mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-12 22:33:18 +00:00
472d546054
'bool' is defined in random places. This patch consolidates them into a single header file include/linux/types.h, using stdbool.h introduced in C99. All other #define, typedef and enum are removed. They are all consistent with true = 1, false = 0. Replace FALSE, False with false. Replace TRUE, True with true. Skip *.py, *.php, lib/* files. Signed-off-by: York Sun <yorksun@freescale.com>
1958 lines
74 KiB
C
1958 lines
74 KiB
C
|
|
/**
|
|
* @file IxAtmdAccCtrl.h
|
|
*
|
|
* @date 20-Mar-2002
|
|
*
|
|
* @brief IxAtmdAcc Public API
|
|
*
|
|
* This file contains the public API of IxAtmdAcc, related to the
|
|
* control functions of the component.
|
|
*
|
|
*
|
|
* @par
|
|
* IXP400 SW Release version 2.0
|
|
*
|
|
* -- Copyright Notice --
|
|
*
|
|
* @par
|
|
* Copyright 2001-2005, Intel Corporation.
|
|
* All rights reserved.
|
|
*
|
|
* @par
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of the Intel Corporation nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* @par
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS''
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* @par
|
|
* -- End of Copyright Notice --
|
|
*/
|
|
|
|
/* ------------------------------------------------------
|
|
Doxygen group definitions
|
|
------------------------------------------------------ */
|
|
|
|
/**
|
|
*
|
|
* @defgroup IxAtmdAccCtrlAPI IXP400 ATM Driver Access (IxAtmdAcc) Control API
|
|
*
|
|
* @brief The public API for the IXP400 Atm Driver Control component
|
|
*
|
|
* IxAtmdAcc is the low level interface by which AAL PDU get transmitted
|
|
* to,and received from the Utopia bus
|
|
*
|
|
* This part is related to the Control configuration
|
|
*
|
|
* @{
|
|
*/
|
|
|
|
#ifndef IXATMDACCCTRL_H
|
|
#define IXATMDACCCTRL_H
|
|
|
|
#include "IxAtmdAcc.h"
|
|
|
|
/* ------------------------------------------------------
|
|
AtmdAccCtrl Data Types definition
|
|
------------------------------------------------------ */
|
|
|
|
/**
|
|
*
|
|
* @ingroup IxAtmdAccCtrlAPI
|
|
*
|
|
* @def IX_ATMDACC_PORT_DISABLE_IN_PROGRESS
|
|
*
|
|
* @brief Port enable return code
|
|
*
|
|
* This constant is used to tell IxAtmDAcc user that the port disable
|
|
* functions are not complete. The user can call ixAtmdAccPortDisableComplete()
|
|
* to find out when the disable has finished. The port enable can then proceed.
|
|
*
|
|
*/
|
|
#define IX_ATMDACC_PORT_DISABLE_IN_PROGRESS 5
|
|
|
|
/**
|
|
*
|
|
* @ingroup IxAtmdAccCtrlAPI
|
|
*
|
|
* @def IX_ATMDACC_ALLPDUS
|
|
*
|
|
* @brief All PDUs
|
|
*
|
|
* This constant is used to tell IxAtmDAcc to process all PDUs from
|
|
* the RX queue or the TX Done
|
|
*
|
|
* @sa IxAtmdAccRxDispatcher
|
|
* @sa IxAtmdAccTxDoneDispatcher
|
|
*
|
|
*/
|
|
#define IX_ATMDACC_ALLPDUS 0xffffffff
|
|
|
|
/* ------------------------------------------------------
|
|
Part of the IxAtmdAcc interface related to RX traffic
|
|
------------------------------------------------------ */
|
|
|
|
/**
|
|
*
|
|
* @ingroup IxAtmdAccCtrlAPI
|
|
*
|
|
* @brief Callback prototype for notification of available PDUs for
|
|
* an Rx Q.
|
|
*
|
|
* This a protoype for a function which is called when there is at
|
|
* least one Pdu available for processing on a particular Rx Q.
|
|
*
|
|
* This function should call @a ixAtmdAccRxDispatch() with
|
|
* the aprropriate number of parameters to read and process the Rx Q.
|
|
*
|
|
* @sa ixAtmdAccRxDispatch
|
|
* @sa ixAtmdAccRxVcConnect
|
|
* @sa ixAtmdAccRxDispatcherRegister
|
|
*
|
|
* @param rxQueueId @ref IxAtmRxQueueId [in] indicates which RX queue to has Pdus to process.
|
|
* @param numberOfPdusToProcess unsigned int [in] indicates the minimum number of
|
|
* PDUs available to process all PDUs from the queue.
|
|
* @param reservedPtr unsigned int* [out] pointer to a int location which can
|
|
* be written to, but does not retain written values. This is
|
|
* provided to make this prototype compatible
|
|
* with @a ixAtmdAccRxDispatch()
|
|
*
|
|
* @return @li int - ignored.
|
|
*
|
|
*/
|
|
typedef IX_STATUS (*IxAtmdAccRxDispatcher) (IxAtmRxQueueId rxQueueId,
|
|
unsigned int numberOfPdusToProcess,
|
|
unsigned int *reservedPtr);
|
|
|
|
/* ------------------------------------------------------
|
|
Part of the IxAtmdAcc interface related to TX traffic
|
|
------------------------------------------------------ */
|
|
|
|
/**
|
|
*
|
|
* @ingroup IxAtmdAccCtrlAPI
|
|
*
|
|
* @brief Callback prototype for transmitted mbuf when threshold level is
|
|
* crossed.
|
|
*
|
|
* IxAtmdAccTxDoneDispatcher is the prototype of the user function
|
|
* which get called when pdus are completely transmitted. This function
|
|
* is likely to call the @a ixAtmdAccTxDoneDispatch() function.
|
|
*
|
|
* This function is called when the number of available pdus for
|
|
* reception is crossing the threshold level as defined
|
|
* in @a ixAtmdAccTxDoneDispatcherRegister()
|
|
*
|
|
* This function is called inside an Qmgr dispatch context. No system
|
|
* resource or interrupt-unsafe feature should be used inside this
|
|
* callback.
|
|
*
|
|
* Transmitted buffers recycling implementation is a sytem-wide mechanism
|
|
* and needs to be set before any traffic is started. If this threshold
|
|
* mechanism is not used, the user is responsible for polling the
|
|
* transmitted buffers with @a ixAtmdAccTxDoneDispatch()
|
|
* and @a ixAtmdAccTxDoneLevelQuery() functions.
|
|
*
|
|
* @sa ixAtmdAccTxDoneDispatcherRegister
|
|
* @sa ixAtmdAccTxDoneDispatch
|
|
* @sa ixAtmdAccTxDoneLevelQuery
|
|
*
|
|
* @param numberOfPdusToProcess unsigned int [in] - The current number of pdus currently
|
|
* available for recycling
|
|
* @param *reservedPtr unsigned int [out] - pointer to a int location which can be
|
|
* written to but does not retain written values. This is provided
|
|
* to make this prototype compatible
|
|
* with @a ixAtmdAccTxDoneDispatch()
|
|
*
|
|
* @return @li IX_SUCCESS This is provided to make
|
|
* this prototype compatible with @a ixAtmdAccTxDoneDispatch()
|
|
* @return @li IX_FAIL invalid parameters or some unspecified internal
|
|
* error occured. This is provided to make
|
|
* this prototype compatible with @a ixAtmdAccTxDoneDispatch()
|
|
*
|
|
*/
|
|
typedef IX_STATUS (*IxAtmdAccTxDoneDispatcher) (unsigned int numberOfPdusToProcess,
|
|
unsigned int *reservedPtr);
|
|
|
|
/**
|
|
*
|
|
* @ingroup IxAtmdAccCtrlAPI
|
|
*
|
|
* @brief Notification that the threshold number of scheduled cells
|
|
* remains in a port's transmit Q.
|
|
*
|
|
* The is the prototype for of the user notification function which
|
|
* gets called on a per-port basis, when the number of remaining
|
|
* scheduled cells to be transmitted decreases to the threshold level.
|
|
* The number of cells passed as a parameter can be used for scheduling
|
|
* purposes as the maximum number of cells that can be passed in a
|
|
* schedule table to the @a ixAtmdAccPortTxProcess() function.
|
|
*
|
|
* @sa ixAtmdAccPortTxCallbackRegister
|
|
* @sa ixAtmdAccPortTxProcess
|
|
* @sa ixAtmdAccPortTxFreeEntriesQuery
|
|
*
|
|
* @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1]
|
|
* @param numberOfAvailableCells unsigned int [in] - number of available
|
|
* cell entries.for the port
|
|
*
|
|
* @note - This functions shall not use system resources when used
|
|
* inside an interrupt context.
|
|
*
|
|
*/
|
|
typedef void (*IxAtmdAccPortTxLowCallback) (IxAtmLogicalPort port,
|
|
unsigned int numberOfAvailableCells);
|
|
|
|
/**
|
|
*
|
|
* @ingroup IxAtmdAccCtrlAPI
|
|
*
|
|
* @brief Prototype to submit cells for transmission
|
|
*
|
|
* IxAtmdAccTxVcDemandUpdateCallback is the prototype of the callback
|
|
* function used by AtmD to notify an ATM Scheduler that the user of
|
|
* a VC has submitted cells for transmission.
|
|
*
|
|
* @sa IxAtmdAccTxVcDemandUpdateCallback
|
|
* @sa IxAtmdAccTxVcDemandClearCallback
|
|
* @sa IxAtmdAccTxSchVcIdGetCallback
|
|
* @sa ixAtmdAccPortTxScheduledModeEnable
|
|
*
|
|
* @param port @ref IxAtmLogicalPort [in] - Specifies the ATM port on which the VC to be updated
|
|
* is established
|
|
* @param vcId int [in] - Identifies the VC to be updated. This is the value
|
|
* returned by the @a IxAtmdAccTxSchVcIdGetCallback() call .
|
|
* @param numberOfCells unsigned int [in] - Indicates how many ATM cells should be added
|
|
* to the queue for this VC.
|
|
*
|
|
* @return @li IX_SUCCESS the function is registering the cell demand for
|
|
* this VC.
|
|
* @return @li IX_FAIL the function cannot register cell for this VC : the
|
|
* scheduler maybe overloaded or misconfigured
|
|
*
|
|
*/
|
|
typedef IX_STATUS (*IxAtmdAccTxVcDemandUpdateCallback) (IxAtmLogicalPort port,
|
|
int vcId,
|
|
unsigned int numberOfCells);
|
|
|
|
/**
|
|
*
|
|
* @ingroup IxAtmdAccCtrlAPI
|
|
*
|
|
* @brief prototype to remove all currently queued cells from a
|
|
* registered VC
|
|
*
|
|
* IxAtmdAccTxVcDemandClearCallback is the prototype of the function
|
|
* to remove all currently queued cells from a registered VC. The
|
|
* pending cell count for the specified VC is reset to zero. After the
|
|
* use of this callback, the scheduler shall not schedule more cells
|
|
* for this VC.
|
|
*
|
|
* This callback function is called during a VC disconnection
|
|
* @a ixAtmdAccTxVcTryDisconnect()
|
|
*
|
|
* @sa IxAtmdAccTxVcDemandUpdateCallback
|
|
* @sa IxAtmdAccTxVcDemandClearCallback
|
|
* @sa IxAtmdAccTxSchVcIdGetCallback
|
|
* @sa ixAtmdAccPortTxScheduledModeEnable
|
|
* @sa ixAtmdAccTxVcTryDisconnect
|
|
*
|
|
* @param port @ref IxAtmLogicalPort [in] - Specifies the ATM port on which the VC to be cleared
|
|
* is established
|
|
* @param vcId int [in] - Identifies the VC to be cleared. This is the value
|
|
* returned by the @a IxAtmdAccTxSchVcIdGetCallback() call .
