u-boot/board/xilinx/zynqmp/zynqmp.c
Michal Simek f1bc214b00 arm64: zynqmp: Do not define do_reset() if sysreset is enabled
The SPL can also be compiled with sysreset drivers just fine, so
update the condition to cater for that option.
The same change was done by commit efa1a62ad2 ("ARM: imx8m: Do not define
do_reset() if sysreset is enabled").

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2021-07-26 09:18:45 +02:00

818 lines
17 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2014 - 2015 Xilinx, Inc.
* Michal Simek <michal.simek@xilinx.com>
*/
#include <common.h>
#include <command.h>
#include <cpu_func.h>
#include <debug_uart.h>
#include <env.h>
#include <env_internal.h>
#include <init.h>
#include <image.h>
#include <lmb.h>
#include <log.h>
#include <net.h>
#include <sata.h>
#include <ahci.h>
#include <scsi.h>
#include <malloc.h>
#include <wdt.h>
#include <asm/arch/clk.h>
#include <asm/arch/hardware.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/psu_init_gpl.h>
#include <asm/cache.h>
#include <asm/global_data.h>
#include <asm/io.h>
#include <asm/ptrace.h>
#include <dm/device.h>
#include <dm/uclass.h>
#include <usb.h>
#include <dwc3-uboot.h>
#include <zynqmppl.h>
#include <zynqmp_firmware.h>
#include <g_dnl.h>
#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/sizes.h>
#include "../common/board.h"
#include "pm_cfg_obj.h"
#define ZYNQMP_VERSION_SIZE 7
#define EFUSE_VCU_DIS_MASK 0x100
#define EFUSE_VCU_DIS_SHIFT 8
#define EFUSE_GPU_DIS_MASK 0x20
#define EFUSE_GPU_DIS_SHIFT 5
#define IDCODE2_PL_INIT_MASK 0x200
#define IDCODE2_PL_INIT_SHIFT 9
DECLARE_GLOBAL_DATA_PTR;
#if CONFIG_IS_ENABLED(FPGA) && defined(CONFIG_FPGA_ZYNQMPPL)
static xilinx_desc zynqmppl = XILINX_ZYNQMP_DESC;
enum {
ZYNQMP_VARIANT_EG = BIT(0U),
ZYNQMP_VARIANT_EV = BIT(1U),
ZYNQMP_VARIANT_CG = BIT(2U),
ZYNQMP_VARIANT_DR = BIT(3U),
};
static const struct {
u32 id;
u8 device;
u8 variants;
} zynqmp_devices[] = {
{
.id = 0x04711093,
.device = 2,
.variants = ZYNQMP_VARIANT_EG | ZYNQMP_VARIANT_CG,
},
{
.id = 0x04710093,
.device = 3,
.variants = ZYNQMP_VARIANT_EG | ZYNQMP_VARIANT_CG,
},
{
.id = 0x04721093,
.device = 4,
.variants = ZYNQMP_VARIANT_EG | ZYNQMP_VARIANT_CG |
ZYNQMP_VARIANT_EV,
},
{
.id = 0x04720093,
.device = 5,
.variants = ZYNQMP_VARIANT_EG | ZYNQMP_VARIANT_CG |
ZYNQMP_VARIANT_EV,
},
{
.id = 0x04739093,
.device = 6,
.variants = ZYNQMP_VARIANT_EG | ZYNQMP_VARIANT_CG,
},
{
.id = 0x04730093,
.device = 7,
.variants = ZYNQMP_VARIANT_EG | ZYNQMP_VARIANT_CG |
ZYNQMP_VARIANT_EV,
},
{
.id = 0x04738093,
.device = 9,
.variants = ZYNQMP_VARIANT_EG | ZYNQMP_VARIANT_CG,
},
{
.id = 0x04740093,
.device = 11,
.variants = ZYNQMP_VARIANT_EG,
},
{
.id = 0x04750093,
.device = 15,
.variants = ZYNQMP_VARIANT_EG,
},
{
.id = 0x04759093,
.device = 17,
.variants = ZYNQMP_VARIANT_EG,
},
{
.id = 0x04758093,
.device = 19,
.variants = ZYNQMP_VARIANT_EG,
},
{
.id = 0x047E1093,
.device = 21,
.variants = ZYNQMP_VARIANT_DR,
