mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-07 05:34:28 +00:00
a09fea1d28
- In ARMv8 NXP Layerscape platforms we also need to make use of CONFIG_SYS_RELOC_GD_ENV_ADDR now, do so. - On ENV_IS_IN_REMOTE, CONFIG_ENV_OFFSET is never used, drop the define to 0. - Add Kconfig entry for ENV_ADDR. - Make ENV_ADDR / ENV_OFFSET depend on the env locations that use it. - Add ENV_xxx_REDUND options that depend on their primary option and SYS_REDUNDAND_ENVIRONMENT - On a number of PowerPC platforms, use SPL_ENV_ADDR not CONFIG_ENV_ADDR for the pre-main-U-Boot environment location. - On ENV_IS_IN_SPI_FLASH, check not for CONFIG_ENV_ADDR being set but rather it being non-zero, as it will now be zero by default. - Rework the env_offset absolute in env/embedded.o to not use CONFIG_ENV_OFFSET as it was the only use of ENV_OFFSET within ENV_IS_IN_FLASH. - Migrate all platforms. Cc: Wolfgang Denk <wd@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: uboot-stm32@st-md-mailman.stormreply.com Signed-off-by: Tom Rini <trini@konsulko.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: Simon Goldschmidt <simon.k.r.goldschmidt@gmail.com>
99 lines
2.5 KiB
C
99 lines
2.5 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* USB armory MkI board configuration settings
|
|
* http://inversepath.com/usbarmory
|
|
*
|
|
* Copyright (C) 2015, Inverse Path
|
|
* Andrej Rosano <andrej@inversepath.com>
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
#define CONFIG_SYS_FSL_CLK
|
|
|
|
#include <asm/arch/imx-regs.h>
|
|
|
|
/* U-Boot environment */
|
|
#define CONFIG_SYS_MMC_ENV_DEV 0
|
|
|
|
/* U-Boot general configurations */
|
|
#define CONFIG_SYS_CBSIZE 512
|
|
|
|
/* UART */
|
|
#define CONFIG_MXC_UART
|
|
#define CONFIG_MXC_UART_BASE UART1_BASE
|
|
|
|
/* SD/MMC */
|
|
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
|
|
#define CONFIG_SYS_FSL_ESDHC_NUM 1
|
|
|
|
/* USB */
|
|
#define CONFIG_MXC_USB_PORT 1
|
|
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
|
|
#define CONFIG_MXC_USB_FLAGS 0
|
|
|
|
/* I2C */
|
|
#define CONFIG_SYS_I2C
|
|
#define CONFIG_SYS_I2C_MXC
|
|
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
|
|
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
|
|
|
|
/* Fuse */
|
|
#define CONFIG_FSL_IIM
|
|
|
|
/* U-Boot memory offsets */
|
|
#define CONFIG_LOADADDR 0x72000000
|
|
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
|
|
|
|
/* Linux boot */
|
|
#define CONFIG_HOSTNAME "usbarmory"
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"run distro_bootcmd; " \
|
|
"setenv bootargs console=${console} ${bootargs_default}; " \
|
|
"ext2load mmc 0:1 ${kernel_addr_r} /boot/zImage; " \
|
|
"ext2load mmc 0:1 ${fdt_addr_r} /boot/${fdtfile}; " \
|
|
"bootz ${kernel_addr_r} - ${fdt_addr_r}"
|
|
|
|
#define BOOT_TARGET_DEVICES(func) func(MMC, mmc, 0)
|
|
|
|
#include <config_distro_bootcmd.h>
|
|
|
|
#define MEM_LAYOUT_ENV_SETTINGS \
|
|
"kernel_addr_r=0x70800000\0" \
|
|
"fdt_addr_r=0x71000000\0" \
|
|
"scriptaddr=0x70800000\0" \
|
|
"pxefile_addr_r=0x70800000\0" \
|
|
"ramdisk_addr_r=0x73000000\0"
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
MEM_LAYOUT_ENV_SETTINGS \
|
|
"bootargs_default=root=/dev/mmcblk0p1 rootwait rw\0" \
|
|
"fdtfile=imx53-usbarmory.dtb\0" \
|
|
"console=ttymxc0,115200\0" \
|
|
BOOTENV
|
|
|
|
#ifndef CONFIG_CMDLINE
|
|
#define USBARMORY_FIT_PATH "/boot/usbarmory.itb"
|
|
#define USBARMORY_FIT_ADDR "0x70800000"
|
|
#endif
|
|
|
|
/* Physical Memory Map */
|
|
#define PHYS_SDRAM CSD0_BASE_ADDR
|
|
#define PHYS_SDRAM_SIZE (gd->ram_size)
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
|
|
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
|
|
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
|
|
|
|
#define CONFIG_SYS_INIT_SP_OFFSET \
|
|
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_ADDR \
|
|
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
|
|
|
#define CONFIG_SYS_MEMTEST_START 0x70000000
|
|
#define CONFIG_SYS_MEMTEST_END 0x90000000
|
|
|
|
#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
|
|
|
|
#endif /* __CONFIG_H */
|