u-boot/arch/arm/mach-tegra/board.c
Simon Glass 7d874132c4 tegra: Move checkboard() into the board code
This is only used by Nvidia boards, so move it into nvidia/common to
simplify things.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2015-05-13 09:24:07 -07:00

191 lines
4.3 KiB
C

/*
* (C) Copyright 2010-2014
* NVIDIA Corporation <www.nvidia.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/clock.h>
#include <asm/arch/funcmux.h>
#include <asm/arch/mc.h>
#include <asm/arch/tegra.h>
#include <asm/arch-tegra/ap.h>
#include <asm/arch-tegra/board.h>
#include <asm/arch-tegra/pmc.h>
#include <asm/arch-tegra/sys_proto.h>
#include <asm/arch-tegra/warmboot.h>
DECLARE_GLOBAL_DATA_PTR;
enum {
/* UARTs which we can enable */
UARTA = 1 << 0,
UARTB = 1 << 1,
UARTC = 1 << 2,
UARTD = 1 << 3,
UARTE = 1 << 4,
UART_COUNT = 5,
};
#if defined(CONFIG_TEGRA_SUPPORT_NON_SECURE)
#if !defined(CONFIG_TEGRA124)
#error tegra_cpu_is_non_secure has only been validated on Tegra124
#endif
bool tegra_cpu_is_non_secure(void)
{
/*
* This register reads 0xffffffff in non-secure mode. This register
* only implements bits 31:20, so the lower bits will always read 0 in
* secure mode. Thus, the lower bits are an indicator for secure vs.
* non-secure mode.
*/
struct mc_ctlr *mc = (struct mc_ctlr *)NV_PA_MC_BASE;
uint32_t mc_s_cfg0 = readl(&mc->mc_security_cfg0);
return (mc_s_cfg0 & 1) == 1;
}
#endif
/* Read the RAM size directly from the memory controller */
unsigned int query_sdram_size(void)
{
struct mc_ctlr *const mc = (struct mc_ctlr *)NV_PA_MC_BASE;
u32 emem_cfg, size_bytes;
emem_cfg = readl(&mc->mc_emem_cfg);
#if defined(CONFIG_TEGRA20)
debug("mc->mc_emem_cfg (MEM_SIZE_KB) = 0x%08x\n", emem_cfg);
size_bytes = get_ram_size((void *)PHYS_SDRAM_1, emem_cfg * 1024);
#else
debug("mc->mc_emem_cfg (MEM_SIZE_MB) = 0x%08x\n", emem_cfg);
/*
* If >=4GB RAM is present, the byte RAM size won't fit into 32-bits
* and will wrap. Clip the reported size to the maximum that a 32-bit
* variable can represent (rounded to a page).
*/
if (emem_cfg >= 4096) {
size_bytes = U32_MAX & ~(0x1000 - 1);
} else {
/* RAM size EMC is programmed to. */
size_bytes = emem_cfg * 1024 * 1024;
/*
* If all RAM fits within 32-bits, it can be accessed without
* LPAE, so go test the RAM size. Otherwise, we can't access
* all the RAM, and get_ram_size() would get confused, so
* avoid using it. There's no reason we should need this
* validation step anyway.
*/
if (emem_cfg <= (0 - PHYS_SDRAM_1) / (1024 * 1024))
size_bytes = get_ram_size((void *)PHYS_SDRAM_1,
size_bytes);
}
#endif
#if defined(CONFIG_TEGRA30) || defined(CONFIG_TEGRA114)
/* External memory limited to 2047 MB due to IROM/HI-VEC */
if (size_bytes == SZ_2G)
size_bytes -= SZ_1M;
#endif
return size_bytes;
}
int dram_init(void)
{
/* We do not initialise DRAM here. We just query the size */
gd->ram_size = query_sdram_size();
return 0;
}
static int uart_configs[] = {
#if defined(CONFIG_TEGRA20)
#if defined(CONFIG_TEGRA_UARTA_UAA_UAB)
FUNCMUX_UART1_UAA_UAB,
#elif defined(CONFIG_TEGRA_UARTA_GPU)
FUNCMUX_UART1_GPU,
#elif defined(CONFIG_TEGRA_UARTA_SDIO1)
FUNCMUX_UART1_SDIO1,
#else
FUNCMUX_UART1_IRRX_IRTX,
#endif
FUNCMUX_UART2_UAD,
-1,
FUNCMUX_UART4_GMC,
-1,
#elif defined(CONFIG_TEGRA30)
FUNCMUX_UART1_ULPI, /* UARTA */
-1,
-1,
-1,
-1,
#elif defined(CONFIG_TEGRA114)
-1,
-1,
-1,
FUNCMUX_UART4_GMI, /* UARTD */
-1,
#else /* Tegra124 */
FUNCMUX_UART1_KBC, /* UARTA */
-1,
-1,
FUNCMUX_UART4_GPIO, /* UARTD */
-1,
#endif
};
/**
* Set up the specified uarts
*
* @param uarts_ids Mask containing UARTs to init (UARTx)
*/
static void setup_uarts(int uart_ids)
{
static enum periph_id id_for_uart[] = {
PERIPH_ID_UART1,
PERIPH_ID_UART2,
PERIPH_ID_UART3,
PERIPH_ID_UART4,
PERIPH_ID_UART5,
};
size_t i;
for (i = 0; i < UART_COUNT; i++) {
if (uart_ids & (1 << i)) {
enum periph_id id = id_for_uart[i];
funcmux_select(id, uart_configs[i]);
clock_ll_start_uart(id);
}
}
}
void board_init_uart_f(void)
{
int uart_ids = 0; /* bit mask of which UART ids to enable */
#ifdef CONFIG_TEGRA_ENABLE_UARTA
uart_ids |= UARTA;
#endif
#ifdef CONFIG_TEGRA_ENABLE_UARTB
uart_ids |= UARTB;
#endif
#ifdef CONFIG_TEGRA_ENABLE_UARTC
uart_ids |= UARTC;
#endif
#ifdef CONFIG_TEGRA_ENABLE_UARTD
uart_ids |= UARTD;
#endif
#ifdef CONFIG_TEGRA_ENABLE_UARTE
uart_ids |= UARTE;
#endif
setup_uarts(uart_ids);
}
#ifndef CONFIG_SYS_DCACHE_OFF
void enable_caches(void)
{
/* Enable D-cache. I-cache is already enabled in start.S */
dcache_enable();
}
#endif