mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-26 22:52:18 +00:00
25ddd1fb0a
CONFIG_SYS_GBL_DATA_SIZE has always been just a bad workarond for not being able to use "sizeof(struct global_data)" in assembler files. Recent experience has shown that manual synchronization is not reliable enough. This patch renames CONFIG_SYS_GBL_DATA_SIZE into GENERATED_GBL_DATA_SIZE which gets automatically generated by the asm-offsets tool. In the result, all definitions of this value can be deleted from the board config files. We have to make sure that all files that reference such data include the new <asm-offsets.h> file. No other changes have been done yet, but it is obvious that similar changes / simplifications can be done for other, related macro definitions as well. Signed-off-by: Wolfgang Denk <wd@denx.de> Acked-by: Kumar Gala <galak@kernel.crashing.org>
419 lines
14 KiB
C
419 lines
14 KiB
C
/*
|
|
* (C) Copyright 2002-2005
|
|
* Gary Jennejohn <garyj@denx.de>
|
|
*
|
|
* Configuation settings for the TRAB board.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/*
|
|
* Default configuration is with 8 MB Flash, 32 MB RAM
|
|
*/
|
|
#if (!defined(CONFIG_FLASH_8MB)) && (!defined(CONFIG_FLASH_16MB))
|
|
# define CONFIG_FLASH_8MB /* 8 MB Flash */
|
|
#endif
|
|
#if (!defined(CONFIG_RAM_16MB)) && (!defined(CONFIG_RAM_32MB))
|
|
# define CONFIG_RAM_32MB /* 32 MB SDRAM */
|
|
#endif
|
|
|
|
/*
|
|
* High Level Configuration Options
|
|
* (easy to change)
|
|
*/
|
|
#define CONFIG_ARM920T 1 /* This is an arm920t CPU */
|
|
#define CONFIG_S3C24X0 1 /* in a SAMSUNG S3C24x0-type SoC */
|
|
#define CONFIG_S3C2400 1 /* specifically a SAMSUNG S3C2400 SoC */
|
|
#define CONFIG_TRAB 1 /* on a TRAB Board */
|
|
#undef CONFIG_TRAB_50MHZ /* run the CPU at 50 MHz */
|
|
|
|
/* automatic software updates (see board/trab/auto_update.c) */
|
|
#define CONFIG_AUTO_UPDATE 1
|
|
|
|
/* input clock of PLL */
|
|
#define CONFIG_SYS_CLK_FREQ 12000000 /* TRAB has 12 MHz input clock */
|
|
|
|
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
|
|
|
|
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
|
|
#define CONFIG_SETUP_MEMORY_TAGS 1
|
|
#define CONFIG_INITRD_TAG 1
|
|
|
|
#define CONFIG_SYS_DEVICE_NULLDEV 1 /* enble null device */
|
|
#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */
|
|
|
|
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
|
|
|
|
/***********************************************************
|
|
* I2C stuff:
|
|
* the TRAB is equipped with an ATMEL 24C04 EEPROM at
|
|
* address 0x54 with 8bit addressing
|
|
***********************************************************/
|
|
#define CONFIG_HARD_I2C /* I2C with hardware support */
|
|
#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed */
|
|
#define CONFIG_SYS_I2C_SLAVE 0x7F /* I2C slave addr */
|
|
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x54 /* EEPROM address */
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* 1 address byte */
|
|
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW 0x01
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 /* 8 bytes page write mode on 24C04 */
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10
|
|
|
|
/* USB stuff */
|
|
#define CONFIG_USB_OHCI_NEW 1
|
|
#define CONFIG_USB_STORAGE 1
|
|
#define CONFIG_DOS_PARTITION 1
|
|
|
|
#undef CONFIG_SYS_USB_OHCI_BOARD_INIT
|
|
#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
|
|
|
|
#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x14200000
|
|
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "s3c2400"
|
|
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15
|
|
|
|
/*
|
|
* Size of malloc() pool
|
|
*/
|
|
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
|
|
|
|
/*
|
|
* Hardware drivers
|
|
*/
|
|
#define CONFIG_NET_MULTI
|
|
#define CONFIG_CS8900 /* we have a CS8900 on-board */
|
|
#define CONFIG_CS8900_BASE 0x07000300 /* agrees with WIN CE PA */
|
|
#define CONFIG_CS8900_BUS16 /* the Linux driver does accesses as shorts */
|
|
|
|
#define CONFIG_DRIVER_S3C24X0_I2C 1 /* we use the buildin I2C controller */
|
|
|
|
#define CONFIG_VFD 1 /* VFD linear frame buffer driver */
|
|
#define VFD_TEST_LOGO 1 /* output a test logo to the VFDs */
|
|
|
|
/*
|
|
* select serial console configuration
|
|
*/
|
|
#define CONFIG_S3C24X0_SERIAL
|
|
#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on TRAB */
|
|
|
|
#define CONFIG_HWFLOW /* include RTS/CTS flow control support */
|
|
|
|
#define CONFIG_MODEM_SUPPORT 1 /* enable modem initialization stuff */
|
|
|
|
#define CONFIG_MODEM_KEY_MAGIC "23" /* hold down these keys to enable modem */
|
|
|
|
/*
|
|
* The following enables modem debugging stuff. The dbg() and
|
|
* 'char screen[1024]' are used for debug printfs. Unfortunately,
|
|
* it is usable only from BDI
|
|
*/
|
|
#undef CONFIG_MODEM_SUPPORT_DEBUG
|
|
|
|
/* allow to overwrite serial and ethaddr */
|
|
#define CONFIG_ENV_OVERWRITE
|
|
|
|
#define CONFIG_BAUDRATE 115200
|
|
|
|
#define CONFIG_TIMESTAMP 1 /* Print timestamp info for images */
|
|
|
|
/* Use s3c2400's RTC */
|
|
#define CONFIG_RTC_S3C24X0 1
|
|
|
|
|
|
/*
|
|
* BOOTP options
|
|
*/
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
#define CONFIG_BOOTP_BOOTPATH
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
#define CONFIG_BOOTP_HOSTNAME
|
|
|
|
|
|
/*
|
|
* Command line configuration.
