mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-28 15:41:40 +00:00
a94a4071d4
Replace instances of http://www.ti.com with https://www.ti.com Signed-off-by: Nishanth Menon <nm@ti.com>
298 lines
10 KiB
C
298 lines
10 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Texas Instruments GPMC Driver
|
|
*
|
|
* Copyright (C) 2021 Texas Instruments Incorporated - https://www.ti.com/
|
|
*/
|
|
|
|
/* GPMC register offsets */
|
|
#define GPMC_REVISION 0x00
|
|
#define GPMC_SYSCONFIG 0x10
|
|
#define GPMC_SYSSTATUS 0x14
|
|
#define GPMC_IRQSTATUS 0x18
|
|
#define GPMC_IRQENABLE 0x1c
|
|
#define GPMC_TIMEOUT_CONTROL 0x40
|
|
#define GPMC_ERR_ADDRESS 0x44
|
|
#define GPMC_ERR_TYPE 0x48
|
|
#define GPMC_CONFIG 0x50
|
|
#define GPMC_STATUS 0x54
|
|
#define GPMC_PREFETCH_CONFIG1 0x1e0
|
|
#define GPMC_PREFETCH_CONFIG2 0x1e4
|
|
#define GPMC_PREFETCH_CONTROL 0x1ec
|
|
#define GPMC_PREFETCH_STATUS 0x1f0
|
|
#define GPMC_ECC_CONFIG 0x1f4
|
|
#define GPMC_ECC_CONTROL 0x1f8
|
|
#define GPMC_ECC_SIZE_CONFIG 0x1fc
|
|
#define GPMC_ECC1_RESULT 0x200
|
|
#define GPMC_ECC_BCH_RESULT_0 0x240 /* not available on OMAP2 */
|
|
#define GPMC_ECC_BCH_RESULT_1 0x244 /* not available on OMAP2 */
|
|
#define GPMC_ECC_BCH_RESULT_2 0x248 /* not available on OMAP2 */
|
|
#define GPMC_ECC_BCH_RESULT_3 0x24c /* not available on OMAP2 */
|
|
#define GPMC_ECC_BCH_RESULT_4 0x300 /* not available on OMAP2 */
|
|
#define GPMC_ECC_BCH_RESULT_5 0x304 /* not available on OMAP2 */
|
|
#define GPMC_ECC_BCH_RESULT_6 0x308 /* not available on OMAP2 */
|
|
|
|
/* GPMC ECC control settings */
|
|
#define GPMC_ECC_CTRL_ECCCLEAR 0x100
|
|
#define GPMC_ECC_CTRL_ECCDISABLE 0x000
|
|
#define GPMC_ECC_CTRL_ECCREG1 0x001
|
|
#define GPMC_ECC_CTRL_ECCREG2 0x002
|
|
#define GPMC_ECC_CTRL_ECCREG3 0x003
|
|
#define GPMC_ECC_CTRL_ECCREG4 0x004
|
|
#define GPMC_ECC_CTRL_ECCREG5 0x005
|
|
#define GPMC_ECC_CTRL_ECCREG6 0x006
|
|
#define GPMC_ECC_CTRL_ECCREG7 0x007
|
|
#define GPMC_ECC_CTRL_ECCREG8 0x008
|
|
#define GPMC_ECC_CTRL_ECCREG9 0x009
|
|
|
|
#define GPMC_CONFIG_LIMITEDADDRESS BIT(1)
|
|
|
|
#define GPMC_STATUS_EMPTYWRITEBUFFERSTATUS BIT(0)
|
|
|
|
#define GPMC_CONFIG2_CSEXTRADELAY BIT(7)
|
|
#define GPMC_CONFIG3_ADVEXTRADELAY BIT(7)
|
|
#define GPMC_CONFIG4_OEEXTRADELAY BIT(7)
|
|
#define GPMC_CONFIG4_WEEXTRADELAY BIT(23)
|
|
#define GPMC_CONFIG6_CYCLE2CYCLEDIFFCSEN BIT(6)
|
|
#define GPMC_CONFIG6_CYCLE2CYCLESAMECSEN BIT(7)
|
|
|
|
#define GPMC_CS0_OFFSET 0x60
|
|
#define GPMC_CS_SIZE 0x30
|
|
#define GPMC_BCH_SIZE 0x10
|
|
|
|
/*
|
|
* The first 1MB of GPMC address space is typically mapped to
|
|
* the internal ROM. Never allocate the first page, to
|
|
* facilitate bug detection; even if we didn't boot from ROM.
|
|
* As GPMC minimum partition size is 16MB we can only start from
|
|
* there.
