID_I2C2:
|
|
s5p_gpio_cfg_pin(&gpio1->a0, 6, GPIO_FUNC(0x3));
|
|
s5p_gpio_cfg_pin(&gpio1->a0, 7, GPIO_FUNC(0x3));
|
|
break;
|
|
case PERIPH_ID_I2C3:
|
|
s5p_gpio_cfg_pin(&gpio1->a1, 2, GPIO_FUNC(0x3));
|
|
s5p_gpio_cfg_pin(&gpio1->a1, 3, GPIO_FUNC(0x3));
|
|
break;
|
|
case PERIPH_ID_I2C4:
|
|
s5p_gpio_cfg_pin(&gpio1->a2, 0, GPIO_FUNC(0x3));
|
|
s5p_gpio_cfg_pin(&gpio1->a2, 1, GPIO_FUNC(0x3));
|
|
break;
|
|
case PERIPH_ID_I2C5:
|
|
s5p_gpio_cfg_pin(&gpio1->a2, 2, GPIO_FUNC(0x3));
|
|
s5p_gpio_cfg_pin(&gpio1->a2, 3, GPIO_FUNC(0x3));
|
|
break;
|
|
case PERIPH_ID_I2C6:
|
|
s5p_gpio_cfg_pin(&gpio1->b1, 3, GPIO_FUNC(0x4));
|
|
s5p_gpio_cfg_pin(&gpio1->b1, 4, GPIO_FUNC(0x4));
|
|
break;
|
|
case PERIPH_ID_I2C7:
|
|
s5p_gpio_cfg_pin(&gpio1->b2, 2, GPIO_FUNC(0x3));
|
|
s5p_gpio_cfg_pin(&gpio1->b2, 3, GPIO_FUNC(0x3));
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void exynos5_i2s_config(int peripheral)
|
|
{
|
|
int i;
|
|
struct exynos5_gpio_part1 *gpio1 =
|
|
(struct exynos5_gpio_part1 *)samsung_get_base_gpio_part1();
|
|
struct exynos5_gpio_part4 *gpio4 =
|
|
(struct exynos5_gpio_part4 *)samsung_get_base_gpio_part4();
|
|
|
|
switch (peripheral) {
|
|
case PERIPH_ID_I2S0:
|
|
for (i = 0; i < 5; i++)
|
|
s5p_gpio_cfg_pin(&gpio4->z, i, GPIO_FUNC(0x02));
|
|
break;
|
|
case PERIPH_ID_I2S1:
|
|
for (i = 0; i < 5; i++)
|
|
s5p_gpio_cfg_pin(&gpio1->b0, i, GPIO_FUNC(0x02));
|
|
break;
|
|
}
|
|
}
|
|
|
|
void exynos5_spi_config(int peripheral)
|
|
{
|
|
int cfg = 0, pin = 0, i;
|
|
struct s5p_gpio_bank *bank = NULL;
|
|
struct exynos5_gpio_part1 *gpio1 =
|
|
(struct exynos5_gpio_part1 *) samsung_get_base_gpio_part1();
|
|
struct exynos5_gpio_part2 *gpio2 =
|
|
(struct exynos5_gpio_part2 *) samsung_get_base_gpio_part2();
|
|
|
|
switch (peripheral) {
|
|
case PERIPH_ID_SPI0:
|
|
bank = &gpio1->a2;
|
|
cfg = GPIO_FUNC(0x2);
|
|
pin = 0;
|
|
break;
|
|
case PERIPH_ID_SPI1:
|
|
bank = &gpio1->a2;
|
|
cfg = GPIO_FUNC(0x2);
|
|
pin = 4;
|
|
break;
|
|
case PERIPH_ID_SPI2:
|
|
bank = &gpio1->b1;
|
|
cfg = GPIO_FUNC(0x5);
|
|
pin = 1;
|
|
break;
|
|
case PERIPH_ID_SPI3:
|
|
bank = &gpio2->f1;
|
|
cfg = GPIO_FUNC(0x2);
|
|
pin = 0;
|
|
break;
|
|
case PERIPH_ID_SPI4:
|
|
for (i = 0; i < 2; i++) {
|
|
s5p_gpio_cfg_pin(&gpio2->f0, i + 2, GPIO_FUNC(0x4));
|
|
s5p_gpio_cfg_pin(&gpio2->e0, i + 4, GPIO_FUNC(0x4));
|
|
}
|
|
break;
|
|
}
|
|
if (peripheral != PERIPH_ID_SPI4) {
|
|
for (i = pin; i < pin + 4; i++)
|
|
s5p_gpio_cfg_pin(bank, i, cfg);
|
|
}
|
|
}
|
|
|
|
static int exynos5_pinmux_config(int peripheral, int flags)
|
|
{
|
|
switch (peripheral) {
|
|
case PERIPH_ID_UART0:
|
|
case PERIPH_ID_UART1:
|
|
case PERIPH_ID_UART2:
|
|
case PERIPH_ID_UART3:
|
|
exynos5_uart_config(peripheral);
|
|
break;
|
|
case PERIPH_ID_SDMMC0:
|
|
case PERIPH_ID_SDMMC1:
|
|
case PERIPH_ID_SDMMC2:
|
|
case PERIPH_ID_SDMMC3:
|
|
