mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-19 19:28:36 +00:00
383 lines
10 KiB
C
383 lines
10 KiB
C
/*
|
|
* (C) Copyright 2000
|
|
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
|
|
* Marius Groeger <mgroeger@sysgo.de>
|
|
*
|
|
* Board specific routines for the MBX
|
|
*
|
|
* - initialisation
|
|
* - interface to VPD data (mac address, clock speeds)
|
|
* - memory controller
|
|
* - serial io initialisation
|
|
* - ethernet io initialisation
|
|
*
|
|
* -----------------------------------------------------------------
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <commproc.h>
|
|
#include <mpc8xx.h>
|
|
#include <net.h>
|
|
#include "dimm.h"
|
|
#include "vpd.h"
|
|
#include "csr.h"
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
static const uint sdram_table_40[] = {
|
|
/* DRAM - single read. (offset 0 in upm RAM)
|
|
*/
|
|
0xCFAFC004, 0x0FAFC404, 0x0CAF0C04, 0x30AF0C00,
|
|
0xF1BF4805, 0xFFFFC005, 0xFFFFC005, 0xFFFFC005,
|
|
|
|
/* DRAM - burst read. (offset 8 in upm RAM)
|
|
*/
|
|
0xCFAFC004, 0x0FAFC404, 0x0CAF0C04, 0x03AF0C08,
|
|
0x0CAF0C04, 0x03AF0C08, 0x0CAF0C04, 0x03AF0C08,
|
|
0x0CAF0C04, 0x30AF0C00, 0xF3BF4805, 0xFFFFC005,
|
|
0xFFFFC005, 0xFFFFC005, 0xFFFFC005, 0xFFFFC005,
|
|
|
|
/* DRAM - single write. (offset 18 in upm RAM)
|
|
*/
|
|
0xCFFF0004, 0x0FFF0404, 0x0CFF0C00, 0x33FF4804,
|
|
0xFFFFC005, 0xFFFFC005, 0xFFFFC005, 0xFFFFC005,
|
|
|
|
/* DRAM - burst write. (offset 20 in upm RAM)
|
|
*/
|
|
0xCFFF0004, 0x0FFF0404, 0x0CFF0C00, 0x03FF0C0C,
|
|
0x0CFF0C00, 0x03FF0C0C, 0x0CFF0C00, 0x03FF0C0C,
|
|
0x0CFF0C00, 0x33FF4804, 0xFFFFC005, 0xFFFFC005,
|
|
0xFFFFC005, 0xFFFFC005, 0xFFFFC005, 0xFFFFC005,
|
|
|
|
/* refresh (offset 30 in upm RAM)
|
|
*/
|
|
0xFCFFC004, 0xC0FFC004, 0x01FFC004, 0x0FFFC004,
|
|
0x3FFFC004, 0xFFFFC005, 0xFFFFC005, 0xFFFFC005,
|
|
0xFFFFC005, 0xFFFFC005, 0xFFFFC005, 0xFFFFC005,
|
|
|
|
/* exception. (offset 3c in upm RAM)
|
|
*/
|
|
0xFFFFC007, 0xFFFFC007, 0xFFFFC007, 0xFFFFC007,
|
|
};
|
|
|
|
static const uint sdram_table_50[] = {
|
|
/* DRAM - single read. (offset 0 in upm RAM)
|
|
*/
|
|
0xCFAFC004, 0x0FAFC404, 0x0CAF8C04, 0x10AF0C04,
|
|
0xF0AF0C00, 0xF3BF4805, 0xFFFFC005, 0xFFFFC005,
|
|
|
|
/* DRAM - burst read. (offset 8 in upm RAM)
|
|
*/
|
|
0xCFAFC004, 0X0FAFC404, 0X0CAF8C04, 0X00AF0C04,
|
|
/* 0X07AF0C08, 0X0CAF0C04, 0X01AF0C04, 0X0FAF0C04, */
|
|
0X07AF0C08, 0X0CAF0C04, 0X01AF0C04, 0X0FAF0C08,
|
|
0X0CAF0C04, 0X01AF0C04, 0X0FAF0C08, 0X0CAF0C04,
|
|
/* 0X10AF0C04, 0XF0AFC000, 0XF3FF4805, 0XFFFFC005, */
|
|
0X10AF0C04, 0XF0AFC000, 0XF3BF4805, 0XFFFFC005,
|
|
|
|
/* DRAM - single write. (offset 18 in upm RAM)
|
|
*/
|
|
0xCFFF0004, 0x0FFF0404, 0x0CFF0C00, 0x13FF4804,
|
|