|
|
*/
|
|
#define GPMC_MEM_START 0x1000000
|
|
#define GPMC_MEM_END 0x3FFFFFFF
|
|
|
|
#define GPMC_CHUNK_SHIFT 24 /* 16 MB */
|
|
#define GPMC_SECTION_SHIFT 28 /* 128 MB */
|
|
|
|
#define CS_NUM_SHIFT 24
|
|
#define ENABLE_PREFETCH (0x1 << 7)
|
|
#define DMA_MPU_MODE 2
|
|
|
|
#define GPMC_REVISION_MAJOR(l) (((l) >> 4) & 0xf)
|
|
#define GPMC_REVISION_MINOR(l) ((l) & 0xf)
|
|
|
|
#define GPMC_HAS_WR_ACCESS 0x1
|
|
#define GPMC_HAS_WR_DATA_MUX_BUS 0x2
|
|
#define GPMC_HAS_MUX_AAD 0x4
|
|
|
|
#define GPMC_NR_WAITPINS 4
|
|
|
|
#define GPMC_CS_CONFIG1 0x00
|
|
#define GPMC_CS_CONFIG2 0x04
|
|
#define GPMC_CS_CONFIG3 0x08
|
|
#define GPMC_CS_CONFIG4 0x0c
|
|
#define GPMC_CS_CONFIG5 0x10
|
|
#define GPMC_CS_CONFIG6 0x14
|
|
#define GPMC_CS_CONFIG7 0x18
|
|
#define GPMC_CS_NAND_COMMAND 0x1c
|
|
#define GPMC_CS_NAND_ADDRESS 0x20
|
|
#define GPMC_CS_NAND_DATA 0x24
|
|
|
|
/* Control Commands */
|
|
#define GPMC_CONFIG_RDY_BSY 0x00000001
|
|
#define GPMC_CONFIG_DEV_SIZE 0x00000002
|
|
#define GPMC_CONFIG_DEV_TYPE 0x00000003
|
|
|
|
#define GPMC_CONFIG_WP 0x00000005
|
|
|
|
#define GPMC_CONFIG1_WRAPBURST_SUPP BIT(31)
|
|
#define GPMC_CONFIG1_READMULTIPLE_SUPP BIT(30)
|
|
#define GPMC_CONFIG1_READTYPE_ASYNC (0 << 29)
|
|
#define GPMC_CONFIG1_READTYPE_SYNC BIT(29)
|
|
#define GPMC_CONFIG1_WRITEMULTIPLE_SUPP BIT(28)
|
|
#define GPMC_CONFIG1_WRITETYPE_ASYNC (0 << 27)
|
|
#define GPMC_CONFIG1_WRITETYPE_SYNC BIT(27)
|
|
#define GPMC_CONFIG1_CLKACTIVATIONTIME(val) (((val) & 3) << 25)
|
|
/** CLKACTIVATIONTIME Max Ticks */
|
|
#define GPMC_CONFIG1_CLKACTIVATIONTIME_MAX 2
|
|
#define GPMC_CONFIG1_PAGE_LEN(val) (((val) & 3) << 23)
|
|
/** ATTACHEDDEVICEPAGELENGTH Max Value */
|
|
#define GPMC_CONFIG1_ATTACHEDDEVICEPAGELENGTH_MAX 2
|
|
#define GPMC_CONFIG1_WAIT_READ_MON BIT(22)
|
|
#define GPMC_CONFIG1_WAIT_WRITE_MON BIT(21)
|
|
#define GPMC_CONFIG1_WAIT_MON_TIME(val) (((val) & 3) << 18)
|
|
/** WAITMONITORINGTIME Max Ticks */
|
|
#define GPMC_CONFIG1_WAITMONITORINGTIME_MAX 2
|
|
#define GPMC_CONFIG1_WAIT_PIN_SEL(val) (((val) & 3) << 16)
|
|
#define GPMC_CONFIG1_DEVICESIZE(val) (((val) & 3) << 12)
|
|
#define GPMC_CONFIG1_DEVICESIZE_16 GPMC_CONFIG1_DEVICESIZE(1)
|
|
/** DEVICESIZE Max Value */
|
|
#define GPMC_CONFIG1_DEVICESIZE_MAX 1
|
|
#define GPMC_CONFIG1_DEVICETYPE(val) (((val) & 3) << 10)
|
|
#define GPMC_CONFIG1_DEVICETYPE_NOR GPMC_CONFIG1_DEVICETYPE(0)
|
|
#define GPMC_CONFIG1_MUXTYPE(val) (((val) & 3) << 8)
|
|
#define GPMC_CONFIG1_TIME_PARA_GRAN BIT(4)
|
|
#define GPMC_CONFIG1_FCLK_DIV(val) ((val) & 3)
|
|
#define GPMC_CONFIG1_FCLK_DIV2 (GPMC_CONFIG1_FCLK_DIV(1))
|
|
#define GPMC_CONFIG1_FCLK_DIV3 (GPMC_CONFIG1_FCLK_DIV(2))
|
|
#define GPMC_CONFIG1_FCLK_DIV4 (GPMC_CONFIG1_FCLK_DIV(3))
|
|
#define GPMC_CONFIG7_CSVALID BIT(6)
|
|
|
|
#define GPMC_CONFIG7_BASEADDRESS_MASK 0x3f
|
|
#define GPMC_CONFIG7_CSVALID_MASK BIT(6)
|
|
#define GPMC_CONFIG7_MASKADDRESS_OFFSET 8
|
|
#define GPMC_CONFIG7_MASKADDRESS_MASK (0xf << GPMC_CONFIG7_MASKADDRESS_OFFSET)
