u-boot/arch/x86/include/asm/tables.h
Bin Meng 5e2400e8f8 x86: Write configuration tables in last_stage_init()
We can write the configuration table in last_stage_init() for all x86
boards, but not with coreboot since coreboot already has them.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-29 18:51:49 -06:00

49 lines
1.4 KiB
C

/*
* Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef _X86_TABLES_H_
#define _X86_TABLES_H_
/*
* All x86 tables happen to like the address range from 0xf0000 to 0x100000.
* We use 0xf0000 as the starting address to store those tables, including
* PIRQ routing table, Multi-Processor table and ACPI table.
*/
#define ROM_TABLE_ADDR 0xf0000
/**
* table_compute_checksum() - Compute a table checksum
*
* This computes an 8-bit checksum for the configuration table.
* All bytes in the configuration table, including checksum itself and
* reserved bytes must add up to zero.
*
* @v: configuration table base address
* @len: configuration table size
* @return: the 8-bit checksum
*/
u8 table_compute_checksum(void *v, int len);
/**
* write_tables() - Write x86 configuration tables
*
* This writes x86 configuration tables, including PIRQ routing table,
* Multi-Processor table and ACPI table. Whether a specific type of
* configuration table is written is controlled by a Kconfig option.
*/
void write_tables(void);
/**
* write_pirq_routing_table() - Write PIRQ routing table
*
* This writes PIRQ routing table at a given address.
*
* @start: start address to write PIRQ routing table
* @return: end address of PIRQ routing table
*/
u32 write_pirq_routing_table(u32 start);
#endif /* _X86_TABLES_H_ */