0xFFFFC004, 0xFFFFC005, 0xFFFFC005, 0xFFFFC005,
|
|
|
|
/* DRAM - burst write. (offset 20 in upm RAM)
|
|
*/
|
|
0xCFFF0004, 0x0FFF0404, 0x0CFF0C00, 0x03FF0C0C,
|
|
0x0CFF0C00, 0x03FF0C0C, 0x0CFF0C00, 0x03FF0C0C,
|
|
0x0CFF0C00, 0x13FF4804, 0xFFFFC004, 0xFFFFC005,
|
|
0xFFFFC005, 0xFFFFC005, 0xFFFFC005, 0xFFFFC005,
|
|
|
|
/* refresh (offset 30 in upm RAM)
|
|
*/
|
|
0xFCFFC004, 0xC0FFC004, 0x01FFC004, 0x0FFFC004,
|
|
0x1FFFC004, 0xFFFFC004, 0xFFFFC005, 0xFFFFC005,
|
|
0xFFFFC005, 0xFFFFC005, 0xFFFFC005, 0xFFFFC005,
|
|
|
|
/* exception. (offset 3c in upm RAM)
|
|
*/
|
|
0xFFFFC007, 0xFFFFC007, 0xFFFFC007, 0xFFFFC007,
|
|
};
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
#ifdef CONFIG_SYS_USE_OSCCLK
|
|
static unsigned int get_reffreq(void);
|
|
#endif
|
|
static unsigned int board_get_cpufreq(void);
|
|
|
|
void mbx_init (void)
|
|
{
|
|
volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
|
|
volatile memctl8xx_t *memctl = &immr->im_memctl;
|
|
ulong speed, plprcr, sccr;
|
|
ulong br0_32 = memctl->memc_br0 & 0x400;
|
|
|
|
/* real-time clock status and control register */
|
|
immr->im_sitk.sitk_rtcsck = KAPWR_KEY;
|
|
immr->im_sit.sit_rtcsc = 0x00C3;
|
|
|
|
/* SIEL and SIMASK Registers (see MBX PRG 2-3) */
|
|
immr->im_siu_conf.sc_simask = 0x00000000;
|
|
immr->im_siu_conf.sc_siel = 0xAAAA0000;
|
|
immr->im_siu_conf.sc_tesr = 0xFFFFFFFF;
|
|
|
|
/*
|
|
* Prepare access to i2c bus. The MBX offers 3 devices on the i2c bus:
|
|
* 1. Vital Product Data (contains clock speeds, MAC address etc, see vpd.h)
|
|
* 2. RAM Specs (see dimm.h)
|
|
* 2. DIMM Specs (see dimm.h)
|
|
*/
|
|
vpd_init ();
|
|
|
|
/* system clock and reset control register */
|
|
immr->im_clkrstk.cark_sccrk = KAPWR_KEY;
|
|
sccr = immr->im_clkrst.car_sccr;
|
|
sccr &= SCCR_MASK;
|
|
sccr |= CONFIG_SYS_SCCR;
|
|
immr->im_clkrst.car_sccr = sccr;
|
|
|
|
speed = board_get_cpufreq ();
|
|
|
|
#if ((CONFIG_SYS_PLPRCR & PLPRCR_MF_MSK) != 0)
|
|
plprcr = CONFIG_SYS_PLPRCR;
|
|
#else
|
|
plprcr = immr->im_clkrst.car_plprcr;
|
|
plprcr &= PLPRCR_MF_MSK; /* isolate MF field */
|
|
plprcr |= CONFIG_SYS_PLPRCR; /* reset control bits */
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_USE_OSCCLK /* See doc/README.MBX ! */
|
|
plprcr |= ((speed + get_reffreq() / 2) / refclock - 1) << 20;
|
|
#endif
|
|
|
|
immr->im_clkrstk.cark_plprcrk = KAPWR_KEY;
|
|
immr->im_clkrst.car_plprcr = plprcr;
|
|
|
|
/*
|
|
* preliminary setup of memory controller:
|
|
* - map Flash, otherwise configuration/status
|
|
* registers won't be accessible when read
|
|
* by board_init_f.
|
|
* - map NVRAM and configuation/status registers.
|
|
* - map pci registers.
|
|
* - DON'T map ram yet, this is done in initdram().
