mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 08:57:58 +00:00
1d4b3b2fcb
In case the eMMC contains any GP partitions or user sets up new GP partitions, the size of these GP partitions reduce the size of the USER partition. Subtract the size of those GP partitions from the calculated size of USER partition when using `user enh start -`. The following test used to fail before: ``` u-boot=> mmc hwpartition gp1 524288 enh user enh 0 - wrrel on check Partition configuration: User Enhanced Start: 0 Bytes User Enhanced Size: 1.8 GiB User partition write reliability: on GP1 Capacity: 256 MiB ENH No GP2 partition No GP3 partition No GP4 partition Total enhanced size exceeds maximum (261 > 229) Failed! ``` The test now passes: ``` u-boot=> mmc hwpartition gp1 524288 enh user enh 0 - wrrel on check Partition configuration: User Enhanced Start: 0 Bytes User Enhanced Size: 1.5 GiB User partition write reliability: on GP1 Capacity: 256 MiB ENH No GP2 partition No GP3 partition No GP4 partition ``` Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Peng Fan <peng.fan@nxp.com> Cc: Stefano Babic <sbabic@denx.de> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
1176 lines
30 KiB
C
1176 lines
30 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2003
|
|
* Kyle Harris, kharris@nexus-tech.net
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <blk.h>
|
|
#include <command.h>
|
|
#include <console.h>
|
|
#include <memalign.h>
|
|
#include <mmc.h>
|
|
#include <part.h>
|
|
#include <sparse_format.h>
|
|
#include <image-sparse.h>
|
|
|
|
static int curr_device = -1;
|
|
|
|
static void print_mmcinfo(struct mmc *mmc)
|
|
{
|
|
int i;
|
|
|
|
printf("Device: %s\n", mmc->cfg->name);
|
|
printf("Manufacturer ID: %x\n", mmc->cid[0] >> 24);
|
|
printf("OEM: %x\n", (mmc->cid[0] >> 8) & 0xffff);
|
|
printf("Name: %c%c%c%c%c \n", mmc->cid[0] & 0xff,
|
|
(mmc->cid[1] >> 24), (mmc->cid[1] >> 16) & 0xff,
|
|
(mmc->cid[1] >> 8) & 0xff, mmc->cid[1] & 0xff);
|
|
|
|
printf("Bus Speed: %d\n", mmc->clock);
|
|
#if CONFIG_IS_ENABLED(MMC_VERBOSE)
|
|
printf("Mode: %s\n", mmc_mode_name(mmc->selected_mode));
|
|
mmc_dump_capabilities("card capabilities", mmc->card_caps);
|
|
mmc_dump_capabilities("host capabilities", mmc->host_caps);
|
|
#endif
|
|
printf("Rd Block Len: %d\n", mmc->read_bl_len);
|
|
|
|
printf("%s version %d.%d", IS_SD(mmc) ? "SD" : "MMC",
|
|
EXTRACT_SDMMC_MAJOR_VERSION(mmc->version),
|
|
EXTRACT_SDMMC_MINOR_VERSION(mmc->version));
|
|
if (EXTRACT_SDMMC_CHANGE_VERSION(mmc->version) != 0)
|
|
printf(".%d", EXTRACT_SDMMC_CHANGE_VERSION(mmc->version));
|
|
printf("\n");
|
|
|
|
printf("High Capacity: %s\n", mmc->high_capacity ? "Yes" : "No");
|
|
puts("Capacity: ");
|
|
print_size(mmc->capacity, "\n");
|
|
|
|
printf("Bus Width: %d-bit%s\n", mmc->bus_width,
|
|
mmc->ddr_mode ? " DDR" : "");
|
|
|
|
#if CONFIG_IS_ENABLED(MMC_WRITE)
|
|
puts("Erase Group Size: ");
|
|
print_size(((u64)mmc->erase_grp_size) << 9, "\n");
|
|
#endif
|
|
|
|
if (!IS_SD(mmc) && mmc->version >= MMC_VERSION_4_41) {
|
|
bool has_enh = (mmc->part_support & ENHNCD_SUPPORT) != 0;
|
|
bool usr_enh = has_enh && (mmc->part_attr & EXT_CSD_ENH_USR);
|
|
ALLOC_CACHE_ALIGN_BUFFER(u8, ext_csd, MMC_MAX_BLOCK_LEN);
|
|
u8 wp;
|
|
int ret;
|
|
|
|
#if CONFIG_IS_ENABLED(MMC_HW_PARTITIONING)
|
|
puts("HC WP Group Size: ");
|
|
print_size(((u64)mmc->hc_wp_grp_size) << 9, "\n");
|
|
#endif
|
|
|
|
puts("User Capacity: ");
|
|
print_size(mmc->capacity_user, usr_enh ? " ENH" : "");
|
|
if (mmc->wr_rel_set & EXT_CSD_WR_DATA_REL_USR)
|
|
puts(" WRREL\n");
|
|
else
|
|
putc('\n');
|
|
if (usr_enh) {
|
|
puts("User Enhanced Start: ");
|
|
print_size(mmc->enh_user_start, "\n");
|
|