},
{
.id = 0x047E3093,
.device = 23,
.variants = ZYNQMP_VARIANT_DR,
},
{
.id = 0x047E5093,
.device = 25,
.variants = ZYNQMP_VARIANT_DR,
},
{
.id = 0x047E4093,
.device = 27,
.variants = ZYNQMP_VARIANT_DR,
},
{
.id = 0x047E0093,
.device = 28,
.variants = ZYNQMP_VARIANT_DR,
},
{
.id = 0x047E2093,
.device = 29,
.variants = ZYNQMP_VARIANT_DR,
},
{
.id = 0x047E6093,
.device = 39,
.variants = ZYNQMP_VARIANT_DR,
},
{
.id = 0x047FD093,
.device = 43,
.variants = ZYNQMP_VARIANT_DR,
},
{
.id = 0x047F8093,
.device = 46,
.variants = ZYNQMP_VARIANT_DR,
},
{
.id = 0x047FF093,
.device = 47,
.variants = ZYNQMP_VARIANT_DR,
},
{
.id = 0x047FB093,
.device = 48,
.variants = ZYNQMP_VARIANT_DR,
},
{
.id = 0x047FE093,
.device = 49,
.variants = ZYNQMP_VARIANT_DR,
},
{
.id = 0x046d0093,
.device = 67,
.variants = ZYNQMP_VARIANT_DR,
},
};
static const struct {
u32 id;
char *name;
} zynqmp_svd_devices[] = {
{
.id = 0x04714093,
.name = "xck24"
},
{
.id = 0x04724093,
.name = "xck26",
},
};
static char *zynqmp_detect_svd_name(u32 idcode)
{
u32 i;
for (i = 0; i < ARRAY_SIZE(zynqmp_svd_devices); i++) {
if (zynqmp_svd_devices[i].id == (idcode & 0x0FFFFFFF))
return zynqmp_svd_devices[i].name;
}
return "unknown";
}
static char *zynqmp_get_silicon_idcode_name(void)
{
u32 i;
u32 idcode, idcode2;
char name[ZYNQMP_VERSION_SIZE];
u32 ret_payload[PAYLOAD_ARG_CNT];
int ret;
ret = xilinx_pm_request(PM_GET_CHIPID, 0, 0, 0, 0, ret_payload);
if (ret) {
debug("%s: Getting chipid failed\n", __func__);
return "unknown";
}
/*
* Firmware returns:
* payload[0][31:0] = status of the operation
* payload[1]] = IDCODE
* payload[2][19:0] = Version
* payload[2][28:20] = EXTENDED_IDCODE
* payload[2][29] = PL_INIT
*/
idcode = ret_payload[1];
idcode2 = ret_payload[2] >> ZYNQMP_CSU_VERSION_EMPTY_SHIFT;
debug("%s, IDCODE: 0x%0x, IDCODE2: 0x%0x\r\n", __func__, idcode,
idcode2);
for (i = 0; i < ARRAY_SIZE(zynqmp_devices); i++) {
if (zynqmp_devices[i].id == (idcode & 0x0FFFFFFF))
break;
}
if (i >= ARRAY_SIZE(zynqmp_devices))
return zynqmp_detect_svd_name(idcode);
/* Add device prefix to the name */
ret = snprintf(name, ZYNQMP_VERSION_SIZE, "zu%d",
zynqmp_devices[i].device);
if (ret < 0)
return "unknown";
if (zynqmp_devices[i].variants & ZYNQMP_VARIANT_EV) {
/* Devices with EV variant might be EG/CG/EV family */
if (idcode2 & IDCODE2_PL_INIT_MASK) {
u32 family = ((idcode2 & EFUSE_VCU_DIS_MASK) >>
EFUSE_VCU_DIS_SHIFT) << 1 |
((idcode2 & EFUSE_GPU_DIS_MASK) >>
EFUSE_GPU_DIS_SHIFT);
/*
* Get family name based on extended idcode values as
* determined on UG1087, EXTENDED_IDCODE register
* description
*/
switch (family) {
case 0x00:
strncat(name, "ev", 2);
break;
case 0x10:
strncat(name, "eg", 2);
break;
case 0x11:
strncat(name, "cg", 2);
break;
default:
/* Do not append family name*/
break;
}
} else {
/*
* When PL powered down the VCU Disable efuse cannot be
* read. So, ignore the bit and just findout if it is CG
* or EG/EV variant.
