u-boot/board/st-ericsson/u8500/u8500_href.c
Dirk Behme 2dd97488ee ARMv7: u8500_href: Add missing header to fix compiler warning
Fix the compiler warning

u8500_href.c: In function 'hrefplus_mmc_power_init':
u8500_href.c:258: warning: implicit declaration of function 'prcmu_i2c_read'
u8500_href.c:265: warning: implicit declaration of function 'prcmu_i2c_write'

by adding the missing header file.

Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
2011-08-04 12:57:20 +02:00

547 lines
16 KiB
C

/*
* Copyright (C) ST-Ericsson SA 2009
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <config.h>
#include <common.h>
#include <i2c.h>
#include <asm/types.h>
#include <asm/io.h>
#include <asm/errno.h>
#include <asm/arch/clock.h>
#include <asm/arch/gpio.h>
#include <asm/arch/hardware.h>
#include <asm/arch/sys_proto.h>
#ifdef CONFIG_MMC
#include "prcmu-fw.h"
#include "../../../drivers/mmc/arm_pl180_mmci.h"
#endif
#define NOMADIK_PER4_BASE (0x80150000)
#define NOMADIK_BACKUPRAM0_BASE (NOMADIK_PER4_BASE + 0x00000)
#define NOMADIK_BACKUPRAM1_BASE (NOMADIK_PER4_BASE + 0x01000)
/* Power, Reset, Clock Management Unit */
/*
* SVA: Smart Video Accelerator
* SIA: Smart Imaging Accelerator
* SGA: Smart Graphic accelerator
* B2R2: Graphic blitter
*/
#define PRCMU_BASE CFG_PRCMU_BASE /* 0x80157000 for U8500 */
#define PRCM_ARMCLKFIX_MGT_REG (PRCMU_BASE + 0x000)
#define PRCM_ACLK_MGT_REG (PRCMU_BASE + 0x004)
#define PRCM_SVAMMDSPCLK_MGT_REG (PRCMU_BASE + 0x008)
#define PRCM_SIAMMDSPCLK_MGT_REG (PRCMU_BASE + 0x00C)
#define PRCM_SAAMMDSPCLK_MGT_REG (PRCMU_BASE + 0x010)
#define PRCM_SGACLK_MGT_REG (PRCMU_BASE + 0x014)
#define PRCM_UARTCLK_MGT_REG (PRCMU_BASE + 0x018)
#define PRCM_MSPCLK_MGT_REG (PRCMU_BASE + 0x01C)
#define PRCM_I2CCLK_MGT_REG (PRCMU_BASE + 0x020)
#define PRCM_SDMMCCLK_MGT_REG (PRCMU_BASE + 0x024)
#define PRCM_SLIMCLK_MGT_REG (PRCMU_BASE + 0x028)
#define PRCM_PER1CLK_MGT_REG (PRCMU_BASE + 0x02C)
#define PRCM_PER2CLK_MGT_REG (PRCMU_BASE + 0x030)
#define PRCM_PER3CLK_MGT_REG (PRCMU_BASE + 0x034)
#define PRCM_PER5CLK_MGT_REG (PRCMU_BASE + 0x038)
#define PRCM_PER6CLK_MGT_REG (PRCMU_BASE + 0x03C)
#define PRCM_PER7CLK_MGT_REG (PRCMU_BASE + 0x040)
#define PRCM_DMACLK_MGT_REG (PRCMU_BASE + 0x074)
#define PRCM_B2R2CLK_MGT_REG (PRCMU_BASE + 0x078)
#define PRCM_PLLSOC0_FREQ_REG (PRCMU_BASE + 0x080)
#define PRCM_PLLSOC1_FREQ_REG (PRCMU_BASE + 0x084)
#define PRCM_PLLARM_FREQ_REG (PRCMU_BASE + 0x088)
#define PRCM_PLLDDR_FREQ_REG (PRCMU_BASE + 0x08C)
#define PRCM_ARM_CHGCLKREQ_REG (PRCMU_BASE + 0x114)
#define PRCM_TCR (PRCMU_BASE + 0x1C8)
/*
* Memory controller register
*/
#define DMC_BASE_ADDR 0x80156000
#define DMC_CTL_97 (DMC_BASE_ADDR + 0x184)
int board_id; /* set in board_late_init() */