puts("User Enhanced Size: ");
|
|
print_size(mmc->enh_user_size, "\n");
|
|
}
|
|
puts("Boot Capacity: ");
|
|
print_size(mmc->capacity_boot, has_enh ? " ENH\n" : "\n");
|
|
puts("RPMB Capacity: ");
|
|
print_size(mmc->capacity_rpmb, has_enh ? " ENH\n" : "\n");
|
|
|
|
for (i = 0; i < ARRAY_SIZE(mmc->capacity_gp); i++) {
|
|
bool is_enh = has_enh &&
|
|
(mmc->part_attr & EXT_CSD_ENH_GP(i));
|
|
if (mmc->capacity_gp[i]) {
|
|
printf("GP%i Capacity: ", i+1);
|
|
print_size(mmc->capacity_gp[i],
|
|
is_enh ? " ENH" : "");
|
|
if (mmc->wr_rel_set & EXT_CSD_WR_DATA_REL_GP(i))
|
|
puts(" WRREL\n");
|
|
else
|
|
putc('\n');
|
|
}
|
|
}
|
|
ret = mmc_send_ext_csd(mmc, ext_csd);
|
|
if (ret)
|
|
return;
|
|
wp = ext_csd[EXT_CSD_BOOT_WP_STATUS];
|
|
for (i = 0; i < 2; ++i) {
|
|
printf("Boot area %d is ", i);
|
|
switch (wp & 3) {
|
|
case 0:
|
|
printf("not write protected\n");
|
|
break;
|
|
case 1:
|
|
printf("power on protected\n");
|
|
break;
|
|
case 2:
|
|
printf("permanently protected\n");
|
|
break;
|
|
default:
|
|
printf("in reserved protection state\n");
|
|
break;
|
|
}
|
|
wp >>= 2;
|
|
}
|
|
}
|
|
}
|
|
|
|
static struct mmc *__init_mmc_device(int dev, bool force_init,
|
|
enum bus_mode speed_mode)
|
|
{
|
|
struct mmc *mmc;
|
|
mmc = find_mmc_device(dev);
|
|
if (!mmc) {
|
|
printf("no mmc device at slot %x\n", dev);
|
|
return NULL;
|
|
}
|
|
|
|
if (!mmc_getcd(mmc))
|
|
force_init = true;
|
|
|
|
if (force_init)
|
|
mmc->has_init = 0;
|
|
|
|
if (IS_ENABLED(CONFIG_MMC_SPEED_MODE_SET))
|
|
mmc->user_speed_mode = speed_mode;
|
|
|
|
if (mmc_init(mmc))
|
|
return NULL;
|
|
|
|
#ifdef CONFIG_BLOCK_CACHE
|
|
struct blk_desc *bd = mmc_get_blk_desc(mmc);
|
|
blkcache_invalidate(bd->if_type, bd->devnum);
|
|
#endif
|
|
|
|
return mmc;
|
|
}
|
|
|
|
static struct mmc *init_mmc_device(int dev, bool force_init)
|
|
{
|
|
return __init_mmc_device(dev, force_init, MMC_MODES_END);
|
|
}
|
|
|
|
static int do_mmcinfo(struct cmd_tbl *cmdtp, int flag, int argc,
|
|
char *const argv[])
|
|
{
|
|
struct mmc *mmc;
|
|
|
|
if (curr_device < 0) {
|
|
if (get_mmc_num() > 0)
|
|
curr_device = 0;
|
|
else {
|
|
puts("No MMC device available\n");
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
mmc = init_mmc_device(curr_device, false);
|
|
if (!mmc)
|
|
return CMD_RET_FAILURE;
|
|
|
|
print_mmcinfo(mmc);
|
|
return CMD_RET_SUCCESS;
|
|
}
|
|
|
|
#if CONFIG_IS_ENABLED(CMD_MMC_RPMB)
|
|
static int confirm_key_prog(void)
|
|
{
|
|
puts("Warning: Programming authentication key can be done only once !\n"
|
|
" Use this command only if you are sure of what you are doing,\n"
|
|
"Really perform the key programming? <y/N> ");
|
|
if (confirm_yesno())
|
|
return 1;
|
|
|
|
puts("Authentication key programming aborted\n");
|
|
return 0;
|
|
}
|
|
|
|
static int do_mmcrpmb_key(struct cmd_tbl *cmdtp, int flag,
|
|
int argc, char *const argv[])
|
|
{
|
|
void *key_addr;
|
|
struct mmc *mmc = find_mmc_device(curr_device);
|
|
|
|
if (argc != 2)
|
|
return CMD_RET_USAGE;
|
|
|
|
key_addr = (void *)hextoul(argv[1], NULL);
|
|
if (!confirm_key_prog())
|
|
return CMD_RET_FAILURE;
|
|
if (mmc_rpmb_set_key(mmc, key_addr)) {
|
|
printf("ERROR - Key already programmed ?\n");
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
return CMD_RET_SUCCESS;
|
|
}
|
|
|
|
static int do_mmcrpmb_read(struct cmd_tbl *cmdtp, int flag,
|
|
int argc, char *const argv[])
|
|
{
|
|
u16 blk, cnt;
|
|
void *addr;
|
|
int n;
|
|
void *key_addr = NULL;
|
|
struct mmc *mmc = find_mmc_device(curr_device);
|
|
|
|
if (argc < 4)
|
|
return CMD_RET_USAGE;
|
|
|
|
addr = (void *)hextoul(argv[1], NULL);
|
|
blk = hextoul(argv[2], NULL);
|
|
cnt = hextoul(argv[3], NULL);
|
|
|
|
if (argc == 5)
|
|