|
|
*/
|
|
#include <config_cmd_default.h>
|
|
|
|
#define CONFIG_CMD_BSP
|
|
#define CONFIG_CMD_DATE
|
|
#define CONFIG_CMD_DHCP
|
|
#define CONFIG_CMD_FAT
|
|
#define CONFIG_CMD_NFS
|
|
#define CONFIG_CMD_SNTP
|
|
#define CONFIG_CMD_USB
|
|
|
|
#ifdef CONFIG_HWFLOW
|
|
#define CONFIG_CMD_HWFLOW
|
|
#endif
|
|
|
|
#ifdef CONFIG_VFD
|
|
#define CONFIG_CMD_VFD
|
|
#endif
|
|
|
|
#ifdef CONFIG_DRIVER_S3C24X0_I2C
|
|
#define CONFIG_CMD_EEPROM
|
|
#define CONFIG_CMD_I2C
|
|
#endif
|
|
|
|
#ifndef USE_920T_MMU
|
|
#undef CONFIG_CMD_CACHE
|
|
#endif
|
|
|
|
|
|
/* moved up */
|
|
#define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser */
|
|
|
|
#define CONFIG_BOOTDELAY 5
|
|
#define CONFIG_ZERO_BOOTDELAY_CHECK /* allow to break in always */
|
|
#define CONFIG_PREBOOT "echo;echo *** booting ***;echo"
|
|
#define CONFIG_BOOTARGS "console=ttyS0"
|
|
#define CONFIG_NETMASK 255.255.0.0
|
|
#define CONFIG_IPADDR 192.168.3.68
|
|
#define CONFIG_HOSTNAME trab
|
|
#define CONFIG_SERVERIP 192.168.3.1
|
|
#define CONFIG_BOOTCOMMAND "burn_in"
|
|
|
|
#ifndef CONFIG_FLASH_8MB /* current config: 16 MB flash */
|
|
#ifdef CONFIG_SYS_HUSH_PARSER
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"nfs_args=setenv bootargs root=/dev/nfs rw " \
|
|
"nfsroot=$serverip:$rootpath\0" \
|
|
"rootpath=/opt/eldk/arm_920TDI\0" \
|
|
"ram_args=setenv bootargs root=/dev/ram rw\0" \
|
|
"add_net=setenv bootargs $bootargs ethaddr=$ethaddr " \
|
|
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off\0" \
|
|
"add_misc=setenv bootargs $bootargs console=ttyS0 panic=1\0" \
|
|
"u-boot=/tftpboot/TRAB/u-boot.bin\0" \
|
|
"load=tftp C100000 ${u-boot}\0" \
|
|
"update=protect off 0 5FFFF;era 0 5FFFF;" \
|
|
"cp.b C100000 0 $filesize\0" \
|
|
"loadfile=/tftpboot/TRAB/uImage\0" \
|
|
"loadaddr=c400000\0" \
|
|
"net_load=tftpboot $loadaddr $loadfile\0" \
|
|
"net_nfs=run net_load nfs_args add_net add_misc;bootm\0" \
|
|
"kernel_addr=00060000\0" \
|
|
"flash_nfs=run nfs_args add_net add_misc;bootm $kernel_addr\0" \
|
|
"mdm_init1=ATZ\0" \
|
|
"mdm_init2=ATS0=1\0" \
|
|
"mdm_flow_control=rts/cts\0"
|
|
#else /* !CONFIG_SYS_HUSH_PARSER */
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"nfs_args=setenv bootargs root=/dev/nfs rw " \
|
|
"nfsroot=${serverip}:${rootpath}\0" \
|
|
"rootpath=/opt/eldk/arm_920TDI\0" \
|
|
"ram_args=setenv bootargs root=/dev/ram rw\0" \
|
|
"add_net=setenv bootargs ${bootargs} ethaddr=${ethaddr} " \
|
|
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off\0" \
|
|
"add_misc=setenv bootargs ${bootargs} console=ttyS0 panic=1\0" \
|
|
"u-boot=/tftpboot/TRAB/u-boot.bin\0" \
|
|
"load=tftp C100000 ${u-boot}\0" \
|
|
"update=protect off 0 5FFFF;era 0 5FFFF;" \
|
|
"cp.b C100000 0 ${filesize}\0" \
|
|
"loadfile=/tftpboot/TRAB/uImage\0" \
|
|
"loadaddr=c400000\0" \
|
|
"net_load=tftpboot ${loadaddr} ${loadfile}\0" \
|
|
"net_nfs=run net_load nfs_args add_net add_misc;bootm\0" \
|
|
"kernel_addr=000C0000\0" \
|
|
"flash_nfs=run nfs_args add_net add_misc;bootm ${kernel_addr}\0" \
|
|
"mdm_init1=ATZ\0" \
|
|
"mdm_init2=ATS0=1\0" \
|
|
"mdm_flow_control=rts/cts\0"
|
|
#endif /* CONFIG_SYS_HUSH_PARSER */
|
|
#else /* CONFIG_FLASH_8MB => 8 MB flash */
|
|
#ifdef CONFIG_SYS_HUSH_PARSER
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"nfs_args=setenv bootargs root=/dev/nfs rw " \