/* PLLs for clock management registers */
enum {
GATED = 0,
PLLSOC0, /* pllsw = 001, ffs() = 1 */
PLLSOC1, /* pllsw = 010, ffs() = 2 */
PLLDDR, /* pllsw = 100, ffs() = 3 */
PLLARM,
};
static struct pll_freq_regs {
int idx; /* index fror pll_name and pll_khz arrays */
uint32_t addr;
} pll_freq_regs[] = {
{PLLSOC0, PRCM_PLLSOC0_FREQ_REG},
{PLLSOC1, PRCM_PLLSOC1_FREQ_REG},
{PLLDDR, PRCM_PLLDDR_FREQ_REG},
{PLLARM, PRCM_PLLARM_FREQ_REG},
{0, 0},
};
static const char *pll_name[5] = {"GATED", "SOC0", "SOC1", "DDR", "ARM"};
static uint32_t pll_khz[5]; /* use ffs(pllsw(reg)) as index for 0..3 */
static struct clk_mgt_regs {
uint32_t addr;
uint32_t val;
const char *descr;
} clk_mgt_regs[] = {
/* register content taken from bootrom settings */
{PRCM_ARMCLKFIX_MGT_REG, 0x0120, "ARMCLKFIX"}, /* ena, SOC0/0, ??? */
{PRCM_ACLK_MGT_REG, 0x0125, "ACLK"}, /* ena, SOC0/5, 160 MHz */
{PRCM_SVAMMDSPCLK_MGT_REG, 0x1122, "SVA"}, /* ena, SOC0/2, 400 MHz */
{PRCM_SIAMMDSPCLK_MGT_REG, 0x0022, "SIA"}, /* dis, SOC0/2, 400 MHz */
{PRCM_SAAMMDSPCLK_MGT_REG, 0x0822, "SAA"}, /* dis, SOC0/4, 200 MHz */
{PRCM_SGACLK_MGT_REG, 0x0024, "SGA"}, /* dis, SOC0/4, 200 MHz */
{PRCM_UARTCLK_MGT_REG, 0x0300, "UART"}, /* ena, GATED, CLK38 */
{PRCM_MSPCLK_MGT_REG, 0x0200, "MSP"}, /* dis, GATED, CLK38 */
{PRCM_I2CCLK_MGT_REG, 0x0130, "I2C"}, /* ena, SOC0/16, 50 MHz */
{PRCM_SDMMCCLK_MGT_REG, 0x0130, "SDMMC"}, /* ena, SOC0/16, 50 MHz */
{PRCM_PER1CLK_MGT_REG, 0x126, "PER1"}, /* ena, SOC0/6, 133 MHz */
{PRCM_PER2CLK_MGT_REG, 0x126, "PER2"}, /* ena, SOC0/6, 133 MHz */
{PRCM_PER3CLK_MGT_REG, 0x126, "PER3"}, /* ena, SOC0/6, 133 MHz */
{PRCM_PER5CLK_MGT_REG, 0x126, "PER5"}, /* ena, SOC0/6, 133 MHz */
{PRCM_PER6CLK_MGT_REG, 0x126, "PER6"}, /* ena, SOC0/6, 133 MHz */
{PRCM_PER7CLK_MGT_REG, 0x128, "PER7"}, /* ena, SOC0/8, 100 MHz */
{PRCM_DMACLK_MGT_REG, 0x125, "DMA"}, /* ena, SOC0/5, 160 MHz */
{PRCM_B2R2CLK_MGT_REG, 0x025, "B2R2"}, /* dis, SOC0/5, 160 MHz */
{0, 0, NULL},
};
static void init_regs(void);
DECLARE_GLOBAL_DATA_PTR;
#if defined(CONFIG_SHOW_BOOT_PROGRESS)
void show_boot_progress(int progress)
{
printf("Boot reached stage %d\n", progress);
}
#endif
static unsigned int read_asicid(void)
{
unsigned int *address = (void *)U8500_BOOTROM_BASE
+ U8500_BOOTROM_ASIC_ID_OFFSET;
return readl(address);
}
int cpu_is_u8500v11(void)
{
return read_asicid() == 0x008500A1;
}
/*
* Miscellaneous platform dependent initialisations
*/
int board_early_init_f(void)
{
init_regs();
return 0;
}
int board_init(void)
{
uint32_t unused_cols_rows;
unsigned int nrows;
unsigned int ncols;
gd->bd->bi_arch_number = 0x1A4;
gd->bd->bi_boot_params = 0x00000100;
gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
/*
* Assumption: 2 CS active, both CS have same layout.