key_addr = (void *)hextoul(argv[4], NULL);
|
|
|
|
printf("\nMMC RPMB read: dev # %d, block # %d, count %d ... ",
|
|
curr_device, blk, cnt);
|
|
n = mmc_rpmb_read(mmc, addr, blk, cnt, key_addr);
|
|
|
|
printf("%d RPMB blocks read: %s\n", n, (n == cnt) ? "OK" : "ERROR");
|
|
if (n != cnt)
|
|
return CMD_RET_FAILURE;
|
|
return CMD_RET_SUCCESS;
|
|
}
|
|
|
|
static int do_mmcrpmb_write(struct cmd_tbl *cmdtp, int flag,
|
|
int argc, char *const argv[])
|
|
{
|
|
u16 blk, cnt;
|
|
void *addr;
|
|
int n;
|
|
void *key_addr;
|
|
struct mmc *mmc = find_mmc_device(curr_device);
|
|
|
|
if (argc != 5)
|
|
return CMD_RET_USAGE;
|
|
|
|
addr = (void *)hextoul(argv[1], NULL);
|
|
blk = hextoul(argv[2], NULL);
|
|
cnt = hextoul(argv[3], NULL);
|
|
key_addr = (void *)hextoul(argv[4], NULL);
|
|
|
|
printf("\nMMC RPMB write: dev # %d, block # %d, count %d ... ",
|
|
curr_device, blk, cnt);
|
|
n = mmc_rpmb_write(mmc, addr, blk, cnt, key_addr);
|
|
|
|
printf("%d RPMB blocks written: %s\n", n, (n == cnt) ? "OK" : "ERROR");
|
|
if (n != cnt)
|
|
return CMD_RET_FAILURE;
|
|
return CMD_RET_SUCCESS;
|
|
}
|
|
|
|
static int do_mmcrpmb_counter(struct cmd_tbl *cmdtp, int flag,
|
|
int argc, char *const argv[])
|
|
{
|
|
unsigned long counter;
|
|
struct mmc *mmc = find_mmc_device(curr_device);
|
|
|
|
if (mmc_rpmb_get_counter(mmc, &counter))
|
|
return CMD_RET_FAILURE;
|
|
printf("RPMB Write counter= %lx\n", counter);
|
|
return CMD_RET_SUCCESS;
|
|
}
|
|
|
|
static struct cmd_tbl cmd_rpmb[] = {
|
|
U_BOOT_CMD_MKENT(key, 2, 0, do_mmcrpmb_key, "", ""),
|
|
U_BOOT_CMD_MKENT(read, 5, 1, do_mmcrpmb_read, "", ""),
|
|
U_BOOT_CMD_MKENT(write, 5, 0, do_mmcrpmb_write, "", ""),
|
|
U_BOOT_CMD_MKENT(counter, 1, 1, do_mmcrpmb_counter, "", ""),
|
|
};
|
|
|
|
static int do_mmcrpmb(struct cmd_tbl *cmdtp, int flag,
|
|
int argc, char *const argv[])
|
|
{
|
|
struct cmd_tbl *cp;
|
|
struct mmc *mmc;
|
|
char original_part;
|
|
int ret;
|
|
|
|
cp = find_cmd_tbl(argv[1], cmd_rpmb, ARRAY_SIZE(cmd_rpmb));
|
|
|
|
/* Drop the rpmb subcommand */
|
|
argc--;
|
|
argv++;
|
|
|
|
if (cp == NULL || argc > cp->maxargs)
|
|
return CMD_RET_USAGE;
|
|
if (flag == CMD_FLAG_REPEAT && !cmd_is_repeatable(cp))
|
|
return CMD_RET_SUCCESS;
|
|
|
|
mmc = init_mmc_device(curr_device, false);
|
|
if (!mmc)
|
|
return CMD_RET_FAILURE;
|
|
|
|
if (!(mmc->version & MMC_VERSION_MMC)) {
|
|
printf("It is not an eMMC device\n");
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
if (mmc->version < MMC_VERSION_4_41) {
|
|
printf("RPMB not supported before version 4.41\n");
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
/* Switch to the RPMB partition */
|
|
#ifndef CONFIG_BLK
|
|
original_part = mmc->block_dev.hwpart;
|
|
#else
|
|
original_part = mmc_get_blk_desc(mmc)->hwpart;
|
|
#endif
|
|
if (blk_select_hwpart_devnum(IF_TYPE_MMC, curr_device, MMC_PART_RPMB) !=
|
|
0)
|
|
return CMD_RET_FAILURE;
|
|
ret = cp->cmd(cmdtp, flag, argc, argv);
|
|
|
|
/* Return to original partition */
|
|
if (blk_select_hwpart_devnum(IF_TYPE_MMC, curr_device, original_part) !=
|
|
0)
|
|
return CMD_RET_FAILURE;
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
static int do_mmc_read(struct cmd_tbl *cmdtp, int flag,
|
|
int argc, char *const argv[])
|
|
{
|
|
struct mmc *mmc;
|
|
u32 blk, cnt, n;
|
|
void *addr;
|
|
|
|
if (argc != 4)
|
|
return CMD_RET_USAGE;
|
|
|
|
addr = (void *)hextoul(argv[1], NULL);
|
|
blk = hextoul(argv[2], NULL);
|
|
cnt = hextoul(argv[3], NULL);
|
|
|
|
mmc = init_mmc_device(curr_device, false);
|
|
if (!mmc)
|
|
return CMD_RET_FAILURE;
|
|
|
|
printf("\nMMC read: dev # %d, block # %d, count %d ... ",
|
|
curr_device, blk, cnt);
|
|
|
|
n = blk_dread(mmc_get_blk_desc(mmc), blk, cnt, addr);