|
|
"nfsroot=$serverip:$rootpath\0" \
|
|
"rootpath=/opt/eldk/arm_920TDI\0" \
|
|
"ram_args=setenv bootargs root=/dev/ram rw\0" \
|
|
"add_net=setenv bootargs $bootargs ethaddr=$ethaddr " \
|
|
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off\0" \
|
|
"add_misc=setenv bootargs $bootargs console=ttyS0 panic=1\0" \
|
|
"u-boot=/tftpboot/TRAB/u-boot.bin\0" \
|
|
"load=tftp C100000 ${u-boot}\0" \
|
|
"update=protect off 0 3FFFF;era 0 3FFFF;" \
|
|
"cp.b C100000 0 $filesize;" \
|
|
"setenv filesize;saveenv\0" \
|
|
"loadfile=/tftpboot/TRAB/uImage\0" \
|
|
"loadaddr=C400000\0" \
|
|
"net_load=tftpboot $loadaddr $loadfile\0" \
|
|
"net_nfs=run net_load nfs_args add_net add_misc;bootm\0" \
|
|
"kernel_addr=000C0000\0" \
|
|
"flash_nfs=run nfs_args add_net add_misc;bootm $kernel_addr\0" \
|
|
"mdm_init1=ATZ\0" \
|
|
"mdm_init2=ATS0=1\0" \
|
|
"mdm_flow_control=rts/cts\0"
|
|
#else /* !CONFIG_SYS_HUSH_PARSER */
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"nfs_args=setenv bootargs root=/dev/nfs rw " \
|
|
"nfsroot=${serverip}:${rootpath}\0" \
|
|
"rootpath=/opt/eldk/arm_920TDI\0" \
|
|
"ram_args=setenv bootargs root=/dev/ram rw\0" \
|
|
"add_net=setenv bootargs ${bootargs} ethaddr=${ethaddr} " \
|
|
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off\0" \
|
|
"add_misc=setenv bootargs ${bootargs} console=ttyS0 panic=1\0" \
|
|
"u-boot=/tftpboot/TRAB/u-boot.bin\0" \
|
|
"load=tftp C100000 ${u-boot}\0" \
|
|
"update=protect off 0 3FFFF;era 0 3FFFF;" \
|
|
"cp.b C100000 0 ${filesize};" \
|
|
"setenv filesize;saveenv\0" \
|
|
"loadfile=/tftpboot/TRAB/uImage\0" \
|
|
"loadaddr=C400000\0" \
|
|
"net_load=tftpboot ${loadaddr} ${loadfile}\0" \
|
|
"net_nfs=run net_load nfs_args add_net add_misc;bootm\0" \
|
|
"kernel_addr=000C0000\0" \
|
|
"flash_nfs=run nfs_args add_net add_misc;bootm ${kernel_addr}\0" \
|
|
"mdm_init1=ATZ\0" \
|
|
"mdm_init2=ATS0=1\0" \
|
|
"mdm_flow_control=rts/cts\0"
|
|
#endif /* CONFIG_SYS_HUSH_PARSER */
|
|
#endif /* CONFIG_FLASH_8MB */
|
|
|
|
#if 1 /* feel free to disable for development */
|
|
#define CONFIG_AUTOBOOT_KEYED /* Enable password protection */
|
|
#define CONFIG_AUTOBOOT_PROMPT \
|
|
"\nEnter password - autoboot in %d sec...\n", bootdelay
|
|
#define CONFIG_AUTOBOOT_DELAY_STR "R" /* 1st "password" */
|
|
#endif
|
|
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
|
|
/* what's this ? it's not used anywhere */
|
|
#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
|
|
#endif
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
|
#define CONFIG_SYS_PROMPT "TRAB # " /* Monitor Command Prompt */
|
|
#ifdef CONFIG_SYS_HUSH_PARSER
|
|
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
|
|
#endif
|
|
|
|
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
|
|
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
|
|
|
|
#define CONFIG_SYS_MEMTEST_START 0x0C000000 /* memtest works on */
|
|
#define CONFIG_SYS_MEMTEST_END 0x0D000000 /* 16 MB in DRAM */
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR 0x0CF00000 /* default load address */
|
|
|
|
#define CONFIG_SYS_HZ 1000
|
|
|
|
/* valid baudrates */
|
|
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
|
|
|
|
#define CONFIG_MISC_INIT_R /* have misc_init_r() function */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* burn-in test stuff.