|
|
*
|
|
* @return none
|
|
*
|
|
*/
|
|
typedef void (*IxAtmdAccTxVcDemandClearCallback) (IxAtmLogicalPort port,
|
|
int vcId);
|
|
|
|
/**
|
|
*
|
|
* @ingroup IxAtmdAccCtrlAPI
|
|
*
|
|
* @brief prototype to get a scheduler vc id
|
|
*
|
|
* IxAtmdAccTxSchVcIdGetCallback is the prototype of the function to get
|
|
* a scheduler vcId
|
|
*
|
|
* @sa IxAtmdAccTxVcDemandUpdateCallback
|
|
* @sa IxAtmdAccTxVcDemandClearCallback
|
|
* @sa IxAtmdAccTxSchVcIdGetCallback
|
|
* @sa ixAtmdAccPortTxScheduledModeEnable
|
|
*
|
|
* @param port @ref IxAtmLogicalPort [in] - Specifies the ATM logical port on which the VC is
|
|
* established
|
|
* @param vpi unsigned int [in] - For AAL0/AAL5 specifies the ATM vpi on which the
|
|
* VC is established.
|
|
* For OAM specifies the dedicated "OAM Tx channel" VPI.
|
|
* @param vci unsigned int [in] - For AAL0/AAL5 specifies the ATM vci on which the
|
|
* VC is established.
|
|
* For OAM specifies the dedicated "OAM Tx channel" VCI.
|
|
* @param connId @ref IxAtmConnId [in] - specifies the IxAtmdAcc connection Id already
|
|
* associated with this VC
|
|
* @param vcId int* [out] - pointer to a vcId
|
|
*
|
|
* @return @li IX_SUCCESS the function is returning a Scheduler vcId for this
|
|
* VC
|
|
* @return @li IX_FAIL the function cannot process scheduling for this VC.
|
|
* the contents of vcId is unspecified
|
|
*
|
|
*/
|
|
typedef IX_STATUS (*IxAtmdAccTxSchVcIdGetCallback) (IxAtmLogicalPort port,
|
|
unsigned int vpi,
|
|
unsigned int vci,
|
|
IxAtmConnId connId,
|
|
int *vcId);
|
|
|
|
/* ------------------------------------------------------
|
|
Part of the IxAtmdAcc interface related to RX traffic
|
|
------------------------------------------------------ */
|
|
|
|
/**
|
|
*
|
|
* @ingroup IxAtmdAccCtrlAPI
|
|
*
|
|
* @fn ixAtmdAccRxDispatcherRegister (
|
|
IxAtmRxQueueId queueId,
|
|
IxAtmdAccRxDispatcher callback)
|
|
*
|
|
* @brief Register a notification callback to be invoked when there is
|
|
* at least one entry on a particular Rx queue.
|
|
*
|
|
* This function registers a callback to be invoked when there is at
|
|
* least one entry in a particular queue. The registered callback is
|
|
* called every time when the hardware adds one or more pdus to the
|
|
* specified Rx queue.
|
|
*
|
|
* This function cannot be used when a Rx Vc using this queue is
|
|
* already existing.
|
|
*
|
|
* @note -The callback function can be the API function
|
|
* @a ixAtmdAccRxDispatch() : every time the threhold level
|
|
* of the queue is reached, the ixAtmdAccRxDispatch() is
|
|
* invoked to remove all entries from the queue.
|
|
*
|
|
* @sa ixAtmdAccRxDispatch
|
|
* @sa IxAtmdAccRxDispatcher
|
|
*
|
|
* @param queueId @ref IxAtmRxQueueId [in] RX queue identification
|
|
* @param callback @ref IxAtmdAccRxDispatcher [in] function triggering the delivery of incoming
|
|
* traffic. This parameter cannot be a null pointer.
|
|
*
|
|
* @return @li IX_SUCCESS Successful call to @a ixAtmdAccRxDispatcherRegister()
|
|
* @return @li IX_FAIL error in the parameters, or there is an
|
|
* already active RX VC for this queue or some unspecified
|
|
* internal error occurred.
|
|
*
|
|
*/
|
|
PUBLIC IX_STATUS ixAtmdAccRxDispatcherRegister (
|
|
IxAtmRxQueueId queueId,
|
|
IxAtmdAccRxDispatcher callback);
|
|
|
|
/**
|
|
*
|
|
* @ingroup IxAtmdAccCtrlAPI
|
|
*
|
|
* @fn ixAtmdAccRxDispatch (IxAtmRxQueueId rxQueueId,
|
|
unsigned int numberOfPdusToProcess,
|
|
unsigned int *numberOfPdusProcessedPtr)
|
|
*
|
|
*
|
|
* @brief Control function which executes Rx processing for a particular
|
|
* Rx stream.
|
|
*
|
|
* The @a IxAtmdAccRxDispatch() function is used to process received Pdus
|
|
* available from one of the two incoming RX streams. When this function
|
|
* is invoked, the incoming traffic (up to the number of PDUs passed as
|
|
* a parameter) will be transferred to the IxAtmdAcc users through the
|
|
* callback @a IxAtmdAccRxVcRxCallback(), as registered during the
|
|
* @a ixAtmdAccRxVcConnect() call.
|
|
*
|
|
* The user receive callbacks will be executed in the context of this
|
|
* function.
|
|
*
|
|
* Failing to use this function on a regular basis when there is traffic
|
|
* will block incoming traffic and can result in Pdus being dropped by
|
|
* the hardware.
|
|
*
|
|
* This should be used to control when received pdus are handed off from
|
|
* the hardware to Aal users from a particluar stream. The function can
|
|
* be used from a timer context, or can be registered as a callback in
|
|
* response to an rx stream threshold event, or can be used inside an
|
|
* active polling mechanism which is under user control.
|
|
*
|
|
* @note - The signature of this function is directly compatible with the
|
|
* callback prototype which can be register with @a ixAtmdAccRxDispatcherRegister().
|
|
*
|
|
* @sa ixAtmdAccRxDispatcherRegister
|
|
* @sa IxAtmdAccRxVcRxCallback
|
|
* @sa ixAtmdAccRxVcFreeEntriesQuery
|
|
*
|
|
* @param rxQueueId @ref IxAtmRxQueueId [in] - indicates which RX queue to process.
|
|
* @param numberOfPdusToProcess unsigned int [in] - indicates the maxiumum number of PDU to
|
|
* remove from the RX queue. A value of IX_ATMDACC_ALLPDUS indicates
|
|
* to process all PDUs from the queue. This includes at least the PDUs
|
|
* in the queue when the fuction is invoked. Because of real-time
|
|
* constraints, there is no guarantee thatthe queue will be empty
|
|
* when the function exits. If this parameter is greater than the
|
|
* number of entries of the queues, the function will succeed
|
|
* and the parameter numberOfPdusProcessedPtr will reflect the exact
|
|
* number of PDUs processed.
|
|
* @param *numberOfPdusProcessedPtr unsigned int [out] - indicates the actual number of PDU
|
|
* processed during this call. This parameter cannot be a null
|
|
* pointer.
|
|
*
|
|
* @return @li IX_SUCCESS the number of PDUs as indicated in
|
|
* numberOfPdusProcessedPtr are removed from the RX queue and the VC callback
|
|
* are called.
|
|
* @return @li IX_FAIL invalid parameters or some unspecified internal
|
|
* error occured.
|
|
*
|
|
*/
|
|
PUBLIC IX_STATUS ixAtmdAccRxDispatch (IxAtmRxQueueId rxQueueId,
|
|
unsigned int numberOfPdusToProcess,
|
|
unsigned int *numberOfPdusProcessedPtr);
|
|
|
|
/**
|
|
*
|
|
* @ingroup IxAtmdAccCtrlAPI
|
|
*
|
|
* @fn ixAtmdAccRxLevelQuery (IxAtmRxQueueId rxQueueId,
|
|
unsigned int *numberOfPdusPtr)
|
|
*
|
|
* @brief Query the number of entries in a particular RX queue.
|
|
*
|
|
* This function is used to retrieve the number of pdus received by
|
|
* the hardware and ready for distribution to users.
|
|
*
|
|
* @param rxQueueId @ref IxAtmRxQueueId [in] - indicates which of two RX queues to query.
|
|
* @param numberOfPdusPtr unsigned int* [out] - Pointer to store the number of available
|
|
* PDUs in the RX queue. This parameter cannot be a null pointer.
|
|
*
|
|
* @return @li IX_SUCCESS the value in numberOfPdusPtr specifies the
|
|
* number of incoming pdus waiting in this queue
|
|
* @return @li IX_FAIL an error occurs during processing.
|
|
* The value in numberOfPdusPtr is unspecified.
|
|
*
|
|
* @note - This function is reentrant, doesn't use system resources
|
|
* and can be used from an interrupt context.
|
|
*
|
|
*/
|
|
PUBLIC IX_STATUS ixAtmdAccRxLevelQuery (IxAtmRxQueueId rxQueueId,
|
|
unsigned int *numberOfPdusPtr);
|
|
|
|
/**
|
|
*
|
|
* @ingroup IxAtmdAccCtrlAPI
|
|
*
|
|
* @fn ixAtmdAccRxQueueSizeQuery (IxAtmRxQueueId rxQueueId,
|
|
unsigned int *numberOfPdusPtr)
|
|
*
|
|
* @brief Query the size of a particular RX queue.
|
|
*
|
|
* This function is used to retrieve the number of pdus the system is
|
|
* able to queue when reception is complete.
|
|
*
|
|
* @param rxQueueId @ref IxAtmRxQueueId [in] - indicates which of two RX queues to query.
|
|
* @param numberOfPdusPtr unsigned int* [out] - Pointer to store the number of pdus
|
|
* the system is able to queue in the RX queue. This parameter
|
|
* cannot be a null pointer.
|
|
*
|
|
* @return @li IX_SUCCESS the value in numberOfPdusPtr specifies the
|
|
* number of pdus the system is able to queue.
|
|
* @return @li IX_FAIL an error occurs during processing.
|
|
* The value in numberOfPdusPtr is unspecified.
|
|
*
|
|
* @note - This function is reentrant, doesn't use system resources
|
|
* and can be used from an interrupt context.
|
|
*
|
|
*/
|
|
PUBLIC IX_STATUS ixAtmdAccRxQueueSizeQuery (IxAtmRxQueueId rxQueueId,
|
|
unsigned int *numberOfPdusPtr);
|
|
|
|
/* ------------------------------------------------------
|
|
Part of the IxAtmdAcc interface related to TX traffic
|
|
------------------------------------------------------ */
|
|
|
|
/**
|
|
*
|
|
* @ingroup IxAtmdAccCtrlAPI
|
|
*
|
|
* @fn ixAtmdAccPortTxFreeEntriesQuery (IxAtmLogicalPort port,
|
|
unsigned int *numberOfCellsPtr)
|
|
*
|
|
* @brief Get the number of available cells the system can accept for
|
|
* transmission.
|
|
*
|
|
* The function is used to retrieve the number of cells that can be
|
|
* queued for transmission to the hardware.
|
|
*
|
|
* This number is based on the worst schedule table where one cell
|
|
* is stored in one schedule table entry, depending on the pdus size
|
|
* and mbuf size and fragmentation.
|
|
*
|
|
* This function doesn't use system resources and can be used from a
|
|
* timer context, or can be associated with a threshold event, or can
|
|
* be used inside an active polling mechanism
|
|
*
|
|
* @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1]
|
|
* @param numberOfCellsPtr unsigned int* [out] - number of available cells.
|
|
* This parameter cannot be a null pointer.
|
|
*
|
|
* @sa ixAtmdAccPortTxProcess
|
|
*
|
|
* @return @li IX_SUCCESS numberOfCellsPtr contains the number of cells that can be scheduled
|
|
* for this port.