|
|
printf("%d blocks read: %s\n", n, (n == cnt) ? "OK" : "ERROR");
|
|
|
|
return (n == cnt) ? CMD_RET_SUCCESS : CMD_RET_FAILURE;
|
|
}
|
|
|
|
#if CONFIG_IS_ENABLED(CMD_MMC_SWRITE)
|
|
static lbaint_t mmc_sparse_write(struct sparse_storage *info, lbaint_t blk,
|
|
lbaint_t blkcnt, const void *buffer)
|
|
{
|
|
struct blk_desc *dev_desc = info->priv;
|
|
|
|
return blk_dwrite(dev_desc, blk, blkcnt, buffer);
|
|
}
|
|
|
|
static lbaint_t mmc_sparse_reserve(struct sparse_storage *info,
|
|
lbaint_t blk, lbaint_t blkcnt)
|
|
{
|
|
return blkcnt;
|
|
}
|
|
|
|
static int do_mmc_sparse_write(struct cmd_tbl *cmdtp, int flag,
|
|
int argc, char *const argv[])
|
|
{
|
|
struct sparse_storage sparse;
|
|
struct blk_desc *dev_desc;
|
|
struct mmc *mmc;
|
|
char dest[11];
|
|
void *addr;
|
|
u32 blk;
|
|
|
|
if (argc != 3)
|
|
return CMD_RET_USAGE;
|
|
|
|
addr = (void *)hextoul(argv[1], NULL);
|
|
blk = hextoul(argv[2], NULL);
|
|
|
|
if (!is_sparse_image(addr)) {
|
|
printf("Not a sparse image\n");
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
|
|
mmc = init_mmc_device(curr_device, false);
|
|
if (!mmc)
|
|
return CMD_RET_FAILURE;
|
|
|
|
printf("\nMMC Sparse write: dev # %d, block # %d ... ",
|
|
curr_device, blk);
|
|
|
|
if (mmc_getwp(mmc) == 1) {
|
|
printf("Error: card is write protected!\n");
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
|
|
dev_desc = mmc_get_blk_desc(mmc);
|
|
sparse.priv = dev_desc;
|
|
sparse.blksz = 512;
|
|
sparse.start = blk;
|
|
sparse.size = dev_desc->lba - blk;
|
|
sparse.write = mmc_sparse_write;
|
|
sparse.reserve = mmc_sparse_reserve;
|
|
sparse.mssg = NULL;
|
|
sprintf(dest, "0x" LBAF, sparse.start * sparse.blksz);
|
|
|
|
if (write_sparse_image(&sparse, dest, addr, NULL))
|
|
return CMD_RET_FAILURE;
|
|
else
|
|
return CMD_RET_SUCCESS;
|
|
}
|
|
#endif
|
|
|
|
#if CONFIG_IS_ENABLED(MMC_WRITE)
|
|
static int do_mmc_write(struct cmd_tbl *cmdtp, int flag,
|
|
int argc, char *const argv[])
|
|
{
|
|
struct mmc *mmc;
|
|
u32 blk, cnt, n;
|
|
void *addr;
|
|
|
|
if (argc != 4)
|
|
return CMD_RET_USAGE;
|
|
|
|
addr = (void *)hextoul(argv[1], NULL);
|
|
blk = hextoul(argv[2], NULL);
|
|
cnt = hextoul(argv[3], NULL);
|
|
|
|
mmc = init_mmc_device(curr_device, false);
|
|
if (!mmc)
|
|
return CMD_RET_FAILURE;
|
|
|
|
printf("\nMMC write: dev # %d, block # %d, count %d ... ",
|
|
curr_device, blk, cnt);
|
|
|
|
if (mmc_getwp(mmc) == 1) {
|
|
printf("Error: card is write protected!\n");
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
n = blk_dwrite(mmc_get_blk_desc(mmc), blk, cnt, addr);
|
|
printf("%d blocks written: %s\n", n, (n == cnt) ? "OK" : "ERROR");
|
|
|
|
return (n == cnt) ? CMD_RET_SUCCESS : CMD_RET_FAILURE;
|
|
}
|
|
|
|
static int do_mmc_erase(struct cmd_tbl *cmdtp, int flag,
|
|
int argc, char *const argv[])
|
|
{
|
|
struct mmc *mmc;
|
|
u32 blk, cnt, n;
|
|
|
|
if (argc != 3)
|
|
return CMD_RET_USAGE;
|
|
|
|
blk = hextoul(argv[1], NULL);
|
|
cnt = hextoul(argv[2], NULL);
|
|
|
|
mmc = init_mmc_device(curr_device, false);
|
|
if (!mmc)
|
|
return CMD_RET_FAILURE;
|
|
|
|
printf("\nMMC erase: dev # %d, block # %d, count %d ... ",
|
|
curr_device, blk, cnt);
|
|
|
|
if (mmc_getwp(mmc) == 1) {
|
|
printf("Error: card is write protected!\n");
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
n = blk_derase(mmc_get_blk_desc(mmc), blk, cnt);
|
|
printf("%d blocks erased: %s\n", n, (n == cnt) ? "OK" : "ERROR");
|
|
|
|
return (n == cnt) ? CMD_RET_SUCCESS : CMD_RET_FAILURE;
|
|
}
|
|
#endif
|
|
|
|
static int do_mmc_rescan(struct cmd_tbl *cmdtp, int flag,
|
|
int argc, char *const argv[])
|
|
{
|
|
struct mmc *mmc;
|
|
enum bus_mode speed_mode = MMC_MODES_END;
|
|
|
|
if (argc == 1) {