return exynos5_mmc_config(peripheral, flags);
|
|
case PERIPH_ID_SROMC:
|
|
exynos5_sromc_config(flags);
|
|
break;
|
|
case PERIPH_ID_I2C0:
|
|
case PERIPH_ID_I2C1:
|
|
case PERIPH_ID_I2C2:
|
|
case PERIPH_ID_I2C3:
|
|
case PERIPH_ID_I2C4:
|
|
case PERIPH_ID_I2C5:
|
|
case PERIPH_ID_I2C6:
|
|
case PERIPH_ID_I2C7:
|
|
exynos5_i2c_config(peripheral, flags);
|
|
break;
|
|
case PERIPH_ID_I2S0:
|
|
case PERIPH_ID_I2S1:
|
|
exynos5_i2s_config(peripheral);
|
|
break;
|
|
case PERIPH_ID_SPI0:
|
|
case PERIPH_ID_SPI1:
|
|
case PERIPH_ID_SPI2:
|
|
case PERIPH_ID_SPI3:
|
|
case PERIPH_ID_SPI4:
|
|
exynos5_spi_config(peripheral);
|
|
break;
|
|
default:
|
|
debug("%s: invalid peripheral %d", __func__, peripheral);
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void exynos4_i2c_config(int peripheral, int flags)
|
|
{
|
|
struct exynos4_gpio_part1 *gpio1 =
|
|
(struct exynos4_gpio_part1 *) samsung_get_base_gpio_part1();
|
|
|
|
switch (peripheral) {
|
|
case PERIPH_ID_I2C0:
|
|
s5p_gpio_cfg_pin(&gpio1->d1, 0, GPIO_FUNC(0x2));
|
|
s5p_gpio_cfg_pin(&gpio1->d1, 1, GPIO_FUNC(0x2));
|
|
break;
|
|
case PERIPH_ID_I2C1:
|
|
s5p_gpio_cfg_pin(&gpio1->d1, 2, GPIO_FUNC(0x2));
|
|
s5p_gpio_cfg_pin(&gpio1->d1, 3, GPIO_FUNC(0x2));
|
|
break;
|
|
case PERIPH_ID_I2C2:
|
|
s5p_gpio_cfg_pin(&gpio1->a0, 6, GPIO_FUNC(0x3));
|
|
s5p_gpio_cfg_pin(&gpio1->a0, 7, GPIO_FUNC(0x3));
|
|
break;
|
|
case PERIPH_ID_I2C3:
|
|
s5p_gpio_cfg_pin(&gpio1->a1, 2, GPIO_FUNC(0x3));
|
|
s5p_gpio_cfg_pin(&gpio1->a1, 3, GPIO_FUNC(0x3));
|
|
break;
|
|
case PERIPH_ID_I2C4:
|
|
s5p_gpio_cfg_pin(&gpio1->b, 2, GPIO_FUNC(0x3));
|
|
s5p_gpio_cfg_pin(&gpio1->b, 3, GPIO_FUNC(0x3));
|
|
break;
|
|
case PERIPH_ID_I2C5:
|
|
s5p_gpio_cfg_pin(&gpio1->b, 6, GPIO_FUNC(0x3));
|
|
s5p_gpio_cfg_pin(&gpio1->b, 7, GPIO_FUNC(0x3));
|
|
break;
|
|
case PERIPH_ID_I2C6:
|
|
s5p_gpio_cfg_pin(&gpio1->c1, 3, GPIO_FUNC(0x4));
|
|
s5p_gpio_cfg_pin(&gpio1->c1, 4, GPIO_FUNC(0x4));
|
|
break;
|
|
case PERIPH_ID_I2C7:
|
|
s5p_gpio_cfg_pin(&gpio1->d0, 2, GPIO_FUNC(0x3));
|
|
s5p_gpio_cfg_pin(&gpio1->d0, 3, GPIO_FUNC(0x3));
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int exynos4_mmc_config(int peripheral, int flags)
|
|
{
|
|
struct exynos4_gpio_part2 *gpio2 =
|
|
(struct exynos4_gpio_part2 *)samsung_get_base_gpio_part2();
|
|
struct s5p_gpio_bank *bank, *bank_ext;
|
|
int i;
|
|
|
|
switch (peripheral) {
|
|
case PERIPH_ID_SDMMC0:
|
|
bank = &gpio2->k0;
|
|
bank_ext = &gpio2->k1;
|
|
break;
|
|
case PERIPH_ID_SDMMC2:
|
|
bank = &gpio2->k2;
|
|
bank_ext = &gpio2->k3;
|
|
break;
|
|
default:
|
|
return -1;
|
|
}
|
|
for (i = 0; i < 7; i++) {
|
|
if (i == 2)
|
|
continue;
|
|
s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
|
|
s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE);
|
|
s5p_gpio_set_drv(bank, i, GPIO_DRV_4X);
|
|
}
|
|
if (flags & PINMUX_FLAG_8BIT_MODE) {
|
|
for (i = 3; i < 7; i++) {