|
|
* @return @li IX_FAIL error in the parameters, or some processing error
|
|
* occured.
|
|
*
|
|
*/
|
|
PUBLIC IX_STATUS ixAtmdAccPortTxFreeEntriesQuery (IxAtmLogicalPort port,
|
|
unsigned int *numberOfCellsPtr);
|
|
|
|
/**
|
|
*
|
|
* @ingroup IxAtmdAccCtrlAPI
|
|
*
|
|
* @fn ixAtmdAccPortTxCallbackRegister (IxAtmLogicalPort port,
|
|
unsigned int numberOfCells,
|
|
IxAtmdAccPortTxLowCallback callback)
|
|
*
|
|
* @brief Configure the Tx port threshold value and register a callback to handle
|
|
* threshold notifications.
|
|
*
|
|
* This function sets the threshold in cells
|
|
*
|
|
* @sa ixAtmdAccPortTxCallbackRegister
|
|
* @sa ixAtmdAccPortTxProcess
|
|
* @sa ixAtmdAccPortTxFreeEntriesQuery
|
|
*
|
|
* @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1]
|
|
* @param numberOfCells unsigned int [in] - threshold value which triggers the callback
|
|
* invocation, This number has to be one of the
|
|
* values 0,1,2,4,8,16,32 ....
|
|
* The maximum value cannot be more than half of the txVc queue
|
|
* size (which can be retrieved using @a ixAtmdAccPortTxFreeEntriesQuery()
|
|
* before any Tx traffic is sent for this port)
|
|
* @param callback @ref IxAtmdAccPortTxLowCallback [in] - callback function to invoke when the threshold
|
|
* level is reached.
|
|
* This parameter cannot be a null pointer.
|
|
*
|
|
* @return @li IX_SUCCESS Successful call to @a ixAtmdAccPortTxCallbackRegister()
|
|
* @return @li IX_FAIL error in the parameters, Tx channel already set for this port
|
|
* threshold level is not correct or within the range regarding the
|
|
* queue size:or unspecified error during processing:
|
|
*
|
|
* @note - This callback function get called when the threshold level drops from
|
|
* (numberOfCells+1) cells to (numberOfCells) cells
|
|
*
|
|
* @note - This function should be called during system initialisation,
|
|
* outside an interrupt context
|
|
*
|
|
*/
|
|
PUBLIC IX_STATUS ixAtmdAccPortTxCallbackRegister (IxAtmLogicalPort port,
|
|
unsigned int numberOfCells,
|
|
IxAtmdAccPortTxLowCallback callback);
|
|
|
|
/**
|
|
*
|
|
* @ingroup IxAtmdAccCtrlAPI
|
|
*
|
|
* @fn ixAtmdAccPortTxScheduledModeEnable (IxAtmLogicalPort port,
|
|
IxAtmdAccTxVcDemandUpdateCallback vcDemandUpdateCallback,
|
|
IxAtmdAccTxVcDemandClearCallback vcDemandClearCallback,
|
|
IxAtmdAccTxSchVcIdGetCallback vcIdGetCallback)
|
|
*
|
|
* @brief Put the port into Scheduled Mode
|
|
*
|
|
* This function puts the specified port into scheduled mode of
|
|
* transmission which means an external s/w entity controls the
|
|
* transmission of cells on this port. This faciltates traffic shaping on
|
|
* the port.
|
|
*
|
|
* Any buffers submitted on a VC for this port will be queued in IxAtmdAcc.
|
|
* The transmission of these buffers to and by the hardware will be driven
|
|
* by a transmit schedule submitted regulary in calls to
|
|
* @a ixAtmdAccPortTxProcess() by traffic shaping entity.
|
|
*
|
|
* The transmit schedule is expected to be dynamic in nature based on
|
|
* the demand in cells for each VC on the port. Hence the callback
|
|
* parameters provided to this function allow IxAtmdAcc to inform the
|
|
* shaping entity of demand changes for each VC on the port.
|
|
*
|
|
* By default a port is in Unscheduled Mode so if this function is not
|
|
* called, transmission of data is done without sheduling rules, on a
|
|
* first-come, first-out basis.
|
|
*
|
|
* Once a port is put in scheduled mode it cannot be reverted to
|
|
* un-scheduled mode. Note that unscheduled mode is not supported
|
|
* in ixp425 1.0
|
|
*
|
|
* @note - This function should be called before any VCs have be
|
|
* connected on a port. Otherwise this function call will return failure.
|
|
*
|
|
* @note - This function uses internal locks and should not be called from
|
|
* an interrupt context
|
|
*
|
|
* @sa IxAtmdAccTxVcDemandUpdateCallback
|
|
* @sa IxAtmdAccTxVcDemandClearCallback
|
|
* @sa IxAtmdAccTxSchVcIdGetCallback
|
|
* @sa ixAtmdAccPortTxProcess
|
|
*
|
|
* @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1]
|
|
* @param vcDemandUpdateCallback @ref IxAtmdAccTxVcDemandUpdateCallback [in] - callback function used to update
|
|
* the number of outstanding cells for transmission. This parameter
|
|
* cannot be a null pointer.
|
|
* @param vcDemandClearCallback @ref IxAtmdAccTxVcDemandClearCallback [in] - callback function used to remove all
|
|
* clear the number of outstanding cells for a VC. This parameter
|
|
* cannot be a null pointer.
|
|
* @param vcIdGetCallback @ref IxAtmdAccTxSchVcIdGetCallback [in] - callback function used to exchange vc
|
|
* Identifiers between IxAtmdAcc and the entity supplying the
|
|
* transmit schedule. This parameter cannot be a null pointer.
|
|
*
|
|
* @return @li IX_SUCCESS scheduler registration is complete and the port
|
|
* is now in scheduled mode.
|
|
* @return @li IX_FAIL failed (wrong parameters, or traffic is already
|
|
* enabled on this port, possibly without ATM shaping)
|
|
*
|
|
*/
|
|
PUBLIC IX_STATUS ixAtmdAccPortTxScheduledModeEnable (IxAtmLogicalPort port,
|
|
IxAtmdAccTxVcDemandUpdateCallback vcDemandUpdateCallback,
|
|
IxAtmdAccTxVcDemandClearCallback vcDemandClearCallback,
|
|
IxAtmdAccTxSchVcIdGetCallback vcIdGetCallback);
|
|
|
|
/**
|
|
*
|
|
* @ingroup IxAtmdAccCtrlAPI
|
|
*
|
|
* @fn ixAtmdAccPortTxProcess (IxAtmLogicalPort port,
|
|
IxAtmScheduleTable* scheduleTablePtr)
|
|
*
|
|
* @brief Transmit queue cells to the H/W based on the supplied schedule
|
|
* table.
|
|
*
|
|
* This function @a ixAtmdAccPortTxProcess() process the schedule
|
|
* table provided as a parameter to the function. As a result cells are
|
|
* sent to the underlaying hardware for transmission.
|
|
*
|
|
* The schedule table is executed in its entirety or not at all. So the
|
|
* onus is on the caller not to submit a table containing more cells than
|
|
* can be transmitted at that point. The maximum numbers that can be
|
|
* transmitted is guaranteed to be the number of cells as returned by the
|
|
* function @a ixAtmdAccPortTxFreeEntriesQuery().
|
|
*
|
|
* When the scheduler is invoked on a threshold level, IxAtmdAcc gives the
|
|
* minimum number of cells (to ensure the callback will fire again later)
|
|
* and the maximum number of cells that @a ixAtmdAccPortTxProcess()
|
|
* will be able to process (assuming the ATM scheduler is able
|
|
* to produce the worst-case schedule table, i.e. one entry per cell).
|
|
*
|
|
* When invoked ouside a threshold level, the overall number of cells of
|
|
* the schedule table should be less than the number of cells returned
|
|
* by the @a ixAtmdAccPortTxFreeEntriesQuery() function.
|
|
*
|
|
* After invoking the @a ixAtmdAccPortTxProcess() function, it is the
|
|
* user choice to query again the queue level with the function
|
|
* @a ixAtmdAccPortTxFreeEntriesQuery() and, depending on a new cell
|
|
* number, submit an other schedule table.
|
|
*
|
|
* IxAtmdAcc will check that the number of cells in the schedule table
|
|
* is compatible with the current transmit level. If the
|
|
*
|
|
* Obsolete or invalid connection Id will be silently discarded.
|
|
*
|
|
* This function is not reentrant for the same port.
|
|
*
|
|
* This functions doesn't use system resources and can be used inside an
|
|
* interrupt context.
|
|
*
|
|
* This function is used as a response to the hardware requesting more
|
|
* cells to transmit.
|
|
*
|
|
* @sa ixAtmdAccPortTxScheduledModeEnable
|
|
* @sa ixAtmdAccPortTxFreeEntriesQuery
|
|
* @sa ixAtmdAccPortTxCallbackRegister
|
|
* @sa ixAtmdAccPortEnable
|
|
*
|
|
* @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1]
|
|
* @param scheduleTablePtr @ref IxAtmScheduleTable* [in] - pointer to a scheduler update table. The
|
|
* content of this table is not modified by this function. This
|
|
* parameter cannot be a null pointer.
|
|
*
|
|
* @return @li IX_SUCCESS the schedule table process is complete
|
|
* and cells are transmitted to the hardware
|
|
* @return @li IX_ATMDACC_WARNING : Traffic will be dropped: the schedule table exceed
|
|
* the hardware capacity If this error is ignored, further traffic
|
|
* and schedule will work correctly.
|
|
* Overscheduling does not occur when the schedule table does
|
|
* not contain more entries that the number of free entries returned
|
|
* by @a ixAtmdAccPortTxFreeEntriesQuery().
|
|
* However, Disconnect attempts just after this error will fail permanently
|
|
* with the error code @a IX_ATMDACC_RESOURCES_STILL_ALLOCATED, and it is
|
|
* necessary to disable the port to make @a ixAtmdAccTxVcTryDisconnect()
|
|
* successful.
|
|
* @return @li IX_FAIL a wrong parameter is supplied, or the format of
|
|
* the schedule table is invalid, or the port is not Enabled, or
|
|
* an internal severe error occured. No cells is transmitted to the hardware
|
|
*
|
|
* @note - If the failure is linked to an overschedule of data cells
|
|
* the result is an inconsistency in the output traffic (one or many
|
|
* cells may be missing and the traffic contract is not respected).
|
|
*
|
|
*/
|
|
PUBLIC IX_STATUS ixAtmdAccPortTxProcess (IxAtmLogicalPort port,
|
|
IxAtmScheduleTable* scheduleTablePtr);
|
|
|
|
/**
|
|
*
|
|
* @ingroup IxAtmdAccCtrlAPI
|
|
*
|
|
* @fn ixAtmdAccTxDoneDispatch (unsigned int numberOfPdusToProcess,
|
|
unsigned int *numberOfPdusProcessedPtr)
|
|
*
|
|
* @brief Process a number of pending transmit done pdus from the hardware.
|
|
*
|
|
* As a by-product of Atm transmit operation buffers which transmission
|
|
* is complete need to be recycled to users. This function is invoked
|
|
* to service the oustanding list of transmitted buffers and pass them
|
|
* to VC users.
|
|
*
|
|
* Users are handed back pdus by invoking the free callback registered
|
|
* during the @a ixAtmdAccTxVcConnect() call.
|
|
*
|
|
* There is a single Tx done stream servicing all active Atm Tx ports
|
|
* which can contain a maximum of 64 entries. If this stream fills port
|
|
* transmission will stop so this function must be call sufficently
|
|
* frequently to ensure no disruption to the transmit operation.
|
|
*
|
|
* This function can be used from a timer context, or can be associated
|
|
* with a TxDone level threshold event (see @a ixAtmdAccTxDoneDispatcherRegister() ),
|
|
* or can be used inside an active polling mechanism under user control.