|
|
mmc = init_mmc_device(curr_device, true);
|
|
} else if (argc == 2) {
|
|
speed_mode = (int)dectoul(argv[1], NULL);
|
|
mmc = __init_mmc_device(curr_device, true, speed_mode);
|
|
} else {
|
|
return CMD_RET_USAGE;
|
|
}
|
|
|
|
if (!mmc)
|
|
return CMD_RET_FAILURE;
|
|
|
|
return CMD_RET_SUCCESS;
|
|
}
|
|
|
|
static int do_mmc_part(struct cmd_tbl *cmdtp, int flag,
|
|
int argc, char *const argv[])
|
|
{
|
|
struct blk_desc *mmc_dev;
|
|
struct mmc *mmc;
|
|
|
|
mmc = init_mmc_device(curr_device, false);
|
|
if (!mmc)
|
|
return CMD_RET_FAILURE;
|
|
|
|
mmc_dev = blk_get_devnum_by_type(IF_TYPE_MMC, curr_device);
|
|
if (mmc_dev != NULL && mmc_dev->type != DEV_TYPE_UNKNOWN) {
|
|
part_print(mmc_dev);
|
|
return CMD_RET_SUCCESS;
|
|
}
|
|
|
|
puts("get mmc type error!\n");
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
|
|
static int do_mmc_dev(struct cmd_tbl *cmdtp, int flag,
|
|
int argc, char *const argv[])
|
|
{
|
|
int dev, part = 0, ret;
|
|
struct mmc *mmc;
|
|
enum bus_mode speed_mode = MMC_MODES_END;
|
|
|
|
if (argc == 1) {
|
|
dev = curr_device;
|
|
mmc = init_mmc_device(dev, true);
|
|
} else if (argc == 2) {
|
|
dev = (int)dectoul(argv[1], NULL);
|
|
mmc = init_mmc_device(dev, true);
|
|
} else if (argc == 3) {
|
|
dev = (int)dectoul(argv[1], NULL);
|
|
part = (int)dectoul(argv[2], NULL);
|
|
if (part > PART_ACCESS_MASK) {
|
|
printf("#part_num shouldn't be larger than %d\n",
|
|
PART_ACCESS_MASK);
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
mmc = init_mmc_device(dev, true);
|
|
} else if (argc == 4) {
|
|
dev = (int)dectoul(argv[1], NULL);
|
|
part = (int)dectoul(argv[2], NULL);
|
|
if (part > PART_ACCESS_MASK) {
|
|
printf("#part_num shouldn't be larger than %d\n",
|
|
PART_ACCESS_MASK);
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
speed_mode = (int)dectoul(argv[3], NULL);
|
|
mmc = __init_mmc_device(dev, true, speed_mode);
|
|
} else {
|
|
return CMD_RET_USAGE;
|
|
}
|
|
|
|
if (!mmc)
|
|
return CMD_RET_FAILURE;
|
|
|
|
ret = blk_select_hwpart_devnum(IF_TYPE_MMC, dev, part);
|
|
printf("switch to partitions #%d, %s\n",
|
|
part, (!ret) ? "OK" : "ERROR");
|
|
if (ret)
|
|
return 1;
|
|
|
|
curr_device = dev;
|
|
if (mmc->part_config == MMCPART_NOAVAILABLE)
|
|
printf("mmc%d is current device\n", curr_device);
|
|
else
|
|
printf("mmc%d(part %d) is current device\n",
|
|
curr_device, mmc_get_blk_desc(mmc)->hwpart);
|
|
|
|
return CMD_RET_SUCCESS;
|
|
}
|
|
|
|
static int do_mmc_list(struct cmd_tbl *cmdtp, int flag,
|
|
int argc, char *const argv[])
|
|
{
|
|
print_mmc_devices('\n');
|
|
return CMD_RET_SUCCESS;
|
|
}
|
|
|
|
#if CONFIG_IS_ENABLED(MMC_HW_PARTITIONING)
|
|
static void parse_hwpart_user_enh_size(struct mmc *mmc,
|
|
struct mmc_hwpart_conf *pconf,
|
|
char *argv)
|
|
{
|
|
int i, ret;
|
|
|
|
pconf->user.enh_size = 0;
|
|
|
|
if (!strcmp(argv, "-")) { /* The rest of eMMC */
|
|
ALLOC_CACHE_ALIGN_BUFFER(u8, ext_csd, MMC_MAX_BLOCK_LEN);
|
|
ret = mmc_send_ext_csd(mmc, ext_csd);
|
|
if (ret)
|
|
return;
|
|
/* The enh_size value is in 512B block units */
|
|
pconf->user.enh_size =
|
|
((ext_csd[EXT_CSD_MAX_ENH_SIZE_MULT + 2] << 16) +
|
|
(ext_csd[EXT_CSD_MAX_ENH_SIZE_MULT + 1] << 8) +
|
|
ext_csd[EXT_CSD_MAX_ENH_SIZE_MULT]) * 1024 *
|
|
ext_csd[EXT_CSD_HC_ERASE_GRP_SIZE] *
|
|
ext_csd[EXT_CSD_HC_WP_GRP_SIZE];
|
|
pconf->user.enh_size -= pconf->user.enh_start;
|
|
for (i = 0; i < ARRAY_SIZE(mmc->capacity_gp); i++) {
|
|
/*
|
|
* If the eMMC already has GP partitions set,
|
|
* subtract their size from the maximum USER
|
|
* partition size.
|
|
*
|
|
* Else, if the command was used to configure new
|
|
* GP partitions, subtract their size from maximum
|
|
* USER partition size.