*/
strncat(name, (idcode2 & EFUSE_GPU_DIS_MASK) ? "cg" :
"e", 2);
}
} else if (zynqmp_devices[i].variants & ZYNQMP_VARIANT_CG) {
/* Devices with CG variant might be EG or CG family */
strncat(name, (idcode2 & EFUSE_GPU_DIS_MASK) ? "cg" : "eg", 2);
} else if (zynqmp_devices[i].variants & ZYNQMP_VARIANT_EG) {
strncat(name, "eg", 2);
} else if (zynqmp_devices[i].variants & ZYNQMP_VARIANT_DR) {
strncat(name, "dr", 2);
} else {
debug("Variant not identified\n");
}
return strdup(name);
}
#endif
int board_early_init_f(void)
{
#if defined(CONFIG_ZYNQMP_PSU_INIT_ENABLED)
int ret;
ret = psu_init();
if (ret)
return ret;
/*
* PS_SYSMON_ANALOG_BUS register determines mapping between SysMon
* supply sense channel to SysMon supply registers inside the IP.
* This register must be programmed to complete SysMon IP
* configuration. The default register configuration after
* power-up is incorrect. Hence, fix this by writing the
* correct value - 0x3210.
*/
writel(ZYNQMP_PS_SYSMON_ANALOG_BUS_VAL,
ZYNQMP_AMS_PS_SYSMON_ANALOG_BUS);
/* Delay is required for clocks to be propagated */
udelay(1000000);
#endif
#ifdef CONFIG_DEBUG_UART
/* Uart debug for sure */
debug_uart_init();
puts("Debug uart enabled\n"); /* or printch() */
#endif
return 0;
}
static int multi_boot(void)
{
u32 multiboot;
multiboot = readl(&csu_base->multi_boot);
printf("Multiboot:\t%d\n", multiboot);
return 0;
}
#define PS_SYSMON_ANALOG_BUS_VAL 0x3210
#define PS_SYSMON_ANALOG_BUS_REG 0xFFA50914
int board_init(void)
{
#if defined(CONFIG_ZYNQMP_FIRMWARE)
struct udevice *dev;
uclass_get_device_by_name(UCLASS_FIRMWARE, "zynqmp-power", &dev);
if (!dev)
panic("PMU Firmware device not found - Enable it");
#endif
#if defined(CONFIG_SPL_BUILD)
/* Check *at build time* if the filename is an non-empty string */
if (sizeof(CONFIG_ZYNQMP_SPL_PM_CFG_OBJ_FILE) > 1)
zynqmp_pmufw_load_config_object(zynqmp_pm_cfg_obj,
zynqmp_pm_cfg_obj_size);
printf("Silicon version:\t%d\n", zynqmp_get_silicon_version());
#else
if (CONFIG_IS_ENABLED(DM_I2C) && CONFIG_IS_ENABLED(I2C_EEPROM))
xilinx_read_eeprom();
#endif
printf("EL Level:\tEL%d\n", current_el());
/* Bug in ROM sets wrong value in this register */
writel(PS_SYSMON_ANALOG_BUS_VAL, PS_SYSMON_ANALOG_BUS_REG);
#if CONFIG_IS_ENABLED(FPGA) && defined(CONFIG_FPGA_ZYNQMPPL)
zynqmppl.name = zynqmp_get_silicon_idcode_name();
printf("Chip ID:\t%s\n", zynqmppl.name);
fpga_init();
fpga_add(fpga_xilinx, &zynqmppl);
#endif
if (current_el() == 3)
multi_boot();
return 0;
}
int board_early_init_r(void)
{
u32 val;
if (current_el() != 3)
return 0;
val = readl(&crlapb_base->timestamp_ref_ctrl);