* 15 rows max, 11 cols max (controller spec).
* memory chip has 8 banks, I/O width 32 bit.
* The correct way would be to read MR#8: I/O width and density,
* but this requires locking against the PRCMU firmware.
* Simplified approach:
* Read number of unused rows and columns from mem controller.
* size = nCS x 2^(rows+cols) x nbanks x buswidth_bytes
*/
unused_cols_rows = readl(DMC_CTL_97);
nrows = 15 - (unused_cols_rows & 0x07);
ncols = 11 - ((unused_cols_rows & 0x0700) >> 8);
gd->bd->bi_dram[0].size = 2 * (1 << (nrows + ncols)) * 8 * 4;
icache_enable();
return 0;
}
int dram_init(void)
{
gd->ram_size = PHYS_SDRAM_SIZE_1;
return 0;
}
unsigned int addr_vall_arr[] = {
0x8011F000, 0x0000FFFF, /* Clocks for HSI TODO: Enable reqd only */
0x8011F008, 0x00001CFF, /* Clocks for HSI TODO: Enable reqd only */
0x8000F000, 0x00007FFF, /* Clocks for I2C TODO: Enable reqd only */
0x8000F008, 0x00007FFF, /* Clocks for I2C TODO: Enable reqd only */
0x80157020, 0x00000150, /* I2C 48MHz clock */
0x8012F000, 0x00007FFF, /* Clocks for SD TODO: Enable reqd only */
0x8012F008, 0x00007FFF, /* Clocks for SD TODO: Enable reqd only */
0xA03DF000, 0x0000000D, /* Clock for MTU Timers */
0x8011E00C, 0x00000000, /* GPIO ALT FUNC for EMMC */
0x8011E004, 0x0000FFE0, /* GPIO ALT FUNC for EMMC */
0x8011E020, 0x0000FFE0, /* GPIO ALT FUNC for EMMC */
0x8011E024, 0x00000000, /* GPIO ALT FUNC for EMMC */
0x8012E000, 0x20000000, /* GPIO ALT FUNC for UART */
0x8012E00C, 0x00000000, /* GPIO ALT FUNC for SD */
0x8012E004, 0x0FFC0000, /* GPIO ALT FUNC for SD */
0x8012E020, 0x60000000, /* GPIO ALT FUNC for SD */
0x8012E024, 0x60000000, /* GPIO ALT FUNC for SD */
0x801571E4, 0x0000000C, /* PRCMU settings for B2R2,
PRCM_APE_RESETN_SET_REG */
0x80157024, 0x00000130, /* PRCMU settings for EMMC/SD */
0xA03FF000, 0x00000003, /* USB */
0xA03FF008, 0x00000001, /* USB */
0xA03FE00C, 0x00000000, /* USB */
0xA03FE020, 0x00000FFF, /* USB */
0xA03FE024, 0x00000000 /* USB */
};
#ifdef BOARD_LATE_INIT
#ifdef CONFIG_MMC
#define LDO_VAUX3_MASK 0x3
#define LDO_VAUX3_ENABLE 0x1
#define VAUX3_VOLTAGE_2_9V 0xd
#define AB8500_REGU_CTRL2 0x4
#define AB8500_REGU_VRF1VAUX3_REGU_REG 0x040A
#define AB8500_REGU_VRF1VAUX3_SEL_REG 0x0421
static int hrefplus_mmc_power_init(void)
{
int ret;
int val;
if (!cpu_is_u8500v11())
return 0;
/*
* On v1.1 HREF boards (HREF+), Vaux3 needs to be enabled for the SD
* card to work. This is done by enabling the regulators in the AB8500
* via PRCMU I2C transactions.
