mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-26 22:52:18 +00:00
e9a389a184
- Enable hw_watchdog_init() in watchdog.h if CONFIG_HW_WATCHDOG is defined. - Move blackfin hw watchdog driver to the generic driver folder. - Call hw_watchdog_init() from blackfin board init code. - Reuse macro CONFIG_WATCHDOG_TIMEOUT_MSECS - Update README.watchdog accordingly Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
35 lines
1.2 KiB
Text
35 lines
1.2 KiB
Text
Watchdog driver general info
|
|
|
|
CONFIG_HW_WATCHDOG
|
|
This enables hw_watchdog_reset to be called during various loops,
|
|
including waiting for a character on a serial port. But it
|
|
does not also call hw_watchdog_init. Boards which want this
|
|
enabled must call this function in their board file. This split
|
|
is useful because some rom's enable the watchdog when downloading
|
|
new code, so it must be serviced, but the board would rather it
|
|
was off. And, it cannot always be turned off once on.
|
|
|
|
CONFIG_WATCHDOG_TIMEOUT_MSECS
|
|
Can be used to change the timeout for i.mx31/35/5x/6x.
|
|
If not given, will default to maximum timeout. This would
|
|
be 128000 msec for i.mx31/35/5x/6x.
|
|
|
|
CONFIG_AT91SAM9_WATCHDOG
|
|
Available for AT91SAM9 to service the watchdog.
|
|
|
|
CONFIG_FTWDT010_WATCHDOG
|
|
Available for FTWDT010 to service the watchdog.
|
|
|
|
CONFIG_FTWDT010_HW_TIMEOUT
|
|
Can be used to change the timeout for FTWDT010.
|
|
|
|
CONFIG_IMX_WATCHDOG
|
|
Available for i.mx31/35/5x/6x to service the watchdog. This is not
|
|
automatically set because some boards (vision2) still need to define
|
|
their own hw_watchdog_reset routine.
|
|
|
|
CONFIG_XILINX_TB_WATCHDOG
|
|
Available for Xilinx Axi platforms to service timebase watchdog timer.
|
|
|
|
CONFIG_BFIN_WATCHDOG
|
|
Available for bf5xx and bf6xx to service the watchdog.
|