mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-19 19:28:36 +00:00
a9cf6da925
The backlight uses FETs on the TPS65090. Enable this so that the display is visible. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
299 lines
6.5 KiB
C
299 lines
6.5 KiB
C
/*
|
|
* Copyright (C) 2012 Samsung Electronics
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <fdtdec.h>
|
|
#include <asm/io.h>
|
|
#include <errno.h>
|
|
#include <i2c.h>
|
|
#include <netdev.h>
|
|
#include <spi.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/dwmmc.h>
|
|
#include <asm/arch/mmc.h>
|
|
#include <asm/arch/pinmux.h>
|
|
#include <asm/arch/power.h>
|
|
#include <asm/arch/sromc.h>
|
|
#include <power/pmic.h>
|
|
#include <power/max77686_pmic.h>
|
|
#include <power/tps65090_pmic.h>
|
|
#include <tmu.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#ifdef CONFIG_SOUND_MAX98095
|
|
static void board_enable_audio_codec(void)
|
|
{
|
|
/* Enable MAX98095 Codec */
|
|
gpio_direction_output(EXYNOS5_GPIO_X17, 1);
|
|
gpio_set_pull(EXYNOS5_GPIO_X17, S5P_GPIO_PULL_NONE);
|
|
}
|
|
#endif
|
|
|
|
int exynos_init(void)
|
|
{
|
|
#ifdef CONFIG_SOUND_MAX98095
|
|
board_enable_audio_codec();
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_POWER)
|
|
#ifdef CONFIG_POWER_MAX77686
|
|
static int pmic_reg_update(struct pmic *p, int reg, uint regval)
|
|
{
|
|
u32 val;
|
|
int ret = 0;
|
|
|
|
ret = pmic_reg_read(p, reg, &val);
|
|
if (ret) {
|
|
debug("%s: PMIC %d register read failed\n", __func__, reg);
|
|
return -1;
|
|
}
|
|
val |= regval;
|
|
ret = pmic_reg_write(p, reg, val);
|
|
if (ret) {
|
|
debug("%s: PMIC %d register write failed\n", __func__, reg);
|
|
return -1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int max77686_init(void)
|
|
{
|
|
struct pmic *p;
|
|
|
|
if (pmic_init(I2C_PMIC))
|
|
return -1;
|
|
|
|
p = pmic_get("MAX77686_PMIC");
|
|
if (!p)
|
|
return -ENODEV;
|
|
|
|
if (pmic_probe(p))
|
|
return -1;
|
|
|
|
if (pmic_reg_update(p, MAX77686_REG_PMIC_32KHZ, MAX77686_32KHCP_EN))
|
|
return -1;
|
|
|
|
if (pmic_reg_update(p, MAX77686_REG_PMIC_BBAT,
|
|
MAX77686_BBCHOSTEN | MAX77686_BBCVS_3_5V))
|
|
return -1;
|
|
|
|
/* VDD_MIF */
|
|
if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK1OUT,
|
|
MAX77686_BUCK1OUT_1V)) {
|
|
debug("%s: PMIC %d register write failed\n", __func__,
|
|
MAX77686_REG_PMIC_BUCK1OUT);
|
|
return -1;
|
|
}
|
|
|
|
if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK1CRTL,
|
|
MAX77686_BUCK1CTRL_EN))
|
|
return -1;
|
|
|
|
/* VDD_ARM */
|
|
if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK2DVS1,
|
|
MAX77686_BUCK2DVS1_1_3V)) {
|
|
debug("%s: PMIC %d register write failed\n", __func__,
|
|
MAX77686_REG_PMIC_BUCK2DVS1);
|
|
return -1;
|
|
}
|
|
|
|
if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK2CTRL1,
|
|
MAX77686_BUCK2CTRL_ON))
|
|
return -1;
|
|
|
|
/* VDD_INT */
|
|
if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK3DVS1,
|
|
MAX77686_BUCK3DVS1_1_0125V)) {
|
|
debug("%s: PMIC %d register write failed\n", __func__,
|
|
MAX77686_REG_PMIC_BUCK3DVS1);
|
|
return -1;
|
|
}
|
|
|
|
if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK3CTRL,
|
|
MAX77686_BUCK3CTRL_ON))
|
|
return -1;
|
|
|
|
/* VDD_G3D */
|
|
if (pmic_reg_write(p, MAX77686_REG_PMIC_BUCK4DVS1,
|
|
MAX77686_BUCK4DVS1_1_2V)) {
|
|
debug("%s: PMIC %d register write failed\n", __func__,
|
|
MAX77686_REG_PMIC_BUCK4DVS1);
|
|
return -1;
|
|
}
|
|
|
|
if (pmic_reg_update(p, MAX77686_REG_PMIC_BUCK4CTRL1,
|
|
MAX77686_BUCK3CTRL_ON))
|
|
return -1;
|
|
|
|
/* VDD_LDO2 */
|
|
if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO2CTRL1,
|
|
MAX77686_LD02CTRL1_1_5V | EN_LDO))
|
|
return -1;
|
|
|
|
/* VDD_LDO3 */
|
|
if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO3CTRL1,
|
|
MAX77686_LD03CTRL1_1_8V | EN_LDO))
|
|
return -1;
|
|
|
|
/* VDD_LDO5 */
|
|
if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO5CTRL1,
|
|
MAX77686_LD05CTRL1_1_8V | EN_LDO))
|
|
return -1;
|
|
|
|
/* VDD_LDO10 */
|
|
if (pmic_reg_update(p, MAX77686_REG_PMIC_LDO10CTRL1,
|
|
MAX77686_LD10CTRL1_1_8V | EN_LDO))
|
|
return -1;
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_POWER_MAX77686 */
|
|
|
|
int exynos_power_init(void)
|
|
{
|
|
int ret = 0;
|
|
|
|
#ifdef CONFIG_POWER_MAX77686
|
|
ret = max77686_init();
|
|
if (ret)
|
|
return ret;
|
|
#endif
|
|
#ifdef CONFIG_POWER_TPS65090
|
|
/*
|
|
* The TPS65090 may not be in the device tree. If so, it is not
|
|
* an error.