|
|
s5p_gpio_cfg_pin(bank_ext, i, GPIO_FUNC(0x3));
|
|
s5p_gpio_set_pull(bank_ext, i, GPIO_PULL_NONE);
|
|
s5p_gpio_set_drv(bank_ext, i, GPIO_DRV_4X);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void exynos4_uart_config(int peripheral)
|
|
{
|
|
struct exynos4_gpio_part1 *gpio1 =
|
|
(struct exynos4_gpio_part1 *)samsung_get_base_gpio_part1();
|
|
struct s5p_gpio_bank *bank;
|
|
int i, start, count;
|
|
|
|
switch (peripheral) {
|
|
case PERIPH_ID_UART0:
|
|
bank = &gpio1->a0;
|
|
start = 0;
|
|
count = 4;
|
|
break;
|
|
case PERIPH_ID_UART1:
|
|
bank = &gpio1->a0;
|
|
start = 4;
|
|
count = 4;
|
|
break;
|
|
case PERIPH_ID_UART2:
|
|
bank = &gpio1->a1;
|
|
start = 0;
|
|
count = 4;
|
|
break;
|
|
case PERIPH_ID_UART3:
|
|
bank = &gpio1->a1;
|
|
start = 4;
|
|
count = 2;
|
|
break;
|
|
}
|
|
for (i = start; i < start + count; i++) {
|
|
s5p_gpio_set_pull(bank, i, GPIO_PULL_NONE);
|
|
s5p_gpio_cfg_pin(bank, i, GPIO_FUNC(0x2));
|
|
}
|
|
}
|
|
static int exynos4_pinmux_config(int peripheral, int flags)
|
|
{
|
|
switch (peripheral) {
|
|
case PERIPH_ID_UART0:
|
|
case PERIPH_ID_UART1:
|
|
case PERIPH_ID_UART2:
|
|
case PERIPH_ID_UART3:
|
|
exynos4_uart_config(peripheral);
|
|
break;
|
|
case PERIPH_ID_I2C0:
|
|
case PERIPH_ID_I2C1:
|
|
case PERIPH_ID_I2C2:
|
|
case PERIPH_ID_I2C3:
|
|
case PERIPH_ID_I2C4:
|
|
case PERIPH_ID_I2C5:
|
|
case PERIPH_ID_I2C6:
|
|
case PERIPH_ID_I2C7:
|
|
exynos4_i2c_config(peripheral, flags);
|
|
break;
|
|
case PERIPH_ID_SDMMC0:
|
|
case PERIPH_ID_SDMMC2:
|
|
return exynos4_mmc_config(peripheral, flags);
|
|
case PERIPH_ID_SDMMC1:
|
|
case PERIPH_ID_SDMMC3:
|
|
case PERIPH_ID_SDMMC4:
|
|
printf("SDMMC device %d not implemented\n", peripheral);
|
|
return -1;
|
|
default:
|
|
debug("%s: invalid peripheral %d", __func__, peripheral);
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int exynos_pinmux_config(int peripheral, int flags)
|
|
{
|
|
if (cpu_is_exynos5()) {
|
|
return exynos5_pinmux_config(peripheral, flags);
|
|
} else if (cpu_is_exynos4()) {
|
|
return exynos4_pinmux_config(peripheral, flags);
|
|
} else {
|
|
debug("pinmux functionality not supported\n");
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_OF_CONTROL
|
|
static int exynos5_pinmux_decode_periph_id(const void *blob, int node)
|
|
{
|
|
int err;
|
|
u32 cell[3];
|
|
|
|
err = fdtdec_get_int_array(blob, node, "interrupts", cell,
|
|
ARRAY_SIZE(cell));
|
|
if (err)
|
|
return PERIPH_ID_NONE;
|
|
|
|
/* check for invalid peripheral id */
|
|
if ((PERIPH_ID_SDMMC4 > cell[1]) || (cell[1] < PERIPH_ID_UART0))
|
|
return cell[1];
|
|
|
|
debug(" invalid peripheral id\n");
|
|
return PERIPH_ID_NONE;
|
|
}
|
|
|
|
int pinmux_decode_periph_id(const void *blob, int node)
|
|
{
|
|
if (cpu_is_exynos5())
|
|
return exynos5_pinmux_decode_periph_id(blob, node);
|
|
else
|
|
return PERIPH_ID_NONE;
|
|
}
|
|
#endif
|