*
* This code is derived from the handling of AB8500_LDO_VAUX3 in
* ab8500_ldo_enable() and ab8500_ldo_disable() in Linux.
*
* Turn off and delay is required to have it work across soft reboots.
*/
ret = prcmu_i2c_read(AB8500_REGU_CTRL2, AB8500_REGU_VRF1VAUX3_REGU_REG);
if (ret < 0)
goto out;
val = ret;
/* Turn off */
ret = prcmu_i2c_write(AB8500_REGU_CTRL2, AB8500_REGU_VRF1VAUX3_REGU_REG,
val & ~LDO_VAUX3_MASK);
if (ret < 0)
goto out;
udelay(10 * 1000);
/* Set the voltage to 2.9V */
ret = prcmu_i2c_write(AB8500_REGU_CTRL2,
AB8500_REGU_VRF1VAUX3_SEL_REG,
VAUX3_VOLTAGE_2_9V);
if (ret < 0)
goto out;
val = val & ~LDO_VAUX3_MASK;
val = val | LDO_VAUX3_ENABLE;
/* Turn on the supply */
ret = prcmu_i2c_write(AB8500_REGU_CTRL2,
AB8500_REGU_VRF1VAUX3_REGU_REG, val);
out:
return ret;
}
#endif
/*
* called after all initialisation were done, but before the generic
* mmc_initialize().
*/
int board_late_init(void)
{
uchar byte;
/*
* Determine and set board_id environment variable
* 0: mop500, 1: href500
* Above boards have different GPIO expander chips which we can
* distinguish by the chip id.
*
* The board_id environment variable is needed for the Linux bootargs.
*/
(void) i2c_set_bus_num(0);
(void) i2c_read(CONFIG_SYS_I2C_GPIOE_ADDR, 0x80, 1, &byte, 1);
if (byte == 0x01) {
board_id = 0;
setenv("board_id", "0");
} else {
board_id = 1;
setenv("board_id", "1");
}
#ifdef CONFIG_MMC
hrefplus_mmc_power_init();
/*
* config extended GPIO pins for level shifter and
* SDMMC_ENABLE
*/
if (board_id == 0) {
/* MOP500 */
byte = 0x0c;
(void) i2c_write(CONFIG_SYS_I2C_GPIOE_ADDR, 0x89, 1, &byte, 1);
(void) i2c_write(CONFIG_SYS_I2C_GPIOE_ADDR, 0x83, 1, &byte, 1);
} else {
/* HREF */
/* set the direction of GPIO KPY9 and KPY10 */
byte = 0x06;
(void) i2c_write(CONFIG_SYS_I2C_GPIOE_ADDR, 0xC8, 1, &byte, 1);
/* must be a multibyte access */
(void) i2c_write(CONFIG_SYS_I2C_GPIOE_ADDR, 0xC4, 1,
(uchar []) {0x06, 0x06}, 2);
}
#endif /* CONFIG_MMC */
/*
* Create a memargs variable which points uses either the memargs256 or
* memargs512 environment variable, depending on the memory size.