|
|
*/
|
|
if (mmc->capacity_gp[i]) {
|
|
/* The capacity_gp is in 1B units */
|
|
pconf->user.enh_size -= mmc->capacity_gp[i] >> 9;
|
|
} else if (pconf->gp_part[i].size) {
|
|
/* The gp_part[].size is in 512B units */
|
|
pconf->user.enh_size -= pconf->gp_part[i].size;
|
|
}
|
|
}
|
|
} else {
|
|
pconf->user.enh_size = dectoul(argv, NULL);
|
|
}
|
|
}
|
|
|
|
static int parse_hwpart_user(struct mmc *mmc, struct mmc_hwpart_conf *pconf,
|
|
int argc, char *const argv[])
|
|
{
|
|
int i = 0;
|
|
|
|
memset(&pconf->user, 0, sizeof(pconf->user));
|
|
|
|
while (i < argc) {
|
|
if (!strcmp(argv[i], "enh")) {
|
|
if (i + 2 >= argc)
|
|
return -1;
|
|
pconf->user.enh_start =
|
|
dectoul(argv[i + 1], NULL);
|
|
parse_hwpart_user_enh_size(mmc, pconf, argv[i + 2]);
|
|
i += 3;
|
|
} else if (!strcmp(argv[i], "wrrel")) {
|
|
if (i + 1 >= argc)
|
|
return -1;
|
|
pconf->user.wr_rel_change = 1;
|
|
if (!strcmp(argv[i+1], "on"))
|
|
pconf->user.wr_rel_set = 1;
|
|
else if (!strcmp(argv[i+1], "off"))
|
|
pconf->user.wr_rel_set = 0;
|
|
else
|
|
return -1;
|
|
i += 2;
|
|
} else {
|
|
break;
|
|
}
|
|
}
|
|
return i;
|
|
}
|
|
|
|
static int parse_hwpart_gp(struct mmc_hwpart_conf *pconf, int pidx,
|
|
int argc, char *const argv[])
|
|
{
|
|
int i;
|
|
|
|
memset(&pconf->gp_part[pidx], 0, sizeof(pconf->gp_part[pidx]));
|
|
|
|
if (1 >= argc)
|
|
return -1;
|
|
pconf->gp_part[pidx].size = dectoul(argv[0], NULL);
|
|
|
|
i = 1;
|
|
while (i < argc) {
|
|
if (!strcmp(argv[i], "enh")) {
|
|
pconf->gp_part[pidx].enhanced = 1;
|
|
i += 1;
|
|
} else if (!strcmp(argv[i], "wrrel")) {
|
|
if (i + 1 >= argc)
|
|
return -1;
|
|
pconf->gp_part[pidx].wr_rel_change = 1;
|
|
if (!strcmp(argv[i+1], "on"))
|
|
pconf->gp_part[pidx].wr_rel_set = 1;
|
|
else if (!strcmp(argv[i+1], "off"))
|
|
pconf->gp_part[pidx].wr_rel_set = 0;
|
|
else
|
|
return -1;
|
|
i += 2;
|
|
} else {
|
|
break;
|
|
}
|
|
}
|
|
return i;
|
|
}
|
|
|
|
static int do_mmc_hwpartition(struct cmd_tbl *cmdtp, int flag,
|
|
int argc, char *const argv[])
|
|
{
|
|
struct mmc *mmc;
|
|
struct mmc_hwpart_conf pconf = { };
|
|
enum mmc_hwpart_conf_mode mode = MMC_HWPART_CONF_CHECK;
|
|
int i, r, pidx;
|
|
|
|
mmc = init_mmc_device(curr_device, false);
|
|
if (!mmc)
|
|
return CMD_RET_FAILURE;
|
|
|
|
if (IS_SD(mmc)) {
|
|
puts("SD doesn't support partitioning\n");
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
|
|
if (argc < 1)
|
|
return CMD_RET_USAGE;
|
|
i = 1;
|
|
while (i < argc) {
|
|
if (!strcmp(argv[i], "user")) {
|
|
i++;
|
|
r = parse_hwpart_user(mmc, &pconf, argc - i, &argv[i]);
|
|
if (r < 0)
|
|
return CMD_RET_USAGE;
|
|
i += r;
|
|
} else if (!strncmp(argv[i], "gp", 2) &&
|
|
strlen(argv[i]) == 3 &&
|
|
argv[i][2] >= '1' && argv[i][2] <= '4') {
|
|
pidx = argv[i][2] - '1';
|
|
i++;
|
|
r = parse_hwpart_gp(&pconf, pidx, argc-i, &argv[i]);
|
|
if (r < 0)
|
|
return CMD_RET_USAGE;
|
|
i += r;
|
|
} else if (!strcmp(argv[i], "check")) {
|
|
mode = MMC_HWPART_CONF_CHECK;
|
|
i++;
|
|
} else if (!strcmp(argv[i], "set")) {
|
|
mode = MMC_HWPART_CONF_SET;
|
|
i++;
|
|
} else if (!strcmp(argv[i], "complete")) {
|
|
mode = MMC_HWPART_CONF_COMPLETE;
|
|
i++;
|
|
} else {
|
|
return CMD_RET_USAGE;
|
|
}
|
|
}
|
|
|
|
puts("Partition configuration:\n");
|
|
if (pconf.user.enh_size) {
|
|
puts("\tUser Enhanced Start: ");
|
|
print_size(((u64)pconf.user.enh_start) << 9, "\n");
|
|
puts("\tUser Enhanced Size: ");
|
|
print_size(((u64)pconf.user.enh_size) << 9, "\n");
|
|
} else {
|
|
puts("\tNo enhanced user data area\n");
|
|
}
|
|
if (pconf.user.wr_rel_change)
|
|
printf("\tUser partition write reliability: %s\n",
|
|
pconf.user.wr_rel_set ? "on" : "off");
|
|
for (pidx = 0; pidx < 4; pidx++) {
|
|
if (pconf.gp_part[pidx].size) {
|
|
printf("\tGP%i Capacity: ", pidx+1);
|
|
print_size(((u64)pconf.gp_part[pidx].size) << 9,
|
|
pconf.gp_part[pidx].enhanced ?
