u-boot/include/configs/crownbay.h
Bin Meng 4dd02a752c x86: crownbay: Enable on-board SMSC superio keyboard controller
So far we only enabled one legacy serial port on the SMSC LPC47m
superio chipset on Intel Crown Bay board. As the board also has
dual PS/2 ports routed out, enable the keyboard controller which
is i8042 compatible so that we can use PS/2 keyboard and mouse.

In order to make PS/2 keyboard work with the VGA console, remove
CONFIG_VGA_AS_SINGLE_DEVICE. To boot Linux kernel with PIC mode
using PIRQ routing table, adjust the mask in the device tree to
reserve irq12 which is used by PS/2 mouse.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-08-26 07:54:16 -07:00

60 lines
1.3 KiB
C

/*
* Copyright (C) 2014, Bin Meng <bmeng.cn@gmail.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
/*
* board/config.h - configuration options, board specific
*/
#ifndef __CONFIG_H
#define __CONFIG_H
#include <configs/x86-common.h>
#define CONFIG_SYS_MONITOR_LEN (1 << 20)
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_ARCH_MISC_INIT
#define CONFIG_SMSC_LPC47M
#define CONFIG_PCI_MEM_BUS 0x40000000
#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
#define CONFIG_PCI_MEM_SIZE 0x80000000
#define CONFIG_PCI_PREF_BUS 0xc0000000
#define CONFIG_PCI_PREF_PHYS CONFIG_PCI_PREF_BUS
#define CONFIG_PCI_PREF_SIZE 0x20000000
#define CONFIG_PCI_IO_BUS 0x2000
#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
#define CONFIG_PCI_IO_SIZE 0xe000
#define CONFIG_SYS_EARLY_PCI_INIT
#define CONFIG_PCI_PNP
#define CONFIG_STD_DEVICES_SETTINGS "stdin=serial,vga,usbkbd\0" \
"stdout=serial,vga\0" \
"stderr=serial,vga\0"
#define CONFIG_SCSI_DEV_LIST \
{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TCF_SATA}
#define CONFIG_SPI_FLASH_SST
#define CONFIG_MMC
#define CONFIG_SDHCI
#define CONFIG_GENERIC_MMC
#define CONFIG_MMC_SDMA
#define CONFIG_CMD_MMC
/* Topcliff Gigabit Ethernet */
#define CONFIG_PCH_GBE
#define CONFIG_PHYLIB
/* Environment configuration */
#define CONFIG_ENV_SECT_SIZE 0x1000
#define CONFIG_ENV_OFFSET 0
#endif /* __CONFIG_H */