* memargs is used to build the bootargs, memargs256 and memargs512 are
* stored in the environment.
*/
if (gd->bd->bi_dram[0].size == 0x10000000) {
setenv("memargs", "setenv bootargs ${bootargs} ${memargs256}");
setenv("mem", "256M");
} else {
setenv("memargs", "setenv bootargs ${bootargs} ${memargs512}");
setenv("mem", "512M");
}
return 0;
}
#endif /* BOARD_LATE_INIT */
static void early_gpio_setup(struct gpio_register *gpio_reg, u32 bits)
{
writel(readl(&gpio_reg->gpio_dats) | bits, &gpio_reg->gpio_dats);
writel(readl(&gpio_reg->gpio_pdis) & ~bits, &gpio_reg->gpio_pdis);
}
static void init_regs(void)
{
/* FIXME Remove magic register array settings for ED also */
struct prcmu *prcmu = (struct prcmu *) U8500_PRCMU_BASE;
/* Enable timers */
writel(1 << 17, &prcmu->tcr);
u8500_prcmu_enable(&prcmu->per1clk_mgt);
u8500_prcmu_enable(&prcmu->per2clk_mgt);
u8500_prcmu_enable(&prcmu->per3clk_mgt);
u8500_prcmu_enable(&prcmu->per5clk_mgt);
u8500_prcmu_enable(&prcmu->per6clk_mgt);
u8500_prcmu_enable(&prcmu->per7clk_mgt);
u8500_prcmu_enable(&prcmu->uartclk_mgt);
u8500_prcmu_enable(&prcmu->i2cclk_mgt);
u8500_prcmu_enable(&prcmu->sdmmcclk_mgt);
u8500_clock_enable(1, 9, -1); /* GPIO0 */
u8500_clock_enable(2, 11, -1); /* GPIO1 */
u8500_clock_enable(3, 8, -1); /* GPIO2 */
u8500_clock_enable(5, 1, -1); /* GPIO3 */
u8500_clock_enable(3, 6, 6); /* UART2 */
gpio_altfuncenable(GPIO_ALT_I2C_0, "I2C0");
u8500_clock_enable(3, 3, 3); /* I2C0 */
early_gpio_setup((struct gpio_register *)U8500_GPIO_0_BASE, 0x60000000);
gpio_altfuncenable(GPIO_ALT_UART_2, "UART2");
early_gpio_setup((struct gpio_register *)U8500_GPIO_6_BASE, 0x0000ffe0);
gpio_altfuncenable(GPIO_ALT_EMMC, "EMMC");
early_gpio_setup((struct gpio_register *)U8500_GPIO_0_BASE, 0x0000ffe0);
gpio_altfuncenable(GPIO_ALT_SD_CARD0, "SDCARD");
u8500_clock_enable(1, 5, 5); /* SDI0 */
u8500_clock_enable(2, 4, 2); /* SDI4 */
u8500_clock_enable(6, 7, -1); /* MTU0 */
u8500_clock_enable(3, 4, 4); /* SDI2 */
early_gpio_setup((struct gpio_register *)U8500_GPIO_4_BASE, 0x000007ff);
gpio_altfuncenable(GPIO_ALT_POP_EMMC, "EMMC");
/*
* Enabling clocks for all devices which are AMBA devices in the
* kernel. Otherwise they will not get probe()'d because the
* peripheral ID register will not be powered.