|
|
" ENH\n" : "\n");
|
|
} else {
|
|
printf("\tNo GP%i partition\n", pidx+1);
|
|
}
|
|
if (pconf.gp_part[pidx].wr_rel_change)
|
|
printf("\tGP%i write reliability: %s\n", pidx+1,
|
|
pconf.gp_part[pidx].wr_rel_set ? "on" : "off");
|
|
}
|
|
|
|
if (!mmc_hwpart_config(mmc, &pconf, mode)) {
|
|
if (mode == MMC_HWPART_CONF_COMPLETE)
|
|
puts("Partitioning successful, "
|
|
"power-cycle to make effective\n");
|
|
return CMD_RET_SUCCESS;
|
|
} else {
|
|
puts("Failed!\n");
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
#ifdef CONFIG_SUPPORT_EMMC_BOOT
|
|
static int do_mmc_bootbus(struct cmd_tbl *cmdtp, int flag,
|
|
int argc, char *const argv[])
|
|
{
|
|
int dev;
|
|
struct mmc *mmc;
|
|
u8 width, reset, mode;
|
|
|
|
if (argc != 5)
|
|
return CMD_RET_USAGE;
|
|
dev = dectoul(argv[1], NULL);
|
|
width = dectoul(argv[2], NULL);
|
|
reset = dectoul(argv[3], NULL);
|
|
mode = dectoul(argv[4], NULL);
|
|
|
|
mmc = init_mmc_device(dev, false);
|
|
if (!mmc)
|
|
return CMD_RET_FAILURE;
|
|
|
|
if (IS_SD(mmc)) {
|
|
puts("BOOT_BUS_WIDTH only exists on eMMC\n");
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
|
|
/*
|
|
* BOOT_BUS_CONDITIONS[177]
|
|
* BOOT_MODE[4:3]
|
|
* 0x0 : Use SDR + Backward compatible timing in boot operation
|
|
* 0x1 : Use SDR + High Speed Timing in boot operation mode
|
|
* 0x2 : Use DDR in boot operation
|
|
* RESET_BOOT_BUS_CONDITIONS
|
|
* 0x0 : Reset bus width to x1, SDR, Backward compatible
|
|
* 0x1 : Retain BOOT_BUS_WIDTH and BOOT_MODE
|
|
* BOOT_BUS_WIDTH
|
|
* 0x0 : x1(sdr) or x4 (ddr) buswidth
|
|
* 0x1 : x4(sdr/ddr) buswith
|
|
* 0x2 : x8(sdr/ddr) buswith
|
|
*
|
|
*/
|
|
if (width >= 0x3) {
|
|
printf("boot_bus_width %d is invalid\n", width);
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
|
|
if (reset >= 0x2) {
|
|
printf("reset_boot_bus_width %d is invalid\n", reset);
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
|
|
if (mode >= 0x3) {
|
|
printf("reset_boot_bus_width %d is invalid\n", mode);
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
|
|
/* acknowledge to be sent during boot operation */
|
|
if (mmc_set_boot_bus_width(mmc, width, reset, mode)) {
|
|
puts("BOOT_BUS_WIDTH is failed to change.\n");
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
|
|
printf("Set to BOOT_BUS_WIDTH = 0x%x, RESET = 0x%x, BOOT_MODE = 0x%x\n",
|
|
width, reset, mode);
|
|
return CMD_RET_SUCCESS;
|
|
}
|
|
|
|
static int do_mmc_boot_resize(struct cmd_tbl *cmdtp, int flag,
|
|
int argc, char *const argv[])
|
|
{
|
|
int dev;
|
|
struct mmc *mmc;
|
|
u32 bootsize, rpmbsize;
|
|
|
|
if (argc != 4)
|
|
return CMD_RET_USAGE;
|
|
dev = dectoul(argv[1], NULL);
|
|
bootsize = dectoul(argv[2], NULL);
|
|
rpmbsize = dectoul(argv[3], NULL);
|
|
|
|
mmc = init_mmc_device(dev, false);
|
|
if (!mmc)
|
|
return CMD_RET_FAILURE;
|
|
|
|
if (IS_SD(mmc)) {
|
|
printf("It is not an eMMC device\n");
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
|
|
if (mmc_boot_partition_size_change(mmc, bootsize, rpmbsize)) {
|
|
printf("EMMC boot partition Size change Failed.\n");
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
|
|
printf("EMMC boot partition Size %d MB\n", bootsize);
|
|
printf("EMMC RPMB partition Size %d MB\n", rpmbsize);
|
|
return CMD_RET_SUCCESS;
|
|
}
|
|
|
|
static int mmc_partconf_print(struct mmc *mmc, const char *varname)
|
|
{
|
|
u8 ack, access, part;
|
|
|
|
if (mmc->part_config == MMCPART_NOAVAILABLE) {
|
|
printf("No part_config info for ver. 0x%x\n", mmc->version);
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
|
|
access = EXT_CSD_EXTRACT_PARTITION_ACCESS(mmc->part_config);
|
|
ack = EXT_CSD_EXTRACT_BOOT_ACK(mmc->part_config);
|
|
part = EXT_CSD_EXTRACT_BOOT_PART(mmc->part_config);
|
|
|
|
if(varname)
|
|
env_set_hex(varname, part);
|
|
|
|
printf("EXT_CSD[179], PARTITION_CONFIG:\n"
|
|
"BOOT_ACK: 0x%x\n"
|
|
"BOOT_PARTITION_ENABLE: 0x%x\n"
|
|
"PARTITION_ACCESS: 0x%x\n", ack, part, access);
|
|
|
|
return CMD_RET_SUCCESS;
|
|
}
|
|
|
|
static int do_mmc_partconf(struct cmd_tbl *cmdtp, int flag,
|
|
int argc, char *const argv[])
|
|
{
|
|
int dev;
|
|
struct mmc *mmc;
|
|
u8 ack, part_num, access;
|
|
|
|
if (argc != 2 && argc != 3 && argc != 5)
|
|
return CMD_RET_USAGE;
|
|
|
|
dev = dectoul(argv[1], NULL);
|
|
|
|
mmc = init_mmc_device(dev, false);
|
|
if (!mmc)
|
|
return CMD_RET_FAILURE;
|
|
|
|
if (IS_SD(mmc)) {
|
|
puts("PARTITION_CONFIG only exists on eMMC\n");
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
|
|
if (argc == 2 || argc == 3)
|
|
return mmc_partconf_print(mmc, argc == 3 ? argv[2] : NULL);
|
|
|
|
ack = dectoul(argv[2], NULL);
|
|
part_num = dectoul(argv[3], NULL);
|
|
access = dectoul(argv[4], NULL);
|
|
|
|
/* acknowledge to be sent during boot operation */
|
|
return mmc_set_part_conf(mmc, ack, part_num, access);
|
|
}
|
|
|
|
static int do_mmc_rst_func(struct cmd_tbl *cmdtp, int flag,
|
|
int argc, char *const argv[])
|
|
{
|
|
int dev;
|
|
struct mmc *mmc;
|
|
u8 enable;
|
|
|
|
/*
|
|
* Set the RST_n_ENABLE bit of RST_n_FUNCTION
|
|
* The only valid values are 0x0, 0x1 and 0x2 and writing
|
|
* a value of 0x1 or 0x2 sets the value permanently.