|
|
/* All CONFIG7 bits except reserved bits */
|
|
#define GPMC_CONFIG7_MASK (GPMC_CONFIG7_BASEADDRESS_MASK | \
|
|
GPMC_CONFIG7_CSVALID_MASK | \
|
|
GPMC_CONFIG7_MASKADDRESS_MASK)
|
|
|
|
#define GPMC_DEVICETYPE_NOR 0
|
|
#define GPMC_DEVICETYPE_NAND 2
|
|
#define GPMC_CONFIG_WRITEPROTECT 0x00000010
|
|
#define WR_RD_PIN_MONITORING 0x00600000
|
|
|
|
/* ECC commands */
|
|
#define GPMC_ECC_READ 0 /* Reset Hardware ECC for read */
|
|
#define GPMC_ECC_WRITE 1 /* Reset Hardware ECC for write */
|
|
#define GPMC_ECC_READSYN 2 /* Reset before syndrom is read back */
|
|
|
|
#define GPMC_NR_NAND_IRQS 2 /* number of NAND specific IRQs */
|
|
|
|
/* bool type time settings */
|
|
struct gpmc_bool_timings {
|
|
bool cycle2cyclediffcsen;
|
|
bool cycle2cyclesamecsen;
|
|
bool we_extra_delay;
|
|
bool oe_extra_delay;
|
|
bool adv_extra_delay;
|
|
bool cs_extra_delay;
|
|
bool time_para_granularity;
|
|
};
|
|
|
|
/*
|
|
* Note that all values in this struct are in nanoseconds except sync_clk
|
|
* (which is in picoseconds), while the register values are in gpmc_fck cycles.
|
|
*/
|
|
struct gpmc_timings {
|
|
/* Minimum clock period for synchronous mode (in picoseconds) */
|
|
u32 sync_clk;
|
|
|
|
/* Chip-select signal timings corresponding to GPMC_CS_CONFIG2 */
|
|
u32 cs_on; /* Assertion time */
|
|
u32 cs_rd_off; /* Read deassertion time */
|
|
u32 cs_wr_off; /* Write deassertion time */
|
|
|
|
/* ADV signal timings corresponding to GPMC_CONFIG3 */
|
|
u32 adv_on; /* Assertion time */
|
|
u32 adv_rd_off; /* Read deassertion time */
|
|
u32 adv_wr_off; /* Write deassertion time */
|
|
u32 adv_aad_mux_on; /* ADV assertion time for AAD */
|
|
u32 adv_aad_mux_rd_off; /* ADV read deassertion time for AAD */
|
|
u32 adv_aad_mux_wr_off; /* ADV write deassertion time for AAD */
|
|
|
|
/* WE signals timings corresponding to GPMC_CONFIG4 */
|
|
u32 we_on; /* WE assertion time */
|
|
u32 we_off; /* WE deassertion time */
|
|
|
|
/* OE signals timings corresponding to GPMC_CONFIG4 */
|
|
u32 oe_on; /* OE assertion time */
|
|
u32 oe_off; /* OE deassertion time */
|
|
u32 oe_aad_mux_on; /* OE assertion time for AAD */
|
|
u32 oe_aad_mux_off; /* OE deassertion time for AAD */
|
|
|
|
/* Access time and cycle time timings corresponding to GPMC_CONFIG5 */
|
|
u32 page_burst_access; /* Multiple access word delay */
|
|
u32 access; /* Start-cycle to first data valid delay */
|
|
u32 rd_cycle; /* Total read cycle time */
|
|
u32 wr_cycle; /* Total write cycle time */
|
|
|
|
u32 bus_turnaround;
|
|
u32 cycle2cycle_delay;
|
|
|
|
u32 wait_monitoring;
|
|
u32 clk_activation;
|
|
|
|
/* The following are only on OMAP3430 */
|
|
u32 wr_access; /* WRACCESSTIME */
|
|
u32 wr_data_mux_bus; /* WRDATAONADMUXBUS */
|
|
|
|
struct gpmc_bool_timings bool_timings;
|
|
};
|
|
|
|
/* Device timings in picoseconds */
|
|
struct gpmc_device_timings {
|
|
u32 t_ceasu; /* address setup to CS valid */
|
|
u32 t_avdasu; /* address setup to ADV valid */
|
|