|
|
*
|
|
* BURN_IN_CYCLE_DELAY defines the seconds to wait between each burn-in cycle
|
|
* Because the burn-in test itself causes also an delay of about 4 seconds,
|
|
* this time must be subtracted from the desired overall burn-in cycle time.
|
|
*/
|
|
#define BURN_IN_CYCLE_DELAY 296 /* seconds between burn-in cycles */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Stack sizes
|
|
*
|
|
* The stack sizes are set up in start.S using the settings below
|
|
*/
|
|
#define CONFIG_STACKSIZE (128*1024) /* regular stack */
|
|
#ifdef CONFIG_USE_IRQ
|
|
#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
|
|
#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
|
|
#endif
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Physical Memory Map
|
|
*/
|
|
#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
|
|
#define PHYS_SDRAM_1 0x0C000000 /* SDRAM Bank #1 */
|
|
#ifndef CONFIG_RAM_16MB
|
|
#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
|
|
#else
|
|
#define PHYS_SDRAM_1_SIZE 0x01000000 /* 16 MB */
|
|
#endif
|
|
|
|
#define CONFIG_SYS_FLASH_BASE 0x00000000 /* Flash Bank #1 */
|
|
|
|
/* The following #defines are needed to get flash environment right */
|
|
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
|
|
#define CONFIG_SYS_MONITOR_LEN (256 << 10)
|
|
|
|
/* Dynamic MTD partition support */
|
|
#define CONFIG_CMD_MTDPARTS
|
|
#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
|
|
#define CONFIG_FLASH_CFI_MTD
|
|
#define MTDIDS_DEFAULT "nor0=0"
|
|
|
|
/* production flash layout */
|
|
#define MTDPARTS_DEFAULT "mtdparts=0:16k(Firmware1)ro," \
|
|
"16k(Env1)," \
|
|
"16k(Env2)," \
|
|
"336k(Firmware2)ro," \
|
|
"896k(Kernel)," \
|
|
"5376k(Root-FS)," \
|
|
"1408k(JFFS2)," \
|
|
"-(VFD)"
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* FLASH and environment organization
|
|
*/
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
|
|
#ifndef CONFIG_FLASH_8MB
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
|
|
#else
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 71 /* max number of sectors on one chip */
|
|
#endif
|
|
|
|
/* timeout values are in ticks */
|
|
#define CONFIG_SYS_FLASH_ERASE_TOUT (15*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
|
|
#define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) /* Timeout for Flash Write */
|
|
|
|
#define CONFIG_ENV_IS_IN_FLASH 1
|
|
|
|
/* Address and size of Primary Environment Sector */
|
|
#ifndef CONFIG_FLASH_8MB
|
|
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x60000)
|
|
#define CONFIG_ENV_SIZE 0x4000
|
|
#define CONFIG_ENV_SECT_SIZE 0x20000
|
|
#else
|
|
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x4000)
|
|
#define CONFIG_ENV_SIZE 0x4000
|
|
#define CONFIG_ENV_SECT_SIZE 0x4000
|
|
#endif
|
|
|
|
/* Address and size of Redundant Environment Sector */
|
|
#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE)
|
|
#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
|
|
|
|
#define CONFIG_SYS_USE_PPCENV /* Environment embedded in sect .ppcenv */
|
|
|
|
/* Initial value of the on-board touch screen brightness */
|
|
#define CONFIG_SYS_BRIGHTNESS 0x20
|
|
|
|
#endif /* __CONFIG_H */
|