u-boot/drivers/usb/host
Wolfgang Denk 0c2dd9a05b Merge branch 'master' of git://git.denx.de/u-boot-arm
* 'master' of git://git.denx.de/u-boot-arm:
  arm, davinci: add DAVINCI_MMC_CLKID
  arm, davinci_emac: fix driver bug if more then 3 PHYs are detected
  arm, davinci: da850/dm365 lowlevel cleanup
  omap5: Add omap5_evm board build support.
  omap4/5: Add support for booting with CH.
  omap5: emif: Add emif/ddr configurations required for omap5 evm
  omap5: clocks: Add clocks support for omap5 platform.
  omap5: Add minimal support for omap5430.
  omap: Checkpatch fixes
  omap4: make omap4 code common for future reuse
  GCC4.6: Squash warnings in onenand_base.c
  GCC4.6: Fix common/usb.c on xscale
  OneNAND: Add simple OneNAND SPL
  PXA: vpac270: Enable the new generic MMC driver
  PXA: Cleanup serial_pxa
  PXA: Drop csb226 and innokom boards (unmaintained)
  m28evk: Fix comment about the number of RAM banks
  mx31: Fix checkpatch warnings in generic.c
  mx31: Use proper IO accessor for GPR register
  mx31: Remove duplicate definition for GPR register
  qong: Use generic function for configuring GPR register
  M28EVK: Enable USB HOST support
  iMX28: Add USB HOST driver
  iMX28: Add USB and USB PHY register definitions
  M28: Add memory detection into SPL
  iMX28: Fix ARM vector handling
  M28: Add doc/README.m28 documentation
  M28: Add MMC SPL
  iMX28: Add support for DENX M28EVK board
  iMX28: Add u-boot.sb target to Makefile
  iMX28: Add image header generator tool
  iMX28: Add driver for internal RTC
  iMX28: Add GPMI NAND driver
  iMX28: Add APBH DMA driver
  iMX28: Add SPI driver
  iMX28: Add GPIO control
  iMX28: Add I2C bus driver
  iMX28: Add PINMUX control
  FEC: Add support for iMX28 quirks
  iMX28: Add SSP MMC driver
  iMX28: Initial support for iMX28 CPU
  MX25: zmx25: GCC4.6 fix build warnings
  da850: add new config file for AM18xx
  BeagleBoard: config: Switch to ttyO2
  OMAP3: Change omap3_evm maintainer
  devkit8000: Fix NAND SPL on boards with 256MB NAND
  integrator: enable Vpp and disable flash protection
  integrator: add system controller header
  integrator: make flash writeable on boot
  integrator: use io-accessors for board init
  integrator: move text offset to config
  integrator: pass configs for core modules
  ARM: remove superfluous setting of arch_number in board specific code.
  SPL: Allow ARM926EJS to avoid compiling in the CPU support code
  integrator: do not test first part of the memory
  arm: a320: fix broken timer
  ARM: define CONFIG_MACH_TYPE for all ronetix boards
  dm646x: pass board revision info to kernel
  dm646x: add new configuration for dm6467T
  arm, davinci: Fix setting of the SDRAM configuration register
  arm, davinci: Remove the duplication of LPSC functions
  arm, davinci: Rename AM1808 lowlevel functions to DA850
  da8xxevm: fix build error
  ARM: re-add MACH_TYPE_XXXXXX for VCMA9 board and add CONFIG_MACH_TYPE
2011-11-16 20:24:41 +01:00
..
ehci-core.h drivers/usb: regorganisation 2009-04-06 20:40:46 +02:00
ehci-fsl.c drivers/usb/host/ehci-fsl.c: Fix GCC 4.6 build warning 2011-11-11 07:49:01 -06:00
ehci-hcd.c ehci-hcd: Allow cleanups to happen gracefully on a timeout. 2011-09-04 11:36:22 +02:00
ehci-ixp4xx.c drivers/usb: regorganisation 2009-04-06 20:40:46 +02:00
ehci-kirkwood.c ARM: kirkwood: reduce dependence of including platform file 2011-10-27 21:56:33 +02:00
ehci-mpc512x.c MPC5121: Add USB EHCI support 2010-10-18 22:33:32 +02:00
ehci-mxc.c ehci-mxc: remove incorrect comment 2011-11-04 22:06:37 +01:00
ehci-mxs.c iMX28: Add USB HOST driver 2011-11-11 11:36:58 +01:00
ehci-pci.c ehci-pci: Fix PCI EHCI driver for 36-bit 2011-06-25 09:53:10 +02:00
ehci-ppc4xx.c usb: Remove usb_dev_init() from ehci-ppc4xx.c 2010-11-26 21:24:57 +01:00
ehci-vct.c drivers/usb: regorganisation 2009-04-06 20:40:46 +02:00
ehci.h USB: Remove __attribute__ ((packed)) for struct ehci_hccr and ehci_hcor 2011-09-04 11:36:20 +02:00
isp116x-hcd.c mips: Move cpu/mips/* to arch/mips/cpu/* 2010-04-13 09:13:25 +02:00
isp116x.h drivers/usb: regorganisation 2009-04-06 20:40:46 +02:00
Makefile iMX28: Add USB HOST driver 2011-11-11 11:36:58 +01:00
ohci-at91.c AT91: change includes from asm/arch/io.h to asm/io.h 2011-05-18 07:56:51 +02:00
ohci-hcd.c consolidate mdelay by providing a common function for all users 2011-10-22 01:16:08 +02:00
ohci.h drivers/usb/host/ohci-hcd: rename readl/writel to ohci_readl/ohci_writel 2010-06-30 21:38:10 +02:00
r8a66597-hcd.c drivers/usb: regorganisation 2009-04-06 20:40:46 +02:00
r8a66597.h usb: r8a66597: Fix argument mistake of inl 2011-08-08 21:40:40 +02:00
s3c64xx-hcd.c s3c64xx: move s3c64xx header files to asm-arm/arch-s3c64xx 2009-11-27 16:26:13 -06:00
sl811-hcd.c consolidate mdelay by providing a common function for all users 2011-10-22 01:16:08 +02:00
sl811.h drivers/usb: regorganisation 2009-04-06 20:40:46 +02:00