|
|
*/
|
|
ret = tps65090_init();
|
|
if (ret == 0 || ret == -ENODEV)
|
|
return 0;
|
|
#endif
|
|
|
|
return ret;
|
|
}
|
|
#endif /* CONFIG_POWER */
|
|
|
|
#ifdef CONFIG_LCD
|
|
static int board_dp_bridge_setup(void)
|
|
{
|
|
const int max_tries = 10;
|
|
int num_tries, node;
|
|
|
|
/*
|
|
* TODO(sjg): Use device tree for GPIOs when exynos GPIO
|
|
* numbering patch is in mainline.
|
|
*/
|
|
debug("%s\n", __func__);
|
|
node = fdtdec_next_compatible(gd->fdt_blob, 0, COMPAT_NXP_PTN3460);
|
|
if (node < 0) {
|
|
debug("%s: No node for DP bridge in device tree\n", __func__);
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Setup the GPIOs */
|
|
|
|
/* PD is ACTIVE_LOW, and initially de-asserted */
|
|
gpio_set_pull(EXYNOS5_GPIO_Y25, S5P_GPIO_PULL_NONE);
|
|
gpio_direction_output(EXYNOS5_GPIO_Y25, 1);
|
|
|
|
/* Reset is ACTIVE_LOW */
|
|
gpio_set_pull(EXYNOS5_GPIO_X15, S5P_GPIO_PULL_NONE);
|
|
gpio_direction_output(EXYNOS5_GPIO_X15, 0);
|
|
|
|
udelay(10);
|
|
gpio_set_value(EXYNOS5_GPIO_X15, 1);
|
|
|
|
gpio_direction_input(EXYNOS5_GPIO_X07);
|
|
|
|
/*
|
|
* We need to wait for 90ms after bringing up the bridge since there
|
|
* is a phantom "high" on the HPD chip during its bootup. The phantom
|
|
* high comes within 7ms of de-asserting PD and persists for at least
|
|
* 15ms. The real high comes roughly 50ms after PD is de-asserted. The
|
|
* phantom high makes it hard for us to know when the NXP chip is up.
|
|
*/
|
|
mdelay(90);
|
|
|
|
for (num_tries = 0; num_tries < max_tries; num_tries++) {
|
|
/* Check HPD. If it's high, we're all good. */
|
|
if (gpio_get_value(EXYNOS5_GPIO_X07))
|
|
return 0;
|
|
|
|
debug("%s: eDP bridge failed to come up; try %d of %d\n",
|
|
__func__, num_tries, max_tries);
|
|
}
|
|
|
|
/* Immediately go into bridge reset if the hp line is not high */
|
|
return -ENODEV;
|
|
}
|
|
|
|
void exynos_cfg_lcd_gpio(void)
|
|
{
|
|
/* For Backlight */
|
|
gpio_cfg_pin(EXYNOS5_GPIO_B20, S5P_GPIO_OUTPUT);
|
|
gpio_set_value(EXYNOS5_GPIO_B20, 1);
|
|
|
|
/* LCD power on */
|
|
gpio_cfg_pin(EXYNOS5_GPIO_X15, S5P_GPIO_OUTPUT);
|
|
gpio_set_value(EXYNOS5_GPIO_X15, 1);
|
|
|
|
/* Set Hotplug detect for DP */
|
|
gpio_cfg_pin(EXYNOS5_GPIO_X07, S5P_GPIO_FUNC(0x3));
|
|
}
|
|
|
|
void exynos_set_dp_phy(unsigned int onoff)
|
|
{
|
|
set_dp_phy_ctrl(onoff);
|
|
}
|
|
|
|
void exynos_backlight_on(unsigned int on)
|
|
{
|
|
debug("%s(%u)\n", __func__, on);
|
|
|
|
if (!on)
|
|
return;
|
|
|
|
#ifdef CONFIG_POWER_TPS65090
|
|
int ret;
|
|
|
|
ret = tps65090_fet_enable(1); /* Enable FET1, backlight */
|
|
if (ret)
|
|
return;
|
|
|
|
/* T5 in the LCD timing spec (defined as > 10ms) */
|
|
mdelay(10);
|
|
|
|
/* board_dp_backlight_pwm */
|
|
gpio_direction_output(EXYNOS5_GPIO_B20, 1);
|
|
|
|
/* T6 in the LCD timing spec (defined as > 10ms) */
|
|
mdelay(10);
|
|
|
|
/* board_dp_backlight_en */
|
|
gpio_direction_output(EXYNOS5_GPIO_X30, 1);
|
|
#endif
|
|
}
|
|
|
|
void exynos_lcd_power_on(void)
|
|
{
|
|
int ret;
|
|
|
|
debug("%s\n", __func__);
|
|
|
|
#ifdef CONFIG_POWER_TPS65090
|
|
/* board_dp_lcd_vdd */
|
|
tps65090_fet_enable(6); /* Enable FET6, lcd panel */
|
|
#endif
|
|
|
|
ret = board_dp_bridge_setup();
|
|
if (ret && ret != -ENODEV)
|
|
printf("LCD bridge failed to enable: %d\n", ret);
|
|
}
|
|
|
|
#endif
|