|
|
*/
|
|
switch (speed / 1000000) {
|
|
case 40:
|
|
memctl->memc_br0 = 0xFE000000 | br0_32 | 1;
|
|
memctl->memc_or0 = 0xFF800930;
|
|
memctl->memc_or4 = CONFIG_SYS_NVRAM_OR | 0x920;
|
|
memctl->memc_br4 = CONFIG_SYS_NVRAM_BASE | 0x401;
|
|
break;
|
|
case 50:
|
|
memctl->memc_br0 = 0xFE000000 | br0_32 | 1;
|
|
memctl->memc_or0 = 0xFF800940;
|
|
memctl->memc_or4 = CONFIG_SYS_NVRAM_OR | 0x930;
|
|
memctl->memc_br4 = CONFIG_SYS_NVRAM_BASE | 0x401;
|
|
break;
|
|
default:
|
|
hang ();
|
|
break;
|
|
}
|
|
#ifdef CONFIG_USE_PCI
|
|
memctl->memc_or5 = CONFIG_SYS_PCIMEM_OR;
|
|
memctl->memc_br5 = CONFIG_SYS_PCIMEM_BASE | 0x001;
|
|
memctl->memc_or6 = CONFIG_SYS_PCIBRIDGE_OR;
|
|
memctl->memc_br6 = CONFIG_SYS_PCIBRIDGE_BASE | 0x001;
|
|
#endif
|
|
/*
|
|
* FIXME: I do not understand why I have to call this to
|
|
* initialise the control register here before booting from
|
|
* the PCMCIA card but if I do not the Linux kernel falls
|
|
* over in a big heap. If you can answer this question I
|
|
* would like to know about it.
|
|
*/
|
|
board_ether_init();
|
|
}
|
|
|
|
void board_serial_init (void)
|
|
{
|
|
MBX_CSR1 &= ~(CSR1_COM1EN | CSR1_XCVRDIS);
|
|
}
|
|
|
|
void board_ether_init (void)
|
|
{
|
|
MBX_CSR1 &= ~(CSR1_EAEN | CSR1_ELEN);
|
|
MBX_CSR1 |= CSR1_ETEN | CSR1_TPEN | CSR1_FDDIS;
|
|
}
|
|
|
|
static unsigned int board_get_cpufreq (void)
|
|
{
|
|
#ifndef CONFIG_8xx_GCLK_FREQ
|
|
vpd_packet_t *packet;
|
|
ulong *p;
|
|
|
|
packet = vpd_find_packet (VPD_PID_ICS);
|
|
p = (ulong *)packet->data;
|
|
return *p;
|
|
#else
|
|
return((unsigned int)CONFIG_8xx_GCLK_FREQ );
|
|
#endif /* CONFIG_8xx_GCLK_FREQ */
|
|
}
|
|
|
|
#ifdef CONFIG_SYS_USE_OSCCLK
|
|
static unsigned int get_reffreq (void)
|
|
{
|
|
vpd_packet_t *packet;
|
|
ulong *p;
|
|
|
|
packet = vpd_find_packet (VPD_PID_RCS);
|
|
p = (ulong *)packet->data;
|
|
return *p;
|
|
}
|
|
#endif
|
|
|
|
static void board_get_enetaddr(uchar *addr)
|
|
{
|
|
int i;
|
|
vpd_packet_t *packet;
|
|
|
|
packet = vpd_find_packet (VPD_PID_EA);
|
|
for (i = 0; i < 6; i++)
|
|
addr[i] = packet->data[i];
|
|
}
|
|
|
|
int misc_init_r(void)
|
|
{
|
|
uchar enetaddr[6];
|
|
|
|
if (!eth_getenv_enetaddr("ethaddr", enetaddr)) {
|
|
board_get_enetaddr(enetaddr);
|
|
eth_setenv_enetaddr("ethaddr", enetaddr);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Check Board Identity:
|
|
*/
|
|
|
|
int checkboard (void)
|
|
{
|
|
vpd_packet_t *packet;
|
|
int i;
|
|
const char *const fmt =
|
|
"\n *** Warning: Low Battery Status - %s Battery ***";
|
|
|
|
puts ("Board: ");
|
|
|
|
packet = vpd_find_packet (VPD_PID_PID);
|
|
for (i = 0; i < packet->size; i++) {
|
|
serial_putc (packet->data[i]);
|
|
}
|
|
packet = vpd_find_packet (VPD_PID_MT);
|
|
for (i = 0; i < packet->size; i++) {
|
|
serial_putc (packet->data[i]);
|
|
}
|
|
serial_putc ('(');
|
|
packet = vpd_find_packet (VPD_PID_FAN);
|
|
for (i = 0; i < packet->size; i++) {
|
|
serial_putc (packet->data[i]);
|
|
}
|
|
serial_putc (')');
|
|
|
|
if (!(MBX_CSR2 & SR2_BATGD))
|
|