/* XXX: try to combine t_avdp_r & t_avdp_w. Issue is
|
|
* of tusb using these timings even for sync whilst
|
|
* ideally for adv_rd/(wr)_off it should have considered
|
|
* t_avdh instead. This indirectly necessitates r/w
|
|
* variations of t_avdp as it is possible to have one
|
|
* sync & other async
|
|
*/
|
|
u32 t_avdp_r; /* ADV low time (what about t_cer ?) */
|
|
u32 t_avdp_w;
|
|
u32 t_aavdh; /* address hold time */
|
|
u32 t_oeasu; /* address setup to OE valid */
|
|
u32 t_aa; /* access time from ADV assertion */
|
|
u32 t_iaa; /* initial access time */
|
|
u32 t_oe; /* access time from OE assertion */
|
|
u32 t_ce; /* access time from CS asertion */
|
|
u32 t_rd_cycle; /* read cycle time */
|
|
u32 t_cez_r; /* read CS deassertion to high Z */
|
|
u32 t_cez_w; /* write CS deassertion to high Z */
|
|
u32 t_oez; /* OE deassertion to high Z */
|
|
u32 t_weasu; /* address setup to WE valid */
|
|
u32 t_wpl; /* write assertion time */
|
|
u32 t_wph; /* write deassertion time */
|
|
u32 t_wr_cycle; /* write cycle time */
|
|
|
|
u32 clk;
|
|
u32 t_bacc; /* burst access valid clock to output delay */
|
|
u32 t_ces; /* CS setup time to clk */
|
|
u32 t_avds; /* ADV setup time to clk */
|
|
u32 t_avdh; /* ADV hold time from clk */
|
|
u32 t_ach; /* address hold time from clk */
|
|
u32 t_rdyo; /* clk to ready valid */
|
|
|
|
u32 t_ce_rdyz; /* XXX: description ?, or use t_cez instead */
|
|
u32 t_ce_avd; /* CS on to ADV on delay */
|
|
|
|
/* XXX: check the possibility of combining
|
|
* cyc_aavhd_oe & cyc_aavdh_we
|
|
*/
|
|
u8 cyc_aavdh_oe;/* read address hold time in cycles */
|
|
u8 cyc_aavdh_we;/* write address hold time in cycles */
|
|
u8 cyc_oe; /* access time from OE assertion in cycles */
|
|
u8 cyc_wpl; /* write deassertion time in cycles */
|
|
u32 cyc_iaa; /* initial access time in cycles */
|
|
|
|
/* extra delays */
|
|
bool ce_xdelay;
|
|
bool avd_xdelay;
|
|
bool oe_xdelay;
|
|
bool we_xdelay;
|
|
};
|
|
|
|
#define GPMC_BURST_4 4 /* 4 word burst */
|
|
#define GPMC_BURST_8 8 /* 8 word burst */
|
|
#define GPMC_BURST_16 16 /* 16 word burst */
|
|
#define GPMC_DEVWIDTH_8BIT 1 /* 8-bit device width */
|
|
#define GPMC_DEVWIDTH_16BIT 2 /* 16-bit device width */
|
|
#define GPMC_MUX_AAD 1 /* Addr-Addr-Data multiplex */
|
|
#define GPMC_MUX_AD 2 /* Addr-Data multiplex */
|
|
|
|
struct gpmc_settings {
|
|
bool burst_wrap; /* enables wrap bursting */
|
|
bool burst_read; /* enables read page/burst mode */
|
|
bool burst_write; /* enables write page/burst mode */
|
|
bool device_nand; /* device is NAND */
|
|
bool sync_read; /* enables synchronous reads */
|
|
bool sync_write; /* enables synchronous writes */
|
|
bool wait_on_read; /* monitor wait on reads */
|
|
bool wait_on_write; /* monitor wait on writes */
|
|
u32 burst_len; /* page/burst length */
|
|
u32 device_width; /* device bus width (8 or 16 bit) */
|
|
u32 mux_add_data; /* multiplex address & data */
|
|
u32 wait_pin; /* wait-pin to be used */
|
|
};
|