|
|
*
|
|
* For ease of use the signature of this function is compatible with the
|
|
* TxDone threshold event callback prototype.
|
|
*
|
|
* This functions can be used inside an interrupt context.
|
|
*
|
|
* @sa ixAtmdAccTxDoneDispatcherRegister
|
|
* @sa IxAtmdAccTxVcBufferReturnCallback
|
|
* @sa ixAtmdAccTxDoneLevelQuery
|
|
*
|
|
* @param numberOfPdusToProcess unsigned int [in] - maxiumum number of pdus to remove
|
|
* from the TX Done queue
|
|
* @param *numberOfPdusProcessedPtr unsigned int [out] - number of pdus removed from
|
|
* the TX Done queue. This parameter cannot be a null pointer.
|
|
*
|
|
* @return @li IX_SUCCESS the number of pdus as indicated in
|
|
* numberOfPdusToProcess are removed from the TX Done hardware
|
|
* and passed to the user through the Tx Done callback registered
|
|
* during a call to @a ixAtmdAccTxVcConnect()
|
|
* @return @li IX_FAIL invalid parameters or numberOfPdusProcessedPtr is
|
|
* a null pointer or some unspecified internal error occured.
|
|
*
|
|
*/
|
|
PUBLIC IX_STATUS
|
|
ixAtmdAccTxDoneDispatch (unsigned int numberOfPdusToProcess,
|
|
unsigned int *numberOfPdusProcessedPtr);
|
|
|
|
/**
|
|
*
|
|
* @ingroup IxAtmdAccCtrlAPI
|
|
*
|
|
* @fn ixAtmdAccTxDoneLevelQuery (unsigned int *numberOfPdusPtr)
|
|
*
|
|
* @brief Query the current number of transmit pdus ready for
|
|
* recycling.
|
|
*
|
|
* This function is used to get the number of transmitted pdus which
|
|
* the hardware is ready to hand back to user.
|
|
*
|
|
* This function can be used from a timer context, or can be associated
|
|
* with a threshold event, on can be used inside an active polling
|
|
* mechanism
|
|
*
|
|
* @sa ixAtmdAccTxDoneDispatch
|
|
*
|
|
* @param *numberOfPdusPtr unsigned int [out] - Pointer to the number of pdus transmitted
|
|
* at the time of this function call, and ready for recycling
|
|
* This parameter cannot be a null pointer.
|
|
*
|
|
* @return @li IX_SUCCESS numberOfPdusPtr contains the number of pdus
|
|
* ready for recycling at the time of this function call
|
|
*
|
|
* @return @li IX_FAIL wrong parameter (null pointer as parameter).or
|
|
* unspecified rocessing error occurs..The value in numberOfPdusPtr
|
|
* is unspecified.
|
|
*
|
|
*/
|
|
PUBLIC IX_STATUS
|
|
ixAtmdAccTxDoneLevelQuery (unsigned int *numberOfPdusPtr);
|
|
|
|
/**
|
|
*
|
|
* @ingroup IxAtmdAccCtrlAPI
|
|
*
|
|
* @fn ixAtmdAccTxDoneQueueSizeQuery (unsigned int *numberOfPdusPtr)
|
|
*
|
|
* @brief Query the TxDone queue size.
|
|
*
|
|
* This function is used to get the number of pdus which
|
|
* the hardware is able to store after transmission is complete
|
|
*
|
|
* The returned value can be used to set a threshold and enable
|
|
* a callback to be notified when the number of pdus is going over
|
|
* the threshold.
|
|
*
|
|
* @sa ixAtmdAccTxDoneDispatcherRegister
|
|
*
|
|
* @param *numberOfPdusPtr unsigned int [out] - Pointer to the number of pdus the system
|
|
* is able to queue after transmission
|
|
*
|
|
* @return @li IX_SUCCESS numberOfPdusPtr contains the the number of
|
|
* pdus the system is able to queue after transmission
|
|
* @return @li IX_FAIL wrong parameter (null pointer as parameter).or
|
|
* unspecified rocessing error occurs..The value in numberOfPdusPtr
|
|
* is unspecified.
|
|
*
|
|
* @note - This function is reentrant, doesn't use system resources
|
|
* and can be used from an interrupt context.
|
|
*/
|
|
PUBLIC IX_STATUS
|
|
ixAtmdAccTxDoneQueueSizeQuery (unsigned int *numberOfPdusPtr);
|
|
|
|
/**
|
|
*
|
|
* @ingroup IxAtmdAccCtrlAPI
|
|
*
|
|
* @fn ixAtmdAccTxDoneDispatcherRegister (unsigned int numberOfPdus,
|
|
IxAtmdAccTxDoneDispatcher notificationCallback)
|
|
*
|
|
* @brief Configure the Tx Done stream threshold value and register a
|
|
* callback to handle threshold notifications.
|
|
*
|
|
* This function sets the threshold level in term of number of pdus at
|
|
* which the supplied notification function should be called.
|
|
*
|
|
* The higher the threshold value is, the less events will be necessary
|
|
* to process transmitted buffers.
|
|
*
|
|
* Transmitted buffers recycling implementation is a sytem-wide mechanism
|
|
* and needs to be set prior any traffic is started. If this threshold
|
|
* mechanism is not used, the user is responsible for polling the
|
|
* transmitted buffers thanks to @a ixAtmdAccTxDoneDispatch() and
|
|
* @a ixAtmdAccTxDoneLevelQuery() functions.
|
|
*
|
|
* This function should be called during system initialisation outside
|
|
* an interrupt context
|
|
*
|
|
* @sa ixAtmdAccTxDoneDispatcherRegister
|
|
* @sa ixAtmdAccTxDoneDispatch
|
|
* @sa ixAtmdAccTxDoneLevelQuery
|
|
*
|
|
* @param numberOfPdus unsigned int [in] - The number of TxDone pdus which triggers the
|
|
* callback invocation This number has to be a power of 2, one of the
|
|
* values 0,1,2,4,8,16,32 ...
|
|
* The maximum value cannot be more than half of the txDone queue
|
|
* size (which can be retrieved using @a ixAtmdAccTxDoneQueueSizeQuery())
|
|
* @param notificationCallback @ref IxAtmdAccTxDoneDispatcher [in] - The function to invoke. (This
|
|
* parameter can be @a ixAtmdAccTxDoneDispatch()).This
|
|
* parameter ust not be a null pointer.
|
|
*
|
|
* @return @li IX_SUCCESS Successful call to ixAtmdAccTxDoneDispatcherRegister
|
|
* @return @li IX_FAIL error in the parameters:
|
|
*
|
|
* @note - The notificationCallback will be called exactly when the threshold level
|
|
* will increase from (numberOfPdus) to (numberOfPdus+1)
|
|
*
|
|
* @note - If there is no Tx traffic, there is no guarantee that TxDone Pdus will
|
|
* be released to the user (when txDone level is permanently under the threshold
|
|
* level. One of the preffered way to return resources to the user is to use
|
|
* a mix of txDone notifications, used together with a slow
|
|
* rate timer and an exclusion mechanism protecting from re-entrancy
|
|
*
|
|
* @note - The TxDone threshold will only hand back buffers when the threshold level is
|
|
* crossed. Setting this threshold to a great number reduce the interrupt rate
|
|
* and the cpu load, but also increase the number of outstanding mbufs and has
|
|
* a system wide impact when these mbufs are needed by other components.
|
|
*
|
|
*/
|
|
PUBLIC IX_STATUS ixAtmdAccTxDoneDispatcherRegister (unsigned int numberOfPdus,
|
|
IxAtmdAccTxDoneDispatcher notificationCallback);
|
|
|
|
/* ------------------------------------------------------
|
|
Part of the IxAtmdAcc interface related to Utopia config
|
|
------------------------------------------------------ */
|
|
|
|
/**
|
|
*
|
|
* @ingroup IxAtmdAccCtrlAPI
|
|
*
|
|
* @defgroup IxAtmdAccUtopiaCtrlAPI IXP400 ATM Driver Access (IxAtmdAcc) Utopia Control API
|
|
*
|
|
* @brief The public API for the IXP400 Atm Driver Control component
|
|
*
|
|
* IxAtmdAcc is the low level interface by which AAL PDU get
|
|
* transmitted to,and received from the Utopia bus
|
|
*
|
|
* This part is related to the UTOPIA configuration.
|
|
*
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
*
|
|
* @brief Utopia configuration
|
|
*
|
|
* This structure is used to set the Utopia parameters
|
|
* @li contains the values of Utopia registers, to be set during initialisation
|
|
* @li contains debug commands for NPE, to be used during development steps
|
|
*
|
|
* @note - the exact description of all parameters is done in the Utopia reference
|
|
* documents.
|
|
*
|
|
*/
|
|
typedef struct
|
|
{
|
|
/**
|
|
* @ingroup IxAtmdAccUtopiaCtrlAPI
|
|
* @struct UtTxConfig_
|
|
* @brief Utopia Tx Config Register
|
|
*/
|
|
struct UtTxConfig_
|
|
{
|
|
|
|
unsigned int reserved_1:1; /**< [31] These bits are always 0.*/
|
|
unsigned int txInterface:1; /**< [30] Utopia Transmit Interface. The following encoding
|
|
* is used to set the Utopia Transmit interface as ATM master
|
|
* or PHY slave:
|
|
* @li 1 - PHY
|
|
* @li 0 - ATM
|
|
*/
|
|
unsigned int txMode:1; /**< [29] Utopia Transmit Mode. The following encoding is used
|
|
* to set the Utopia Transmit mode to SPHY or MPHY:
|
|
* @li 1 - SPHY
|
|
* @li 0 - MPHY
|
|
*/
|
|
unsigned int txOctet:1; /**< [28] Utopia Transmit cell transfer protocol. Used to set
|
|
* the Utopia cell transfer protocol to Octet-level handshaking.
|
|
* Note this is only applicable in SPHY mode.
|
|
* @li 1 - Octet-handshaking enabled
|
|
* @li 0 - Cell-handshaking enabled
|
|
*/
|
|
unsigned int txParity:1; /**< [27] Utopia Transmit parity enabled when set. TxEvenParity
|
|
* defines the parity format odd/even.
|
|
* @li 1 - Enable Parity generation.
|
|
* @li 0 - ut_op_prty held low.
|
|
*/
|
|
unsigned int txEvenParity:1; /**< [26] Utopia Transmit Parity Mode
|
|
* @li 1 - Even Parity Generated.
|
|
* @li 0 - Odd Parity Generated.
|
|
*/
|
|
unsigned int txHEC:1; /**< [25] Header Error Check Insertion Mode. Specifies if the transmit
|
|
* cell header check byte is calculated and inserted when set.
|
|
* @li 1 - Generate HEC.
|
|
* @li 0 - Disable HEC generation.
|
|
*/
|
|
unsigned int txCOSET:1; /**< [24] If enabled the HEC is Exclusive-OR'ed with the value 0x55 before
|
|
* being presented on the Utopia bus.
|
|
* @li 1 - Enable HEC ExOR with value 0x55
|
|
* @li 0 - Use generated HEC value.
|
|
*/
|
|
|
|
unsigned int reserved_2:1; /**< [23] These bits are always 0
|
|
*/
|
|
unsigned int txCellSize:7; /**< [22:16] Transmit expected cell size. Configures the cell size
|
|
* for the transmit module: Values between 52-64 are valid.
|
|
*/
|
|
unsigned int reserved_3:3; /**< [15:13] These bits are always 0 */
|
|
unsigned int txAddrRange:5; /**< [12:8] When configured as an ATM master in MPHY mode this
|
|
* register specifies the upper limit of the PHY polling logical
|
|
* range. The number of active PHYs are TxAddrRange + 1.