printf (fmt, "On-Board");
|
|
if (!(MBX_CSR2 & SR2_NVBATGD))
|
|
printf (fmt, "NVRAM");
|
|
|
|
serial_putc ('\n');
|
|
|
|
return (0);
|
|
}
|
|
|
|
/* ------------------------------------------------------------------------- */
|
|
|
|
static ulong get_ramsize (dimm_t * dimm)
|
|
{
|
|
ulong size = 0;
|
|
|
|
if (dimm->fmt == 1 || dimm->fmt == 2 || dimm->fmt == 3
|
|
|| dimm->fmt == 4) {
|
|
size = (1 << (dimm->n_row + dimm->n_col)) * dimm->n_banks *
|
|
((dimm->data_w_hi << 8 | dimm->data_w_lo) / 8);
|
|
}
|
|
|
|
return size;
|
|
}
|
|
|
|
phys_size_t initdram (int board_type)
|
|
{
|
|
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
|
|
volatile memctl8xx_t *memctl = &immap->im_memctl;
|
|
unsigned long ram_sz = 0;
|
|
unsigned long dimm_sz = 0;
|
|
dimm_t vpd_dimm, vpd_dram;
|
|
unsigned int speed = board_get_cpufreq () / 1000000;
|
|
|
|
if (vpd_read (0xa2, (uchar *) & vpd_dimm, sizeof (vpd_dimm), 0) > 0) {
|
|
dimm_sz = get_ramsize (&vpd_dimm);
|
|
}
|
|
if (vpd_read (0xa6, (uchar *) & vpd_dram, sizeof (vpd_dram), 0) > 0) {
|
|
ram_sz = get_ramsize (&vpd_dram);
|
|
}
|
|
|
|
/*
|
|
* Only initialize memory controller when running from FLASH.
|
|
* When running from RAM, don't touch it.
|
|
*/
|
|
if ((ulong) initdram & 0xff000000) {
|
|
ulong dimm_bank;
|
|
ulong br0_32 = memctl->memc_br0 & 0x400;
|
|
|
|
switch (speed) {
|
|
case 40:
|
|
upmconfig (UPMA, (uint *) sdram_table_40,
|
|
sizeof (sdram_table_40) / sizeof (uint));
|
|
memctl->memc_mptpr = 0x0200;
|
|
memctl->memc_mamr = dimm_sz ? 0x06801000 : 0x13801000;
|
|
memctl->memc_or7 = 0xff800930;
|
|
memctl->memc_br7 = 0xfc000000 | (br0_32 ^ br0_32) | 1;
|
|
break;
|
|
case 50:
|
|
upmconfig (UPMA, (uint *) sdram_table_50,
|
|
sizeof (sdram_table_50) / sizeof (uint));
|
|
memctl->memc_mptpr = 0x0200;
|
|
memctl->memc_mamr = dimm_sz ? 0x08801000 : 0x1880100;
|
|
memctl->memc_or7 = 0xff800940;
|
|
memctl->memc_br7 = 0xfc000000 | (br0_32 ^ br0_32) | 1;
|
|
break;
|
|
default:
|
|
hang ();
|
|
break;
|
|
}
|
|
|
|
/* now map ram and dimm, largest one first */
|
|
dimm_bank = dimm_sz / 2;
|
|
if (!dimm_sz) {
|
|
memctl->memc_or1 = ~(ram_sz - 1) | 0x400;
|
|
memctl->memc_br1 = CONFIG_SYS_SDRAM_BASE | 0x81;
|
|
memctl->memc_br2 = 0;
|
|
memctl->memc_br3 = 0;
|
|
} else if (ram_sz > dimm_bank) {
|
|
memctl->memc_or1 = ~(ram_sz - 1) | 0x400;
|
|
memctl->memc_br1 = CONFIG_SYS_SDRAM_BASE | 0x81;
|
|
memctl->memc_or2 = ~(dimm_bank - 1) | 0x400;
|
|
memctl->memc_br2 = (CONFIG_SYS_SDRAM_BASE + ram_sz) | 0x81;
|
|
memctl->memc_or3 = ~(dimm_bank - 1) | 0x400;
|
|
memctl->memc_br3 = (CONFIG_SYS_SDRAM_BASE + ram_sz + dimm_bank) \
|
|
| 0x81;
|
|
} else {
|
|
memctl->memc_or2 = ~(dimm_bank - 1) | 0x400;
|
|
memctl->memc_br2 = CONFIG_SYS_SDRAM_BASE | 0x81;
|
|
memctl->memc_or3 = ~(dimm_bank - 1) | 0x400;
|
|
memctl->memc_br3 = (CONFIG_SYS_SDRAM_BASE + dimm_bank) | 0x81;
|
|
memctl->memc_or1 = ~(ram_sz - 1) | 0x400;
|
|
memctl->memc_br1 = (CONFIG_SYS_SDRAM_BASE + dimm_sz) | 0x81;
|
|
}
|
|
}
|
|
|
|
return ram_sz + dimm_sz;
|
|
}
|