mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-30 00:21:06 +00:00
a13110a99f
The RK3399-Q7 SoM is a Qseven-compatible (70mm x 70mm, MXM-230 connector) system-on-module from Theobroma Systems, featuring the Rockchip RK3399. It provides the following feature set: * up to 4GB DDR3 * on-module SPI-NOR flash * on-module eMMC (with 8-bit interace) * SD card (on a baseboad) via edge connector * Gigabit Ethernet w/ on-module Micrel KSZ9031 GbE PHY * HDMI/eDP/MIPI displays * 2x MIPI-CSI * USB - 1x USB 3.0 dual-role (direct connection) - 2x USB 3.0 host + 1x USB 2.0 (on-module USB 3.0 hub) * on-module STM32 Cortex-M0 companion controller, implementing: - low-power RTC functionality (ISL1208 emulation) - fan controller (AMC6821 emulation) - USB<->CAN bridge controller Note that we use a multi-payload FIT image for booting and have Cortex-M0 payload in a separate subimage: we thus rely on the FIT image loader to put it into the SRAM region that ATF expects it in. Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com> Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Fixed build warning on puma-rk3399: Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
73 lines
2 KiB
Text
73 lines
2 KiB
Text
Introduction
|
|
============
|
|
|
|
The RK3399-Q7 (Puma) is a system-on-module featuring the Rockchip
|
|
RK3399 in a Qseven-compatible form-factor.
|
|
|
|
RK3399-Q7 features:
|
|
* CPU: ARMv8 64bit Big-Little architecture,
|
|
* Big: dual-core Cortex-A72
|
|
* Little: quad-core Cortex-A53
|
|
* IRAM: 200KB
|
|
* DRAM: 4GB-128MB dual-channel
|
|
* eMMC: onboard eMMC
|
|
* SD/MMC
|
|
* GbE (onboard Micrel KSZ9031) Gigabit ethernet PHY
|
|
* USB:
|
|
* USB3.0 dual role port
|
|
* 2x USB3.0 host, 1x USB2.0 host via onboard USB3.0 hub
|
|
* Display: HDMI/eDP/MIPI
|
|
* Camera: 2x CSI (one on the edge connector, one on the Q7 specified CSI ZIF)
|
|
* NOR Flash: onboard SPI NOR
|
|
* Companion Controller: onboard additional Cortex-M0 microcontroller
|
|
* RTC
|
|
* fan controller
|
|
* CAN
|
|
|
|
Here is the step-by-step to boot to U-Boot on rk3399.
|
|
|
|
Get the Source and build ATF/Cortex-M0 binaries
|
|
===============================================
|
|
|
|
> git clone git://git.theobroma-systems.com/arm-trusted-firmware.git
|
|
> git clone git://git.theobroma-systems.com/rk3399-cortex-m0.git
|
|
|
|
Compile the ATF
|
|
===============
|
|
|
|
> cd arm-trusted-firmware
|
|
> make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3399 bl31
|
|
> cp build/rk3399/release/bl31.bin ../u-boot
|
|
|
|
Compile the M0 firmware
|
|
=======================
|
|
|
|
> cd ../rk3399-cortex-m0
|
|
> make CROSS_COMPILE=arm-cortex_m0-eabi-
|
|
> cp rk3399m0.bin ../u-boot
|
|
|
|
Compile the U-Boot
|
|
==================
|
|
|
|
> cd ../u-boot
|
|
> make CROSS_COMPILE=aarch64-linux-gnu- puma-rk3399_defconfig all
|
|
|
|
Package the image
|
|
=================
|
|
|
|
> tools/mkimage -n rk3399 -T rksd -d spl/u-boot-spl.bin spl.img
|
|
> tools/mkimage -f board/theobroma/puma_rk3399/fit_spl_atf.its \
|
|
-E rk3399_bl3x.itb
|
|
|
|
Flash the image
|
|
===============
|
|
|
|
Copy the SPL to offset 32k and the FIT image containing the payloads
|
|
(U-Boot proper, ATF, M0 Firmware, devicetree) to offset 256k on a SD
|
|
card.
|
|
|
|
> dd if=spl.img of=/dev/sdb seek=64
|
|
> dd if=rk3399_bl3x.itb of=/dev/sdb seek=512
|
|
|
|
After powering up the board (with the inserted SD card), you should see
|
|
a U-Boot console on UART0 (115200n8).
|