mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-04 18:41:03 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
257 lines
6.4 KiB
C
257 lines
6.4 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2008-2013 Eric Jarrige <eric.jarrige@armadeus.org>
|
|
*
|
|
* based on the files by
|
|
* Sascha Hauer, Pengutronix
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <environment.h>
|
|
#include <jffs2/jffs2.h>
|
|
#include <nand.h>
|
|
#include <netdev.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/arch/gpio.h>
|
|
#include <asm/gpio.h>
|
|
#include <linux/errno.h>
|
|
#include "apf27.h"
|
|
#include "crc.h"
|
|
#include "fpga.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
/*
|
|
* Fuse bank 1 row 8 is "reserved for future use" and therefore available for
|
|
* customer use. The APF27 board uses this fuse to store the board revision:
|
|
* 0: initial board revision
|
|
* 1: first revision - Presence of the second RAM chip on the board is blown in
|
|
* fuse bank 1 row 9 bit 0 - No hardware change
|
|
* N: to be defined
|
|
*/
|
|
static u32 get_board_rev(void)
|
|
{
|
|
struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE;
|
|
|
|
return readl(&iim->bank[1].fuse_regs[8]);
|
|
}
|
|
|
|
/*
|
|
* Fuse bank 1 row 9 is "reserved for future use" and therefore available for
|
|
* customer use. The APF27 board revision 1 uses the bit 0 to permanently store
|
|
* the presence of the second RAM chip
|
|
* 0: AFP27 with 1 RAM of 64 MiB
|
|
* 1: AFP27 with 2 RAM chips of 64 MiB each (128MB)
|
|
*/
|
|
static int get_num_ram_bank(void)
|
|
{
|
|
struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE;
|
|
int nr_dram_banks = 1;
|
|
|
|
if ((get_board_rev() > 0) && (CONFIG_NR_DRAM_BANKS > 1))
|
|
nr_dram_banks += readl(&iim->bank[1].fuse_regs[9]) & 0x01;
|
|
else
|
|
nr_dram_banks = CONFIG_NR_DRAM_POPULATED;
|
|
|
|
return nr_dram_banks;
|
|
}
|
|
|
|
static void apf27_port_init(int port, u32 gpio_dr, u32 ocr1, u32 ocr2,
|
|
u32 iconfa1, u32 iconfa2, u32 iconfb1, u32 iconfb2,
|
|
u32 icr1, u32 icr2, u32 imr, u32 gpio_dir, u32 gpr,
|
|
u32 puen, u32 gius)
|
|
{
|
|
struct gpio_port_regs *regs = (struct gpio_port_regs *)IMX_GPIO_BASE;
|
|
|
|
writel(gpio_dr, ®s->port[port].gpio_dr);
|
|
writel(ocr1, ®s->port[port].ocr1);
|
|
writel(ocr2, ®s->port[port].ocr2);
|
|
writel(iconfa1, ®s->port[port].iconfa1);
|
|
writel(iconfa2, ®s->port[port].iconfa2);
|
|
writel(iconfb1, ®s->port[port].iconfb1);
|
|
writel(iconfb2, ®s->port[port].iconfb2);
|
|
writel(icr1, ®s->port[port].icr1);
|
|
writel(icr2, ®s->port[port].icr2);
|
|
writel(imr, ®s->port[port].imr);
|
|
writel(gpio_dir, ®s->port[port].gpio_dir);
|
|
writel(gpr, ®s->port[port].gpr);
|
|
writel(puen, ®s->port[port].puen);
|
|
writel(gius, ®s->port[port].gius);
|
|
}
|
|
|
|
#define APF27_PORT_INIT(n) apf27_port_init(PORT##n, ACFG_DR_##n##_VAL, \
|
|
ACFG_OCR1_##n##_VAL, ACFG_OCR2_##n##_VAL, ACFG_ICFA1_##n##_VAL, \
|
|
ACFG_ICFA2_##n##_VAL, ACFG_ICFB1_##n##_VAL, ACFG_ICFB2_##n##_VAL, \
|
|
ACFG_ICR1_##n##_VAL, ACFG_ICR2_##n##_VAL, ACFG_IMR_##n##_VAL, \
|
|
ACFG_DDIR_##n##_VAL, ACFG_GPR_##n##_VAL, ACFG_PUEN_##n##_VAL, \
|
|
ACFG_GIUS_##n##_VAL)
|
|
|
|
static void apf27_iomux_init(void)
|
|
{
|
|
APF27_PORT_INIT(A);
|
|
APF27_PORT_INIT(B);
|
|
APF27_PORT_INIT(C);
|
|
APF27_PORT_INIT(D);
|
|
APF27_PORT_INIT(E);
|
|
APF27_PORT_INIT(F);
|
|
}
|
|
|
|
static int apf27_devices_init(void)
|
|
{
|
|
int i;
|
|
unsigned int mode[] = {
|
|
PC5_PF_I2C2_DATA,
|
|
PC6_PF_I2C2_CLK,
|
|
PD17_PF_I2C_DATA,
|
|
PD18_PF_I2C_CLK,
|
|
};
|
|
|
|
for (i = 0; i < ARRAY_SIZE(mode); i++)
|
|
imx_gpio_mode(mode[i]);
|
|
|
|
#ifdef CONFIG_MXC_UART
|
|
mx27_uart1_init_pins();
|
|
#endif
|
|
|
|