val &= ZYNQMP_CRL_APB_TIMESTAMP_REF_CTRL_CLKACT;
if (!val) {
val = readl(&crlapb_base->timestamp_ref_ctrl);
val |= ZYNQMP_CRL_APB_TIMESTAMP_REF_CTRL_CLKACT;
writel(val, &crlapb_base->timestamp_ref_ctrl);
/* Program freq register in System counter */
writel(zynqmp_get_system_timer_freq(),
&iou_scntr_secure->base_frequency_id_register);
/* And enable system counter */
writel(ZYNQMP_IOU_SCNTR_COUNTER_CONTROL_REGISTER_EN,
&iou_scntr_secure->counter_control_register);
}
return 0;
}
unsigned long do_go_exec(ulong (*entry)(int, char * const []), int argc,
char *const argv[])
{
int ret = 0;
if (current_el() > 1) {
smp_kick_all_cpus();
dcache_disable();
armv8_switch_to_el1(0x0, 0, 0, 0, (unsigned long)entry,
ES_TO_AARCH64);
} else {
printf("FAIL: current EL is not above EL1\n");
ret = EINVAL;
}
return ret;
}
#if !defined(CONFIG_SYS_SDRAM_BASE) && !defined(CONFIG_SYS_SDRAM_SIZE)
int dram_init_banksize(void)
{
int ret;
ret = fdtdec_setup_memory_banksize();
if (ret)
return ret;
mem_map_fill();
return 0;
}
int dram_init(void)
{
if (fdtdec_setup_mem_size_base() != 0)
return -EINVAL;
return 0;
}
ulong board_get_usable_ram_top(ulong total_size)
{
phys_size_t size;
phys_addr_t reg;
struct lmb lmb;
/* found enough not-reserved memory to relocated U-Boot */
lmb_init(&lmb);
lmb_add(&lmb, gd->ram_base, gd->ram_size);
boot_fdt_add_mem_rsv_regions(&lmb, (void *)gd->fdt_blob);
size = ALIGN(CONFIG_SYS_MALLOC_LEN + total_size, MMU_SECTION_SIZE),
reg = lmb_alloc(&lmb, size, MMU_SECTION_SIZE);
if (!reg)
reg = gd->ram_top - size;
return reg + size;
}
#else
int dram_init_banksize(void)
{
gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
gd->bd->bi_dram[0].size = get_effective_memsize();
mem_map_fill();
return 0;
}
int dram_init(void)
{
gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
CONFIG_SYS_SDRAM_SIZE);
return 0;
}
#endif
#if !CONFIG_IS_ENABLED(SYSRESET)
void reset_cpu(void)
{
}
#endif
static u8 __maybe_unused zynqmp_get_bootmode(void)
{
u8 bootmode;
u32 reg = 0;
int ret;
ret = zynqmp_mmio_read((ulong)&crlapb_base->boot_mode, &reg);
if (ret)
return -EINVAL;
if (reg >> BOOT_MODE_ALT_SHIFT)
reg >>= BOOT_MODE_ALT_SHIFT;
bootmode = reg & BOOT_MODES_MASK;
return bootmode;
}
#if defined(CONFIG_BOARD_LATE_INIT)
static const struct {
u32 bit;
const char *name;
} reset_reasons[] = {
{ RESET_REASON_DEBUG_SYS, "DEBUG" },
{ RESET_REASON_SOFT, "SOFT" },
{ RESET_REASON_SRST, "SRST" },
{ RESET_REASON_PSONLY, "PS-ONLY" },
{ RESET_REASON_PMU, "PMU" },
{ RESET_REASON_INTERNAL, "INTERNAL" },
{ RESET_REASON_EXTERNAL, "EXTERNAL" },
{}
};
static int reset_reason(void)
{
u32 reg;
int i, ret;
const char *reason = NULL;