|
|
*/
|
|
unsigned int reserved_4:3; /**< [7:5] These bits are always 0 */
|
|
unsigned int txPHYAddr:5; /**< [4:0] When configured as a slave in an MPHY system this register
|
|
* specifies the physical address of the PHY.
|
|
*/
|
|
}
|
|
|
|
utTxConfig; /**< Tx config Utopia register */
|
|
|
|
/**
|
|
* @ingroup IxAtmdAccUtopiaCtrlAPI
|
|
* @struct UtTxStatsConfig_
|
|
* @brief Utopia Tx stats Register
|
|
*/
|
|
struct UtTxStatsConfig_
|
|
{
|
|
|
|
unsigned int vpi:12; /**< [31:20] ATM VPI [11:0] OR GFC [3:0] and VPI [7:0]
|
|
@li Note: if VCStatsTxGFC is set to 0 the GFC field is ignored in test. */
|
|
|
|
unsigned int vci:16; /**< [19:4] ATM VCI [15:0] or PHY Address[4] */
|
|
|
|
unsigned int pti:3; /**< [3:1] ATM PTI [2:0] or PHY Address[3:1]
|
|
@li Note: if VCStatsTxPTI is set to 0 the PTI field is ignored in test.
|
|
@li Note: if VCStatsTxEnb is set to 0 only the transmit PHY port
|
|
address as defined by this register is used for ATM statistics [4:0]. */
|
|
|
|
unsigned int clp:1; /**< [0] ATM CLP or PHY Address [0]
|
|
@li Note: if VCStatsTxCLP is set to 0 the CLP field is ignored in test.
|
|
@li Note: if VCStatsTxEnb is set to 0 only the transmit PHY port
|
|
address as defined by this register is used for ATM statistics [4:0]. */
|
|
}
|
|
|
|
utTxStatsConfig; /**< Tx stats config Utopia register */
|
|
|
|
/**
|
|
* @ingroup IxAtmdAccUtopiaCtrlAPI
|
|
* @struct UtTxDefineIdle_
|
|
* @brief Utopia Tx idle cells Register
|
|
*/
|
|
struct UtTxDefineIdle_
|
|
{
|
|
|
|
unsigned int vpi:12; /**< [31:20] ATM VPI [11:0] OR GFC [3:0] and VPI [7:0]
|
|
@li Note: if VCIdleTxGFC is set to 0 the GFC field is ignored in test. */
|
|
|
|
unsigned int vci:16; /**< [19:4] ATM VCI [15:0] */
|
|
|
|
unsigned int pti:3; /**< [3:1] ATM PTI PTI [2:0]
|
|
@li Note: if VCIdleTxPTI is set to 0 the PTI field is ignored in test.*/
|
|
|
|
unsigned int clp:1; /**< [0] ATM CLP [0]
|
|
@li Note: if VCIdleTxCLP is set to 0 the CLP field is ignored in test.*/
|
|
}
|
|
|
|
utTxDefineIdle; /**< Tx idle cell config Utopia register */
|
|
|
|
/**
|
|
* @ingroup IxAtmdAccUtopiaCtrlAPI
|
|
* @struct UtTxEnableFields_
|
|
* @brief Utopia Tx ienable fields Register
|
|
*/
|
|
struct UtTxEnableFields_
|
|
{
|
|
|
|
unsigned int defineTxIdleGFC:1; /**< [31] This register is used to include or exclude the GFC
|
|
field of the ATM header when testing for Idle cells.
|
|
@li 1 - GFC field is valid.
|
|
@li 0 - GFC field ignored.*/
|
|
|
|
unsigned int defineTxIdlePTI:1; /**< [30] This register is used to include or exclude the PTI
|
|
field of the ATM header when testing for Idle cells.
|
|
@li 1 - PTI field is valid
|
|
@li 0 - PTI field ignored.*/
|
|
|
|
unsigned int defineTxIdleCLP:1; /**< [29] This register is used to include or
|
|
exclude the CLP field of the ATM header when testing for Idle cells.
|
|
@li 1 - CLP field is valid.
|
|
@li 0 - CLP field ignored. */
|
|
|
|
unsigned int phyStatsTxEnb:1; /**< [28] This register is used to enable or disable ATM
|
|
statistics gathering based on the specified PHY address as defined
|
|
in TxStatsConfig register.
|
|
@li 1 - Enable statistics for specified transmit PHY address.
|
|
@li 0 - Disable statistics for specified transmit PHY address. */
|
|
|
|
unsigned int vcStatsTxEnb:1; /**< [27] This register is used to change the ATM
|
|
statistics-gathering mode from the specified logical PHY address
|
|
to a specific VPI/VCI address.
|
|
@li 1 - Enable statistics for specified VPI/VCI address.
|
|
@li 0 - Disable statistics for specified VPI/VCI address */
|
|
|
|
unsigned int vcStatsTxGFC:1; /**< [26] This register is used to include or exclude the GFC
|
|
field of the ATM header when ATM VPI/VCI statistics are enabled.
|
|
GFC is only available at the UNI and uses the first 4-bits of
|
|
the VPI field.
|
|
@li 1 - GFC field is valid
|
|
@li 0 - GFC field ignored.*/
|
|
|
|
unsigned int vcStatsTxPTI:1; /**< [25] This register is used to include or exclude the PTI
|
|
field of the ATM header when ATM VPI/VCI statistics are enabled.
|
|
@li 1 - PTI field is valid
|
|
@li 0 - PTI field ignored.*/
|
|
|
|
unsigned int vcStatsTxCLP:1; /**< [24] This register is used to include or exclude the CLP
|
|
field of the ATM header when ATM VPI/VCI statistics are enabled.
|
|
@li 1 - CLP field is valid
|
|
@li 0 - CLP field ignored. */
|
|
|
|
unsigned int reserved_1:3; /**< [23-21] These bits are always 0 */
|
|
|
|
unsigned int txPollStsInt:1; /**< [20] Enable the assertion of the ucp_tx_poll_sts condition
|
|
where there is a change in polling status.
|
|
@li 1 - ucp_tx_poll_sts asserted whenever there is a change in status
|
|
@li 0 - ucp_tx_poll_sts asserted if ANY transmit PHY is available
|
|
*/
|
|
unsigned int txCellOvrInt:1; /**< [19] Enable TxCellCount overflow CBI Transmit Status condition
|
|
assertion.
|
|
@li 1 - If TxCellCountOvr is set assert the Transmit Status Condition.
|
|
@li 0 - No CBI Transmit Status condition assertion */
|
|
|
|
unsigned int txIdleCellOvrInt:1; /**< [18] Enable TxIdleCellCount overflow Transmit Status Condition
|
|
@li 1 - If TxIdleCellCountOvr is set assert the Transmit Status Condition
|
|
@li 0 - No CBI Transmit Status condition assertion..*/
|
|
|
|
unsigned int enbIdleCellCnt:1; /**< [17] Enable Transmit Idle Cell Count.
|
|
@li 1 - Enable count of Idle cells transmitted.
|
|
@li 0 - No count is maintained. */
|
|
|
|
unsigned int enbTxCellCnt:1; /**< [16] Enable Transmit Valid Cell Count of non-idle/non-error cells
|
|
@li 1 - Enable count of valid cells transmitted- non-idle/non-error
|
|
@li 0 - No count is maintained.*/
|
|
|
|
unsigned int reserved_2:16; /**< [15:0] These bits are always 0 */
|
|
} utTxEnableFields; /**< Tx enable Utopia register */
|
|
|
|
/**
|
|
* @ingroup IxAtmdAccUtopiaCtrlAPI
|
|
* @struct UtTxTransTable0_
|
|
* @brief Utopia Tx translation table Register
|
|
*/
|
|
struct UtTxTransTable0_
|
|
{
|
|
|
|
unsigned int phy0:5; /**< [31-27] Tx Mapping value of logical phy 0 */
|
|
|
|
unsigned int phy1:5; /**< [26-22] Tx Mapping value of logical phy 1 */
|
|
|
|
unsigned int phy2:5; /**< [21-17] Tx Mapping value of logical phy 2 */
|
|
|
|
unsigned int reserved_1:1; /**< [16] These bits are always 0.*/
|
|
|
|
unsigned int phy3:5; /**< [15-11] Tx Mapping value of logical phy 3 */
|
|
|
|
unsigned int phy4:5; /**< [10-6] Tx Mapping value of logical phy 4 */
|
|
|
|
unsigned int phy5:5; /**< [5-1] Tx Mapping value of logical phy 5 */
|
|
|
|
unsigned int reserved_2:1; /**< [0] These bits are always 0 */
|
|
} utTxTransTable0; /**< Tx translation table */
|
|
|
|
/**
|
|
* @ingroup IxAtmdAccUtopiaCtrlAPI
|
|
* @struct UtTxTransTable1_
|
|
* @brief Utopia Tx translation table Register
|
|
*/
|
|
struct UtTxTransTable1_
|
|
{
|
|
|
|
unsigned int phy6:5; /**< [31-27] Tx Mapping value of logical phy 6 */
|
|
|
|
unsigned int phy7:5; /**< [26-22] Tx Mapping value of logical phy 7 */
|
|
|
|
unsigned int phy8:5; /**< [21-17] Tx Mapping value of logical phy 8 */
|
|
|
|
unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */
|
|
|
|
unsigned int phy9:5; /**< [15-11] Tx Mapping value of logical phy 3 */
|
|
|
|
unsigned int phy10:5; /**< [10-6] Tx Mapping value of logical phy 4 */
|
|
|
|
unsigned int phy11:5; /**< [5-1] Tx Mapping value of logical phy 5 */
|
|
|
|
unsigned int reserved_2:1; /**< [0] These bits are always 0 */
|
|
} utTxTransTable1; /**< Tx translation table */
|
|
|
|
/**
|
|
* @ingroup IxAtmdAccUtopiaCtrlAPI
|
|
* @struct UtTxTransTable2_
|
|
* @brief Utopia Tx translation table Register
|
|
*/
|
|
struct UtTxTransTable2_
|
|
{
|
|
|
|
unsigned int phy12:5; /**< [31-27] Tx Mapping value of logical phy 6 */
|
|
|
|
unsigned int phy13:5; /**< [26-22] Tx Mapping value of logical phy 7 */
|
|
|
|
unsigned int phy14:5; /**< [21-17] Tx Mapping value of logical phy 8 */
|
|
|
|
unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */
|
|
|
|
unsigned int phy15:5; /**< [15-11] Tx Mapping value of logical phy 3 */
|
|
|
|
unsigned int phy16:5; /**< [10-6] Tx Mapping value of logical phy 4 */
|
|
|
|
unsigned int phy17:5; /**< [5-1] Tx Mapping value of logical phy 5 */
|
|
|
|
unsigned int reserved_2:1; /**< [0] These bits are always 0 */
|
|
} utTxTransTable2; /**< Tx translation table */
|
|
|
|
/**
|
|
* @ingroup IxAtmdAccUtopiaCtrlAPI
|
|
* @struct UtTxTransTable3_
|
|
* @brief Utopia Tx translation table Register
|
|
*/
|
|
struct UtTxTransTable3_
|
|
{
|
|
|
|
unsigned int phy18:5; /**< [31-27] Tx Mapping value of logical phy 6 */
|
|
|
|
unsigned int phy19:5; /**< [26-22] Tx Mapping value of logical phy 7 */
|
|
|
|
unsigned int phy20:5; /**< [21-17] Tx Mapping value of logical phy 8 */
|
|
|
|
unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */
|
|
|
|
unsigned int phy21:5; /**< [15-11] Tx Mapping value of logical phy 3 */
|
|
|
|
unsigned int phy22:5; /**< [10-6] Tx Mapping value of logical phy 4 */
|
|
|
|
unsigned int phy23:5; /**< [5-1] Tx Mapping value of logical phy 5 */
|
|
|
|
unsigned int reserved_2:1; /**< [0] These bits are always 0 */
|
|
} utTxTransTable3; /**< Tx translation table */
|
|
|
|
/**
|
|
* @ingroup IxAtmdAccUtopiaCtrlAPI
|
|
* @struct UtTxTransTable4_
|
|
* @brief Utopia Tx translation table Register
|
|
*/
|
|
struct UtTxTransTable4_
|
|
{
|
|
|
|
unsigned int phy24:5; /**< [31-27] Tx Mapping value of logical phy 6 */
|
|
|
|
unsigned int phy25:5; /**< [26-22] Tx Mapping value of logical phy 7 */
|
|
|
|
unsigned int phy26:5; /**< [21-17] Tx Mapping value of logical phy 8 */
|
|
|
|
unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */
|
|
|
|
unsigned int phy27:5; /**< [15-11] Tx Mapping value of logical phy 3 */
|
|
|
|
unsigned int phy28:5; /**< [10-6] Tx Mapping value of logical phy 4 */
|
|
|
|
unsigned int phy29:5; /**< [5-1] Tx Mapping value of logical phy 5 */
|
|
|
|
unsigned int reserved_2:1; /**< [0] These bits are always 0 */
|
|
} utTxTransTable4; /**< Tx translation table */
|
|
|
|
/**
|
|
* @ingroup IxAtmdAccUtopiaCtrlAPI
|
|
* @struct UtTxTransTable5_
|
|
* @brief Utopia Tx translation table Register
|
|
*/
|
|
struct UtTxTransTable5_
|
|
{
|
|
|
|
unsigned int phy30:5; /**< [31-27] Tx Mapping value of logical phy 6 */
|
|
|
|
unsigned int reserved_1:27; /**< [26-0] These bits are always 0 */
|
|
|
|
} utTxTransTable5; /**< Tx translation table */
|
|
|
|
/**
|
|
* @ingroup IxAtmdAccUtopiaCtrlAPI
|
|
* @struct UtRxConfig_
|
|
* @brief Utopia Rx config Register
|
|
*/
|
|
struct UtRxConfig_
|
|
{
|
|
|
|
unsigned int rxInterface:1; /**< [31] Utopia Receive Interface. The following encoding is used
|
|
to set the Utopia Receive interface as ATM master or PHY slave:
|
|
@li 1 - PHY
|
|
@li 0 - ATM */
|
|
|
|
unsigned int rxMode:1; /**< [30] Utopia Receive Mode. The following encoding is used to set
|
|
the Utopia Receive mode to SPHY or MPHY:
|
|
@li 1 - SPHY
|
|
@li 0 - MPHY */
|
|
|
|
unsigned int rxOctet:1; /**< [29] Utopia Receive cell transfer protocol. Used to set the Utopia
|
|
cell transfer protocol to Octet-level handshaking. Note this is only
|
|
applicable in SPHY mode.