*/
/* XXX: some of these differ between ED/V1 */
u8500_clock_enable(1, 1, 1); /* UART1 */
u8500_clock_enable(1, 0, 0); /* UART0 */
u8500_clock_enable(3, 2, 2); /* SSP1 */
u8500_clock_enable(3, 1, 1); /* SSP0 */
u8500_clock_enable(2, 8, -1); /* SPI0 */
u8500_clock_enable(2, 5, 3); /* MSP2 */
}
#ifdef CONFIG_MMC
static int u8500_mmci_board_init(void)
{
enum gpio_error error;
struct gpio_register *gpio_base_address;
gpio_base_address = (void *)(U8500_GPIO_0_BASE);
gpio_base_address->gpio_dats |= 0xFFC0000;
gpio_base_address->gpio_pdis &= ~0xFFC0000;
/* save the GPIO0 AFSELA register */
error = gpio_altfuncenable(GPIO_ALT_SD_CARD0, "MMC");
if (error != GPIO_OK) {
printf("u8500_mmci_board_init() gpio_altfuncenable failed\n");
return -ENODEV;
}
return 0;
}
int board_mmc_init(bd_t *bd)
{
if (u8500_mmci_board_init())
return -ENODEV;
if (arm_pl180_mmci_init())
return -ENODEV;
return 0;
}
#endif
/*
* get_pll_freq_khz - return PLL frequency in kHz
*/
static uint32_t get_pll_freq_khz(uint32_t inclk_khz, uint32_t freq_reg)
{
uint32_t idf, ldf, odf, seldiv, phi;
/*
* PLLOUTCLK = PHI = (INCLK*LDF)/(2*ODF*IDF) if SELDIV2=0
* PLLOUTCLK = PHI = (INCLK*LDF)/(4*ODF*IDF) if SELDIV2=1
* where:
* IDF=R(2:0) (when R=000, IDF=1d)
* LDF = 2*D(7:0) (D must be greater than or equal to 6)
* ODF = N(5:0) (when N=000000, 0DF=1d)
*/
idf = (freq_reg & 0x70000) >> 16;
ldf = (freq_reg & 0xff) * 2;
odf = (freq_reg & 0x3f00) >> 8;
seldiv = (freq_reg & 0x01000000) >> 24;
phi = (inclk_khz * ldf) / (2 * odf * idf);
if (seldiv)
phi = phi/2;
return phi;
}
int do_clkinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
uint32_t inclk_khz;
uint32_t reg, phi;
uint32_t clk_khz;
unsigned int clk_sel;
struct clk_mgt_regs *clks = clk_mgt_regs;
struct pll_freq_regs *plls = pll_freq_regs;
/*
* Go through list of PLLs.
* Initialise pll out frequency array (pll_khz) and print frequency.
*/
inclk_khz = 38400; /* 38.4 MHz */
while (plls->addr) {
reg = readl(plls->addr);
phi = get_pll_freq_khz(inclk_khz, reg);
pll_khz[plls->idx] = phi;
printf("%s PLL out frequency: %d.%d Mhz\n",
pll_name[plls->idx], phi/1000, phi % 1000);
plls++;
}
/* check ARM clock source */
reg = readl(PRCM_ARM_CHGCLKREQ_REG);
printf("A9 running on %s\n",
(reg & 1) ? "external clock" : "ARM PLL");
/* go through list of clk_mgt_reg */
printf("\n%19s %9s %7s %9s enabled\n",
"name(addr)", "value", "PLL", "CLK[MHz]");
while (clks->addr) {
reg = readl(clks->addr);
/* convert bit position into array index */
clk_sel = ffs((reg >> 5) & 0x7); /* PLLSW[2:0] */
if (reg & 0x200)
clk_khz = 38400; /* CLK38 is set */
else if ((reg & 0x1f) == 0)
/* ARMCLKFIX_MGT is 0x120, e.g. div = 0 ! */
clk_khz = 0;
else
clk_khz = pll_khz[clk_sel] / (reg & 0x1f);
printf("%9s(%08x): %08x, %6s, %4d.%03d, %s\n",
clks->descr, clks->addr, reg, pll_name[clk_sel],
clk_khz / 1000, clk_khz % 1000,
(reg & 0x100) ? "ena" : "dis");
clks++;
}
return 0;
}
U_BOOT_CMD(
clkinfo, 1, 1, do_clkinfo,
"print clock info",
""
);