ret = zynqmp_mmio_read((ulong)&crlapb_base->reset_reason, &reg);
if (ret)
return -EINVAL;
puts("Reset reason:\t");
for (i = 0; i < ARRAY_SIZE(reset_reasons); i++) {
if (reg & reset_reasons[i].bit) {
reason = reset_reasons[i].name;
printf("%s ", reset_reasons[i].name);
break;
}
}
puts("\n");
env_set("reset_reason", reason);
return 0;
}
static int set_fdtfile(void)
{
char *compatible, *fdtfile;
const char *suffix = ".dtb";
const char *vendor = "xilinx/";
int fdt_compat_len;
if (env_get("fdtfile"))
return 0;
compatible = (char *)fdt_getprop(gd->fdt_blob, 0, "compatible",
&fdt_compat_len);
if (compatible && fdt_compat_len) {
char *name;
debug("Compatible: %s\n", compatible);
name = strchr(compatible, ',');
if (!name)
return -EINVAL;
name++;
fdtfile = calloc(1, strlen(vendor) + strlen(name) +
strlen(suffix) + 1);
if (!fdtfile)
return -ENOMEM;
sprintf(fdtfile, "%s%s%s", vendor, name, suffix);
env_set("fdtfile", fdtfile);
free(fdtfile);
}
return 0;
}
int board_late_init(void)
{
u8 bootmode;
struct udevice *dev;
int bootseq = -1;
int bootseq_len = 0;
int env_targets_len = 0;
const char *mode;
char *new_targets;
char *env_targets;
int ret;
#if defined(CONFIG_USB_ETHER) && !defined(CONFIG_USB_GADGET_DOWNLOAD)
usb_ether_init();
#endif
if (!(gd->flags & GD_FLG_ENV_DEFAULT)) {
debug("Saved variables - Skipping\n");
return 0;
}
if (!CONFIG_IS_ENABLED(ENV_VARS_UBOOT_RUNTIME_CONFIG))
return 0;
ret = set_fdtfile();
if (ret)
return ret;
bootmode = zynqmp_get_bootmode();
puts("Bootmode: ");
switch (bootmode) {
case USB_MODE:
puts("USB_MODE\n");
mode = "usb_dfu0 usb_dfu1";
env_set("modeboot", "usb_dfu_spl");
break;
case JTAG_MODE:
puts("JTAG_MODE\n");
mode = "jtag pxe dhcp";
env_set("modeboot", "jtagboot");
break;
case QSPI_MODE_24BIT:
case QSPI_MODE_32BIT:
mode = "qspi0";
puts("QSPI_MODE\n");
env_set("modeboot", "qspiboot");
break;
case EMMC_MODE:
puts("EMMC_MODE\n");
if (uclass_get_device_by_name(UCLASS_MMC,
"mmc@ff160000", &dev) &&
uclass_get_device_by_name(UCLASS_MMC,
"sdhci@ff160000", &dev)) {
puts("Boot from EMMC but without SD0 enabled!\n");
return -1;
}
debug("mmc0 device found at %p, seq %d\n", dev, dev_seq(dev));
mode = "mmc";
bootseq = dev_seq(dev);
break;
case SD_MODE:
puts("SD_MODE\n");
if (uclass_get_device_by_name(UCLASS_MMC,
"mmc@ff160000", &dev) &&
uclass_get_device_by_name(UCLASS_MMC,
"sdhci@ff160000", &dev)) {
puts("Boot from SD0 but without SD0 enabled!\n");
return -1;
}
debug("mmc0 device found at %p, seq %d\n", dev, dev_seq(dev));
mode = "mmc";
bootseq = dev_seq(dev);
env_set("modeboot", "sdboot");
break;
case SD1_LSHFT_MODE:
puts("LVL_SHFT_");