|
|
@li 1 - Octet-handshaking enabled
|
|
@li 0 - Cell-handshaking enabled */
|
|
|
|
unsigned int rxParity:1; /**< [28] Utopia Receive Parity Checking enable.
|
|
@li 1 - Parity checking enabled
|
|
@li 0 - Parity checking disabled */
|
|
|
|
unsigned int rxEvenParity:1;/**< [27] Utopia Receive Parity Mode
|
|
@li 1 - Check for Even Parity
|
|
@li 0 - Check for Odd Parity.*/
|
|
|
|
unsigned int rxHEC:1; /**< [26] RxHEC Header Error Check Mode. Enables/disables cell header
|
|
error checking on the received cell header.
|
|
@li 1 - HEC checking enabled
|
|
@li 0 - HEC checking disabled */
|
|
|
|
unsigned int rxCOSET:1; /**< [25] If enabled the HEC is Exclusive-OR'ed with the value 0x55
|
|
before being tested with the received HEC.
|
|
@li 1 - Enable HEC ExOR with value 0x55.
|
|
@li 0 - Use generated HEC value.*/
|
|
|
|
unsigned int rxHECpass:1; /**< [24] Specifies if the incoming cell HEC byte should be transferred
|
|
after optional processing to the NPE2 Coprocessor Bus Interface or
|
|
if it should be discarded.
|
|
@li 1 - HEC maintained 53-byte/UDC cell sent to NPE2.
|
|
@li 0 - HEC discarded 52-byte/UDC cell sent to NPE2 coprocessor.*/
|
|
|
|
unsigned int reserved_1:1; /**< [23] These bits are always 0 */
|
|
|
|
unsigned int rxCellSize:7; /**< [22:16] Receive cell size. Configures the receive cell size.
|
|
Values between 52-64 are valid */
|
|
|
|
unsigned int rxHashEnbGFC:1; /**< [15] Specifies if the VPI field [11:8]/GFC field should be
|
|
included in the Hash data input or if the bits should be padded
|
|
with 1'b0.
|
|
@li 1 - VPI [11:8]/GFC field valid and used in Hash residue calculation.
|
|
@li 0 - VPI [11:8]/GFC field padded with 1'b0 */
|
|
|
|
unsigned int rxPreHash:1; /**< [14] Enable Pre-hash value generation. Specifies if the
|
|
incoming cell data should be pre-hashed to allow VPI/VCI header look-up
|
|
in a hash table.
|
|
@li 1 - Pre-hashing enabled
|
|
@li 0 - Pre-hashing disabled */
|
|
|
|
unsigned int reserved_2:1; /**< [13] These bits are always 0 */
|
|
|
|
unsigned int rxAddrRange:5; /**< [12:8] In ATM master, MPHY mode,
|
|
* this register specifies the upper
|
|
* limit of the PHY polling logical range. The number of active PHYs are
|
|
* RxAddrRange + 1.
|
|
*/
|
|
unsigned int reserved_3:3; /**< [7-5] These bits are always 0 .*/
|
|
unsigned int rxPHYAddr:5; /**< [4:0] When configured as a slave in an MPHY system this register
|
|
* specifies the physical address of the PHY.
|
|
*/
|
|
} utRxConfig; /**< Rx config Utopia register */
|
|
|
|
/**
|
|
* @ingroup IxAtmdAccUtopiaCtrlAPI
|
|
* @struct UtRxStatsConfig_
|
|
* @brief Utopia Rx stats config Register
|
|
*/
|
|
struct UtRxStatsConfig_
|
|
{
|
|
|
|
unsigned int vpi:12; /**< [31:20] ATM VPI VPI [11:0] OR GFC [3:0] and VPI [7:0]
|
|
@li Note: if VCStatsRxGFC is set to 0 the GFC field is ignored in test. */
|
|
|
|
unsigned int vci:16; /**< [19:4] VCI [15:0] or PHY Address [4] */
|
|
|
|
unsigned int pti:3; /**< [3:1] PTI [2:0] or or PHY Address [3:1]
|
|
@li Note: if VCStatsRxPTI is set to 0 the PTI field is ignored in test.
|
|
@li Note: if VCStatsRxEnb is set to 0 only the PHY port address is used
|
|
for statistics gathering.. */
|
|
|
|
unsigned int clp:1; /**< [0] CLP [0] or PHY Address [0]
|
|
@li Note: if VCStatsRxCLP is set to 0 the CLP field is ignored in test.
|
|
@li Note: if VCStatsRxEnb is set to 0 only the PHY port address is used
|
|
for statistics gathering.. */
|
|
} utRxStatsConfig; /**< Rx stats config Utopia register */
|
|
|
|
/**
|
|
* @ingroup IxAtmdAccUtopiaCtrlAPI
|
|
* @struct UtRxDefineIdle_
|
|
* @brief Utopia Rx idle cells config Register
|
|
*/
|
|
struct UtRxDefineIdle_
|
|
{
|
|
|
|
unsigned int vpi:12; /**< [31:20] ATM VPI [11:0] OR GFC [3:0] and VPI [7:0]
|
|
@li Note: if VCIdleRxGFC is set to 0 the GFC field is ignored in test. */
|
|
|
|
unsigned int vci:16; /**< [19:4] ATM VCI [15:0] */
|
|
|
|
unsigned int pti:3; /**< [3:1] ATM PTI PTI [2:0]
|
|
@li Note: if VCIdleRxPTI is set to 0 the PTI field is ignored in test.*/
|
|
|
|
unsigned int clp:1; /**< [0] ATM CLP [0]
|
|
@li Note: if VCIdleRxCLP is set to 0 the CLP field is ignored in test.*/
|
|
} utRxDefineIdle; /**< Rx idle cell config Utopia register */
|
|
|
|
/**
|
|
* @ingroup IxAtmdAccUtopiaCtrlAPI
|
|
* @struct UtRxEnableFields_
|
|
* @brief Utopia Rx enable Register
|
|
*/
|
|
struct UtRxEnableFields_
|
|
{
|
|
|
|
unsigned int defineRxIdleGFC:1;/**< [31] This register is used to include or exclude the GFC
|
|
field of the ATM header when testing for Idle cells.
|
|
@li 1 - GFC field is valid.
|
|
@li 0 - GFC field ignored.*/
|
|
|
|
unsigned int defineRxIdlePTI:1;/**< [30] This register is used to include or exclude the PTI
|
|
field of the ATM header when testing for Idle cells.
|
|
@li 1 - PTI field is valid.
|
|
@li 0 - PTI field ignored.*/
|
|
|
|
unsigned int defineRxIdleCLP:1;/**< [29] This register is used to include or exclude the CLP
|
|
field of the ATM header when testing for Idle cells.
|
|
@li 1 - CLP field is valid.
|
|
@li 0 - CLP field ignored.*/
|
|
|
|
unsigned int phyStatsRxEnb:1;/**< [28] This register is used to enable or disable ATM statistics
|
|
gathering based on the specified PHY address as defined in RxStatsConfig
|
|
register.
|
|
@li 1 - Enable statistics for specified receive PHY address.
|
|
@li 0 - Disable statistics for specified receive PHY address.*/
|
|
|
|
unsigned int vcStatsRxEnb:1;/**< [27] This register is used to enable or disable ATM statistics
|
|
gathering based on a specific VPI/VCI address.
|
|
@li 1 - Enable statistics for specified VPI/VCI address.
|
|
@li 0 - Disable statistics for specified VPI/VCI address.*/
|
|
|
|
unsigned int vcStatsRxGFC:1;/**< [26] This register is used to include or exclude the GFC field
|
|
of the ATM header when ATM VPI/VCI statistics are enabled. GFC is only
|
|
available at the UNI and uses the first 4-bits of the VPI field.
|
|
@li 1 - GFC field is valid.
|
|
@li 0 - GFC field ignored. */
|
|
|
|
unsigned int vcStatsRxPTI:1;/**< [25] This register is used to include or exclude the PTI field
|
|
of the ATM header when ATM VPI/VCI statistics are enabled.
|
|
@li 1 - PTI field is valid.
|
|
@li 0 - PTI field ignored.*/
|
|
|
|
unsigned int vcStatsRxCLP:1;/**< [24] This register is used to include or exclude the CLP field
|
|
of the ATM header when ATM VPI/VCI statistics are enabled.
|
|
@li 1 - CLP field is valid.
|
|
@li 0 - CLP field ignored. */
|
|
|
|
unsigned int discardHecErr:1;/**< [23] Discard cells with an invalid HEC.
|
|
@li 1 - Discard cells with HEC errors
|
|
@li 0 - Cells with HEC errors are passed */
|
|
|
|
unsigned int discardParErr:1;/**< [22] Discard cells containing parity errors.
|
|
@li 1 - Discard cells with parity errors
|
|
@li 0 - Cells with parity errors are passed */
|
|
|
|
unsigned int discardIdle:1; /**< [21] Discard Idle Cells based on DefineIdle register values
|
|
@li 1 - Discard IDLE cells
|
|
@li 0 - IDLE cells passed */
|
|
|
|
unsigned int enbHecErrCnt:1;/**< [20] Enable Receive HEC Error Count.