#ifdef CONFIG_FEC_MXC
|
|
mx27_fec_init_pins();
|
|
#endif
|
|
|
|
#ifdef CONFIG_MMC_MXC
|
|
mx27_sd2_init_pins();
|
|
imx_gpio_mode((GPIO_PORTF | GPIO_OUT | GPIO_PUEN | GPIO_GPIO | 16));
|
|
gpio_request(PC_PWRON, "pc_pwron");
|
|
gpio_set_value(PC_PWRON, 1);
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
static void apf27_setup_csx(void)
|
|
{
|
|
struct weim_regs *weim = (struct weim_regs *)IMX_WEIM_BASE;
|
|
|
|
writel(ACFG_CS0U_VAL, &weim->cs0u);
|
|
writel(ACFG_CS0L_VAL, &weim->cs0l);
|
|
writel(ACFG_CS0A_VAL, &weim->cs0a);
|
|
|
|
writel(ACFG_CS1U_VAL, &weim->cs1u);
|
|
writel(ACFG_CS1L_VAL, &weim->cs1l);
|
|
writel(ACFG_CS1A_VAL, &weim->cs1a);
|
|
|
|
writel(ACFG_CS2U_VAL, &weim->cs2u);
|
|
writel(ACFG_CS2L_VAL, &weim->cs2l);
|
|
writel(ACFG_CS2A_VAL, &weim->cs2a);
|
|
|
|
writel(ACFG_CS3U_VAL, &weim->cs3u);
|
|
writel(ACFG_CS3L_VAL, &weim->cs3l);
|
|
writel(ACFG_CS3A_VAL, &weim->cs3a);
|
|
|
|
writel(ACFG_CS4U_VAL, &weim->cs4u);
|
|
writel(ACFG_CS4L_VAL, &weim->cs4l);
|
|
writel(ACFG_CS4A_VAL, &weim->cs4a);
|
|
|
|
writel(ACFG_CS5U_VAL, &weim->cs5u);
|
|
writel(ACFG_CS5L_VAL, &weim->cs5l);
|
|
writel(ACFG_CS5A_VAL, &weim->cs5a);
|
|
|
|
writel(ACFG_EIM_VAL, &weim->eim);
|
|
}
|
|
|
|
static void apf27_setup_port(void)
|
|
{
|
|
struct system_control_regs *system =
|
|
(struct system_control_regs *)IMX_SYSTEM_CTL_BASE;
|
|
|
|
writel(ACFG_FMCR_VAL, &system->fmcr);
|
|
}
|
|
|
|
int board_init(void)
|
|
{
|
|
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
|
|
|
|
apf27_setup_csx();
|
|
apf27_setup_port();
|
|
apf27_iomux_init();
|
|
apf27_devices_init();
|
|
#if defined(CONFIG_FPGA)
|
|
APF27_init_fpga();
|
|
#endif
|
|
|
|
|
|
return 0;
|
|
}
|
|
|
|
int dram_init(void)
|
|
{
|
|
gd->ram_size = get_ram_size((void *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
|
|
if (get_num_ram_bank() > 1)
|
|
gd->ram_size += get_ram_size((void *)PHYS_SDRAM_2,
|
|
PHYS_SDRAM_2_SIZE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int dram_init_banksize(void)
|
|
{
|
|
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
|
|
gd->bd->bi_dram[0].size = get_ram_size((void *)PHYS_SDRAM_1,
|
|
PHYS_SDRAM_1_SIZE);
|
|
gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
|
|
if (get_num_ram_bank() > 1)
|
|
gd->bd->bi_dram[1].size = get_ram_size((void *)PHYS_SDRAM_2,
|
|
PHYS_SDRAM_2_SIZE);
|
|
else
|
|
gd->bd->bi_dram[1].size = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
ulong board_get_usable_ram_top(ulong total_size)
|
|
{
|
|
ulong ramtop;
|
|
|
|
if (get_num_ram_bank() > 1)
|
|
ramtop = PHYS_SDRAM_2 + get_ram_size((void *)PHYS_SDRAM_2,
|
|
PHYS_SDRAM_2_SIZE);
|
|
else
|
|
ramtop = PHYS_SDRAM_1 + get_ram_size((void *)PHYS_SDRAM_1,
|
|
PHYS_SDRAM_1_SIZE);
|
|
|
|
return ramtop;
|
|
}
|
|
|
|
int checkboard(void)
|
|
{
|
|
printf("Board: Armadeus APF27 revision %d\n", get_board_rev());
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
inline void hang(void)
|
|
{
|
|
for (;;)
|
|
;
|
|
}
|
|
|
|
void board_init_f(ulong bootflag)
|
|
{
|
|
/*
|
|
* copy ourselves from where we are running to where we were
|
|
* linked at. Use ulong pointers as all addresses involved
|
|
* are 4-byte-aligned.
|
|
*/
|
|
ulong *start_ptr, *end_ptr, *link_ptr, *run_ptr, *dst;
|
|
asm volatile ("ldr %0, =_start" : "=r"(start_ptr));
|
|
asm volatile ("ldr %0, =_end" : "=r"(end_ptr));
|
|
asm volatile ("ldr %0, =board_init_f" : "=r"(link_ptr));
|
|
asm volatile ("adr %0, board_init_f" : "=r"(run_ptr));
|
|
for (dst = start_ptr; dst < end_ptr; dst++)
|
|
*dst = *(dst+(run_ptr-link_ptr));
|
|
|
|
/*
|
|
* branch to nand_boot's link-time address.
|
|
*/
|
|
asm volatile("ldr pc, =nand_boot");
|
|
}
|
|
#endif /* CONFIG_SPL_BUILD */
|