/* fall through */
case SD_MODE1:
puts("SD_MODE1\n");
if (uclass_get_device_by_name(UCLASS_MMC,
"mmc@ff170000", &dev) &&
uclass_get_device_by_name(UCLASS_MMC,
"sdhci@ff170000", &dev)) {
puts("Boot from SD1 but without SD1 enabled!\n");
return -1;
}
debug("mmc1 device found at %p, seq %d\n", dev, dev_seq(dev));
mode = "mmc";
bootseq = dev_seq(dev);
env_set("modeboot", "sdboot");
break;
case NAND_MODE:
puts("NAND_MODE\n");
mode = "nand0";
env_set("modeboot", "nandboot");
break;
default:
mode = "";
printf("Invalid Boot Mode:0x%x\n", bootmode);
break;
}
if (bootseq >= 0) {
bootseq_len = snprintf(NULL, 0, "%i", bootseq);
debug("Bootseq len: %x\n", bootseq_len);
env_set_hex("bootseq", bootseq);
}
/*
* One terminating char + one byte for space between mode
* and default boot_targets
*/
env_targets = env_get("boot_targets");
if (env_targets)
env_targets_len = strlen(env_targets);
new_targets = calloc(1, strlen(mode) + env_targets_len + 2 +
bootseq_len);
if (!new_targets)
return -ENOMEM;
if (bootseq >= 0)
sprintf(new_targets, "%s%x %s", mode, bootseq,
env_targets ? env_targets : "");
else
sprintf(new_targets, "%s %s", mode,
env_targets ? env_targets : "");
env_set("boot_targets", new_targets);
reset_reason();
return board_late_init_xilinx();
}
#endif
int checkboard(void)
{
puts("Board: Xilinx ZynqMP\n");
return 0;
}
int mmc_get_env_dev(void)
{
struct udevice *dev;
int bootseq = 0;
switch (zynqmp_get_bootmode()) {
case EMMC_MODE:
case SD_MODE:
if (uclass_get_device_by_name(UCLASS_MMC,
"mmc@ff160000", &dev) &&
uclass_get_device_by_name(UCLASS_MMC,
"sdhci@ff160000", &dev)) {
return -1;
}
bootseq = dev_seq(dev);
break;
case SD1_LSHFT_MODE:
case SD_MODE1:
if (uclass_get_device_by_name(UCLASS_MMC,
"mmc@ff170000", &dev) &&
uclass_get_device_by_name(UCLASS_MMC,
"sdhci@ff170000", &dev)) {
return -1;
}
bootseq = dev_seq(dev);
break;
default:
break;
}
debug("bootseq %d\n", bootseq);
return bootseq;
}
enum env_location env_get_location(enum env_operation op, int prio)
{
u32 bootmode = zynqmp_get_bootmode();
if (prio)
return ENVL_UNKNOWN;
switch (bootmode) {
case EMMC_MODE:
case SD_MODE:
case SD1_LSHFT_MODE:
case SD_MODE1:
if (IS_ENABLED(CONFIG_ENV_IS_IN_FAT))
return ENVL_FAT;
if (IS_ENABLED(CONFIG_ENV_IS_IN_EXT4))
return ENVL_EXT4;
return ENVL_NOWHERE;
case NAND_MODE:
if (IS_ENABLED(CONFIG_ENV_IS_IN_NAND))
return ENVL_NAND;
if (IS_ENABLED(CONFIG_ENV_IS_IN_UBI))
return ENVL_UBI;
return ENVL_NOWHERE;
case QSPI_MODE_24BIT:
case QSPI_MODE_32BIT:
if (IS_ENABLED(CONFIG_ENV_IS_IN_SPI_FLASH))
return ENVL_SPI_FLASH;
return ENVL_NOWHERE;
case JTAG_MODE:
default:
return ENVL_NOWHERE;
}
}