|
|
@li 1 - Enable count of received cells containing HEC errors
|
|
@li 0 - No count is maintained. */
|
|
|
|
unsigned int enbParErrCnt:1;/**< [19] Enable Parity Error Count
|
|
@li 1 - Enable count of received cells containing Parity errors
|
|
@li 0 - No count is maintained. */
|
|
|
|
unsigned int enbIdleCellCnt:1;/**< [18] Enable Receive Idle Cell Count.
|
|
@li 1 - Enable count of Idle cells received.
|
|
@li 0 - No count is maintained.*/
|
|
|
|
unsigned int enbSizeErrCnt:1;/**< [17] Enable Receive Size Error Count.
|
|
@li 1 - Enable count of received cells of incorrect size
|
|
@li 0 - No count is maintained. */
|
|
|
|
unsigned int enbRxCellCnt:1;/**< [16] Enable Receive Valid Cell Count of non-idle/non-error cells.
|
|
@li 1 - Enable count of valid cells received - non-idle/non-error
|
|
@li 0 - No count is maintained. */
|
|
|
|
unsigned int reserved_1:3; /**< [15:13] These bits are always 0 */
|
|
|
|
unsigned int rxCellOvrInt:1; /**< [12] Enable CBI Utopia Receive Status Condition if the RxCellCount
|
|
register overflows.
|
|
@li 1 - CBI Receive Status asserted.
|
|
@li 0 - No CBI Receive Status asserted.*/
|
|
|
|
unsigned int invalidHecOvrInt:1; /**< [11] Enable CBI Receive Status Condition if the InvalidHecCount
|
|
register overflows.
|
|
@li 1 - CBI Receive Condition asserted.
|
|
@li 0 - No CBI Receive Condition asserted */
|
|
|
|
unsigned int invalidParOvrInt:1; /**< [10] Enable CBI Receive Status Condition if the InvalidParCount
|
|
register overflows
|
|
@li 1 - CBI Receive Condition asserted.
|
|
@li 0 - No CBI Receive Condition asserted */
|
|
|
|
unsigned int invalidSizeOvrInt:1; /**< [9] Enable CBI Receive Status Condition if the InvalidSizeCount
|
|
register overflows.
|
|
@li 1 - CBI Receive Status Condition asserted.
|
|
@li 0 - No CBI Receive Status asserted */
|
|
|
|
unsigned int rxIdleOvrInt:1; /**< [8] Enable CBI Receive Status Condition if the RxIdleCount overflows.
|
|
@li 1 - CBI Receive Condition asserted.
|
|
@li 0 - No CBI Receive Condition asserted */
|
|
|
|
unsigned int reserved_2:3; /**< [7:5] These bits are always 0 */
|
|
|
|
unsigned int rxAddrMask:5; /**< [4:0] This register is used as a mask to allow the user to increase
|
|
the PHY receive address range. The register should be programmed with
|
|
the address-range limit, i.e. if set to 0x3 the address range increases
|
|
to a maximum of 4 addresses. */
|
|
} utRxEnableFields; /**< Rx enable Utopia register */
|
|
|
|
/**
|
|
* @ingroup IxAtmdAccUtopiaCtrlAPI
|
|
* @struct UtRxTransTable0_
|
|
* @brief Utopia Rx translation table Register
|
|
*/
|
|
struct UtRxTransTable0_
|
|
{
|
|
|
|
unsigned int phy0:5; /**< [31-27] Rx Mapping value of logical phy 0 */
|
|
|
|
unsigned int phy1:5; /**< [26-22] Rx Mapping value of logical phy 1 */
|
|
|
|
unsigned int phy2:5; /**< [21-17] Rx Mapping value of logical phy 2 */
|
|
|
|
unsigned int reserved_1:1; /**< [16] These bits are always 0 */
|
|
|
|
unsigned int phy3:5; /**< [15-11] Rx Mapping value of logical phy 3 */
|
|
|
|
unsigned int phy4:5; /**< [10-6] Rx Mapping value of logical phy 4 */
|
|
|
|
unsigned int phy5:5; /**< [5-1] Rx Mapping value of logical phy 5 */
|
|
|
|
unsigned int reserved_2:1; /**< [0] These bits are always 0 */
|
|
}
|
|
|
|
utRxTransTable0; /**< Rx translation table */
|
|
|
|
/**
|
|
* @ingroup IxAtmdAccUtopiaCtrlAPI
|
|
* @struct UtRxTransTable1_
|
|
* @brief Utopia Rx translation table Register
|
|
*/
|
|
struct UtRxTransTable1_
|
|
{
|
|
|
|
unsigned int phy6:5; /**< [31-27] Rx Mapping value of logical phy 6 */
|
|
|
|
unsigned int phy7:5; /**< [26-22] Rx Mapping value of logical phy 7 */
|
|
|
|
unsigned int phy8:5; /**< [21-17] Rx Mapping value of logical phy 8 */
|
|
|
|
unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */
|
|
|
|
unsigned int phy9:5; /**< [15-11] Rx Mapping value of logical phy 3 */
|
|
|
|
unsigned int phy10:5; /**< [10-6] Rx Mapping value of logical phy 4 */
|
|
|
|
unsigned int phy11:5; /**< [5-1] Rx Mapping value of logical phy 5 */
|
|
|
|
unsigned int reserved_2:1; /**< [0] These bits are always 0 */
|
|
}
|
|
|
|
utRxTransTable1; /**< Rx translation table */
|
|
|
|
/**
|
|
* @ingroup IxAtmdAccUtopiaCtrlAPI
|
|
* @struct UtRxTransTable2_
|
|
* @brief Utopia Rx translation table Register
|
|
*/
|
|
struct UtRxTransTable2_
|
|
{
|
|
|
|
unsigned int phy12:5; /**< [31-27] Rx Mapping value of logical phy 6 */
|
|
|
|
unsigned int phy13:5; /**< [26-22] Rx Mapping value of logical phy 7 */
|
|
|
|
unsigned int phy14:5; /**< [21-17] Rx Mapping value of logical phy 8 */
|
|
|
|
unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */
|
|
|
|
unsigned int phy15:5; /**< [15-11] Rx Mapping value of logical phy 3 */
|
|
|
|
unsigned int phy16:5; /**< [10-6] Rx Mapping value of logical phy 4 */
|
|
|
|
unsigned int phy17:5; /**< [5-1] Rx Mapping value of logical phy 5 */
|
|
|
|
unsigned int reserved_2:1; /**< [0] These bits are always 0 */
|
|
} utRxTransTable2; /**< Rx translation table */
|
|
|
|
/**
|
|
* @ingroup IxAtmdAccUtopiaCtrlAPI
|
|
* @struct UtRxTransTable3_
|
|
* @brief Utopia Rx translation table Register
|
|
*/
|
|
struct UtRxTransTable3_
|
|
{
|
|
|
|
unsigned int phy18:5; /**< [31-27] Rx Mapping value of logical phy 6 */
|
|
|
|
unsigned int phy19:5; /**< [26-22] Rx Mapping value of logical phy 7 */
|
|
|
|
unsigned int phy20:5; /**< [21-17] Rx Mapping value of logical phy 8 */
|
|
|
|
unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */
|
|
|
|
unsigned int phy21:5; /**< [15-11] Rx Mapping value of logical phy 3 */
|
|
|
|
unsigned int phy22:5; /**< [10-6] Rx Mapping value of logical phy 4 */
|
|
|
|
unsigned int phy23:5; /**< [5-1] Rx Mapping value of logical phy 5 */
|
|
|
|
unsigned int reserved_2:1; /**< [0] These bits are always 0 */
|
|
} utRxTransTable3; /**< Rx translation table */
|
|
|
|
/**
|
|
* @ingroup IxAtmdAccUtopiaCtrlAPI
|
|
* @struct UtRxTransTable4_
|
|
* @brief Utopia Rx translation table Register
|
|
*/
|
|
struct UtRxTransTable4_
|
|
{
|
|
|
|
unsigned int phy24:5; /**< [31-27] Rx Mapping value of logical phy 6 */
|
|
|
|
unsigned int phy25:5; /**< [26-22] Rx Mapping value of logical phy 7 */
|
|
|
|
unsigned int phy26:5; /**< [21-17] Rx Mapping value of logical phy 8 */
|
|
|
|
unsigned int reserved_1:1; /**< [16-0] These bits are always 0 */
|
|
|
|
unsigned int phy27:5; /**< [15-11] Rx Mapping value of logical phy 3 */
|
|
|
|
unsigned int phy28:5; /**< [10-6] Rx Mapping value of logical phy 4 */
|
|
|
|
unsigned int phy29:5; /**< [5-1] Rx Mapping value of logical phy 5 */
|
|
|
|
unsigned int reserved_2:1; /**< [0] These bits are always 0 */
|
|
} utRxTransTable4; /**< Rx translation table */
|
|
|
|
/**
|
|
* @ingroup IxAtmdAccUtopiaCtrlAPI
|
|
* @struct UtRxTransTable5_
|
|
* @brief Utopia Rx translation table Register
|
|
*/
|
|
struct UtRxTransTable5_
|
|
{
|
|
|
|
unsigned int phy30:5; /**< [31-27] Rx Mapping value of logical phy 6 */
|
|
|
|
unsigned int reserved_1:27; /**< [26-0] These bits are always 0 */
|
|
|
|
} utRxTransTable5; /**< Rx translation table */
|
|
|
|
/**
|
|
* @ingroup IxAtmdAccUtopiaCtrlAPI
|
|
* @struct UtSysConfig_
|
|
* @brief NPE setup Register
|
|
*/
|
|
struct UtSysConfig_
|
|
{
|
|
|
|
unsigned int reserved_1:2; /**< [31-30] These bits are always 0 */
|
|
unsigned int txEnbFSM:1; /**< [29] Enables the operation ofthe Utopia Transmit FSM
|
|
* @li 1 - FSM enabled
|
|
* @li 0 - FSM inactive
|
|
*/
|
|
unsigned int rxEnbFSM:1; /**< [28] Enables the operation ofthe Utopia Revieve FSM
|
|
* @li 1 - FSM enabled
|
|
* @li 0 - FSM inactive
|
|
*/
|
|
unsigned int disablePins:1; /**< [27] Disable Utopia interface I/O pins forcing the signals to an
|
|
* inactive state. Note that this bit is set on reset and must be
|
|
* de-asserted
|
|
* @li 0 - Normal data transfer
|
|
* @li 1 - Utopia interface pins are forced inactive
|
|
*/
|
|
unsigned int tstLoop:1; /**< [26] Test Loop Back Enable.
|
|
* @li Note: For loop back to function RxMode and Tx Mode must both be set
|
|
* to single PHY mode.
|
|
* @li 0 - Loop back
|
|
* @li 1 - Normal operating mode
|
|
*/
|
|
|
|
unsigned int txReset:1; /**< [25] Resets the Utopia Coprocessor transmit module to a known state.
|
|
* @li Note: All transmit configuration and status registers will be reset
|
|
* to their reset values.
|
|
* @li 0 - Normal operating mode
|
|
* @li 1 - Reset transmit modules
|
|
*/
|
|
|
|
unsigned int rxReset:1; /**< [24] Resets the Utopia Coprocessor receive module to a known state.
|
|
* @li Note: All receive configuration and status registers will be reset
|
|
* to their reset values.
|
|
* @li 0 - Normal operating mode
|
|
* @li 1 - Reset receive modules
|
|
*/
|
|
|
|
unsigned int reserved_2:24; /**< [23-0] These bits are always 0 */
|
|
} utSysConfig; /**< NPE debug config */
|
|
|
|
}
|
|
IxAtmdAccUtopiaConfig;
|
|
|
|
/**
|
|
*
|
|
* @brief Utopia status
|
|
*
|
|
* This structure is used to set/get the Utopia status parameters
|
|
* @li contains debug cell counters, to be accessed during a read operation
|
|
*
|
|
* @note - the exact description of all parameters is done in the Utopia reference
|
|
* documents.
|
|
*
|
|
*/
|
|
typedef struct
|
|
{
|
|
|
|
unsigned int utTxCellCount; /**< count of cells transmitted */
|
|
|
|
unsigned int utTxIdleCellCount; /**< count of idle cells transmitted */
|
|
|
|
/**
|
|
* @ingroup IxAtmdAccUtopiaCtrlAPI
|
|
* @struct UtTxCellConditionStatus_
|
|
* @brief Utopia Tx Status Register
|
|
*/
|
|
struct UtTxCellConditionStatus_
|
|
{
|
|
|
|
unsigned int reserved_1:2; /**< [31:30] These bits are always 0 */
|
|
unsigned int txFIFO2Underflow:1; /**< [29] This bit is set if 64-byte
|
|
* Transmit FIFO2 indicates a FIFO underflow
|
|
* error condition.
|
|
*/
|
|
unsigned int txFIFO1Underflow:1; /**< [28] This bit is set if
|
|
* 64-byte Transmit FIFO1 indicates a FIFO
|
|
* underflow error condition.
|
|
*/
|
|
unsigned int txFIFO2Overflow:1; /**< [27] This bit is set if 64-byte
|
|
* Transmit FIFO2 indicates a FIFO overflow
|
|
* error condition.
|
|
*/
|
|
unsigned int txFIFO1Overflow:1; /**< [26] This bit is set if 64-byte
|
|
* Transmit FIFO1 indicates a FIFO overflow
|
|
* error condition.
|
|
*/
|
|
unsigned int txIdleCellCountOvr:1; /**< [25] This bit is set if the
|
|
* TxIdleCellCount register overflows.
|
|
*/
|
|
unsigned int txCellCountOvr:1; /**< [24] This bit is set if the
|
|
* TxCellCount register overflows
|
|
*/
|
|
unsigned int reserved_2:24; /**< [23:0] These bits are always 0 */
|
|
} utTxCellConditionStatus; /**< Tx cells condition status */
|
|
|
|
unsigned int utRxCellCount; /**< count of cell received */
|
|
unsigned int utRxIdleCellCount; /**< count of idle cell received */
|
|
unsigned int utRxInvalidHECount; /**< count of invalid cell
|
|
* received because of HEC errors
|
|
*/
|
|
unsigned int utRxInvalidParCount; /**< count of invalid cell received
|
|
* because of parity errors
|
|
*/
|
|
unsigned int utRxInvalidSizeCount; /**< count of invalid cell
|
|
* received because of cell
|
|
* size errors
|
|
*/
|
|
|
|
/**
|
|
* @ingroup IxAtmdAccUtopiaCtrlAPI
|
|
* @struct UtRxCellConditionStatus_
|
|
* @brief Utopia Rx Status Register
|
|
*/
|
|
struct UtRxCellConditionStatus_
|
|
{
|
|
|
|
unsigned int reserved_1:3; /**< [31:29] These bits are always 0.*/
|
|
unsigned int rxCellCountOvr:1; /**< [28] This bit is set if the RxCellCount register overflows. */
|
|
unsigned int invalidHecCountOvr:1; /**< [27] This bit is set if the InvalidHecCount register overflows.*/
|
|
unsigned int invalidParCountOvr:1; /**< [26] This bit is set if the InvalidParCount register overflows.*/
|
|
unsigned int invalidSizeCountOvr:1; /**< [25] This bit is set if the InvalidSizeCount register overflows.*/
|
|
unsigned int rxIdleCountOvr:1; /**< [24] This bit is set if the RxIdleCount register overflows.*/
|
|
unsigned int reserved_2:4; /**< [23:20] These bits are always 0 */
|
|
unsigned int rxFIFO2Underflow:1; /**< [19] This bit is set if 64-byte Receive FIFO2
|
|
* indicates a FIFO underflow error condition.
|
|
*/
|
|
unsigned int rxFIFO1Underflow:1; /**< [18] This bit is set if 64-byte Receive
|
|
* FIFO1 indicates a FIFO underflow error condition
|
|
. */
|
|
unsigned int rxFIFO2Overflow:1; /**< [17] This bit is set if 64-byte Receive FIFO2
|
|
* indicates a FIFO overflow error condition.
|
|
*/
|
|
unsigned int rxFIFO1Overflow:1; /**< [16] This bit is set if 64-byte Receive FIFO1
|
|
* indicates a FIFO overflow error condition.
|
|
*/
|
|
unsigned int reserved_3:16; /**< [15:0] These bits are always 0. */
|
|
} utRxCellConditionStatus; /**< Rx cells condition status */
|
|
|
|
} IxAtmdAccUtopiaStatus;
|
|
|
|
/**
|
|
* @} defgroup IxAtmdAccUtopiaCtrlAPI
|
|
*/
|
|
|
|
/**
|
|
*
|
|
* @ingroup IxAtmdAccCtrlAPI
|
|
*
|
|
* @fn ixAtmdAccUtopiaConfigSet (const IxAtmdAccUtopiaConfig *
|
|
ixAtmdAccUtopiaConfigPtr)
|
|
*
|
|
* @brief Send the configuration structure to the Utopia interface
|
|
*
|
|
* This function downloads the @a IxAtmdAccUtopiaConfig structure to
|
|
* the Utopia and has the following effects
|
|
* @li setup the Utopia interface
|
|
* @li initialise the NPE
|
|
* @li reset the Utopia cell counters and status registers to known values
|
|
*
|
|
* This action has to be done once at initialisation. A lock is preventing
|
|
* the concurrent use of @a ixAtmdAccUtopiaStatusGet() and
|
|
* @A ixAtmdAccUtopiaConfigSet()
|
|
*
|
|
* @param *ixAtmdAccNPEConfigPtr @ref IxAtmdAccUtopiaConfig [in] - pointer to a structure to download to
|
|
* Utopia. This parameter cannot be a null pointer.
|
|
*
|
|
* @return @li IX_SUCCESS successful download
|
|
* @return @li IX_FAIL error in the parameters, or configuration is not
|
|
* complete or failed
|
|
*
|
|
* @sa ixAtmdAccUtopiaStatusGet
|
|
*
|
|
*/
|
|
PUBLIC IX_STATUS ixAtmdAccUtopiaConfigSet (const IxAtmdAccUtopiaConfig *
|
|
ixAtmdAccUtopiaConfigPtr);
|
|
|
|
/**
|
|
*
|
|
* @ingroup IxAtmdAccCtrlAPI
|
|
*
|
|
* @fn ixAtmdAccUtopiaStatusGet (IxAtmdAccUtopiaStatus *
|
|
ixAtmdAccUtopiaStatus)
|
|
*
|
|
* @brief Get the Utopia interface configuration.
|
|
*
|
|
* This function reads the Utopia registers and the Cell counts
|
|
* and fills the @a IxAtmdAccUtopiaStatus structure
|
|
*
|
|
* A lock is preventing the concurrent
|
|
* use of @a ixAtmdAccUtopiaStatusGet() and @A ixAtmdAccUtopiaConfigSet()
|
|
*
|
|
* @param ixAtmdAccUtopiaStatus @ref IxAtmdAccUtopiaStatus [out] - pointer to structure to be updated from internal
|
|
* hardware counters. This parameter cannot be a NULL pointer.
|
|
*
|
|
* @return @li IX_SUCCESS successful read
|
|
* @return @li IX_FAIL error in the parameters null pointer, or
|
|
* configuration read is not complete or failed
|
|
*
|
|
* @sa ixAtmdAccUtopiaConfigSet
|
|
*
|
|
*/
|
|
PUBLIC IX_STATUS ixAtmdAccUtopiaStatusGet (IxAtmdAccUtopiaStatus *
|
|
ixAtmdAccUtopiaStatus);
|
|
|
|
/**
|
|
*
|
|
* @ingroup IxAtmdAcc
|
|
*
|
|
* @fn ixAtmdAccPortEnable (IxAtmLogicalPort port)
|
|
*
|
|
* @brief enable a PHY logical port
|
|
*
|
|
* This function enables the transmission over one port. It should be
|
|
* called before accessing any resource from this port and before the
|
|
* establishment of a VC.
|
|
*
|
|
* When a port is enabled, the cell transmission to the Utopia interface
|
|
* is started. If there is no traffic already running, idle cells are
|
|
* sent over the interface.
|
|
*
|
|
* This function can be called multiple times.
|
|
*
|
|
* @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1]
|
|
*
|
|
* @return @li IX_SUCCESS enable is complete
|
|
* @return @li IX_ATMDACC_WARNING port already enabled
|
|
* @return @li IX_FAIL enable failed, wrong parameter, or cannot
|
|
* initialise this port (the port is maybe already in use,
|
|
* or there is a hardware issue)
|
|
*
|
|
* @note - This function needs internal locks and should not be
|
|
* called from an interrupt context
|
|
*
|
|
* @sa ixAtmdAccPortDisable
|
|
*
|
|
*/
|
|
PUBLIC IX_STATUS ixAtmdAccPortEnable (IxAtmLogicalPort port);
|
|
|
|
/**
|
|
*
|
|
* @ingroup IxAtmdAccCtrlAPI
|
|
*
|
|
* @fn ixAtmdAccPortDisable (IxAtmLogicalPort port)
|
|
*
|
|
* @brief disable a PHY logical port
|
|
*
|
|
* This function disable the transmission over one port.
|
|
*
|
|
* When a port is disabled, the cell transmission to the Utopia interface
|
|
* is stopped.
|
|
*
|
|
* @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1]
|
|
*
|
|
* @return @li IX_SUCCESS disable is complete
|
|
* @return @li IX_ATMDACC_WARNING port already disabled
|
|
* @return @li IX_FAIL disable failed, wrong parameter .
|
|
*
|
|
* @note - This function needs internal locks and should not be called
|
|
* from an interrupt context
|
|
*
|
|
* @note - The response from hardware is done through the txDone mechanism
|
|
* to ensure the synchrnisation with tx resources. Therefore, the
|
|
* txDone mechanism needs to be serviced to make a PortDisable complete.
|
|
*
|
|
* @sa ixAtmdAccPortEnable
|
|
* @sa ixAtmdAccPortDisableComplete
|
|
* @sa ixAtmdAccTxDoneDispatch
|
|
*
|
|
*/
|
|
PUBLIC IX_STATUS ixAtmdAccPortDisable (IxAtmLogicalPort port);
|
|
|
|
/**
|
|
*
|
|
* @ingroup IxAtmdAccCtrlAPI
|
|
*
|
|
* @fn ixAtmdAccPortDisableComplete (IxAtmLogicalPort port)
|
|
*
|
|
* @brief disable a PHY logical port
|
|
*
|
|
* This function indicates if the port disable for a port has completed. This
|
|
* function will return true if the port has never been enabled.
|
|
*
|
|
* @param port @ref IxAtmLogicalPort [in] - logical PHY port [@a IX_UTOPIA_PORT_0 .. @a IX_UTOPIA_MAX_PORTS - 1]
|
|
*
|
|
* @return @li true disable is complete
|
|
* @return @li false disable failed, wrong parameter .
|
|
*
|
|
* @note - This function needs internal locks and should not be called
|
|
* from an interrupt context
|
|
*
|
|
* @sa ixAtmdAccPortEnable
|
|
* @sa ixAtmdAccPortDisable
|
|
*
|
|
*/
|
|
PUBLIC BOOL ixAtmdAccPortDisableComplete (IxAtmLogicalPort port);
|
|
|
|
#endif /* IXATMDACCCTRL_H */
|
|
|
|
/**
|
|
* @} defgroup IxAtmdAccCtrlAPI
|
|
*/
|
|
|
|
|