|
|
*/
|
|
if (argc != 3)
|
|
return CMD_RET_USAGE;
|
|
|
|
dev = dectoul(argv[1], NULL);
|
|
enable = dectoul(argv[2], NULL);
|
|
|
|
if (enable > 2) {
|
|
puts("Invalid RST_n_ENABLE value\n");
|
|
return CMD_RET_USAGE;
|
|
}
|
|
|
|
mmc = init_mmc_device(dev, false);
|
|
if (!mmc)
|
|
return CMD_RET_FAILURE;
|
|
|
|
if (IS_SD(mmc)) {
|
|
puts("RST_n_FUNCTION only exists on eMMC\n");
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
|
|
return mmc_set_rst_n_function(mmc, enable);
|
|
}
|
|
#endif
|
|
static int do_mmc_setdsr(struct cmd_tbl *cmdtp, int flag,
|
|
int argc, char *const argv[])
|
|
{
|
|
struct mmc *mmc;
|
|
u32 val;
|
|
int ret;
|
|
|
|
if (argc != 2)
|
|
return CMD_RET_USAGE;
|
|
val = hextoul(argv[1], NULL);
|
|
|
|
mmc = find_mmc_device(curr_device);
|
|
if (!mmc) {
|
|
printf("no mmc device at slot %x\n", curr_device);
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
ret = mmc_set_dsr(mmc, val);
|
|
printf("set dsr %s\n", (!ret) ? "OK, force rescan" : "ERROR");
|
|
if (!ret) {
|
|
mmc->has_init = 0;
|
|
if (mmc_init(mmc))
|
|
return CMD_RET_FAILURE;
|
|
else
|
|
return CMD_RET_SUCCESS;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
#ifdef CONFIG_CMD_BKOPS_ENABLE
|
|
static int do_mmc_bkops_enable(struct cmd_tbl *cmdtp, int flag,
|
|
int argc, char *const argv[])
|
|
{
|
|
int dev;
|
|
struct mmc *mmc;
|
|
|
|
if (argc != 2)
|
|
return CMD_RET_USAGE;
|
|
|
|
dev = dectoul(argv[1], NULL);
|
|
|
|
mmc = init_mmc_device(dev, false);
|
|
if (!mmc)
|
|
return CMD_RET_FAILURE;
|
|
|
|
if (IS_SD(mmc)) {
|
|
puts("BKOPS_EN only exists on eMMC\n");
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
|
|
return mmc_set_bkops_enable(mmc);
|
|
}
|
|
#endif
|
|
|
|
static int do_mmc_boot_wp(struct cmd_tbl *cmdtp, int flag,
|
|
int argc, char * const argv[])
|
|
{
|
|
int err;
|
|
struct mmc *mmc;
|
|
|
|
mmc = init_mmc_device(curr_device, false);
|
|
if (!mmc)
|
|
return CMD_RET_FAILURE;
|
|
if (IS_SD(mmc)) {
|
|
printf("It is not an eMMC device\n");
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
err = mmc_boot_wp(mmc);
|
|
if (err)
|
|
return CMD_RET_FAILURE;
|
|
printf("boot areas protected\n");
|
|
return CMD_RET_SUCCESS;
|
|
}
|
|
|
|
static struct cmd_tbl cmd_mmc[] = {
|
|
U_BOOT_CMD_MKENT(info, 1, 0, do_mmcinfo, "", ""),
|
|
U_BOOT_CMD_MKENT(read, 4, 1, do_mmc_read, "", ""),
|
|
U_BOOT_CMD_MKENT(wp, 1, 0, do_mmc_boot_wp, "", ""),
|
|
#if CONFIG_IS_ENABLED(MMC_WRITE)
|
|
U_BOOT_CMD_MKENT(write, 4, 0, do_mmc_write, "", ""),
|
|
U_BOOT_CMD_MKENT(erase, 3, 0, do_mmc_erase, "", ""),
|
|
#endif
|
|
#if CONFIG_IS_ENABLED(CMD_MMC_SWRITE)
|
|
U_BOOT_CMD_MKENT(swrite, 3, 0, do_mmc_sparse_write, "", ""),
|
|
#endif
|
|
U_BOOT_CMD_MKENT(rescan, 2, 1, do_mmc_rescan, "", ""),
|
|
U_BOOT_CMD_MKENT(part, 1, 1, do_mmc_part, "", ""),
|
|
U_BOOT_CMD_MKENT(dev, 4, 0, do_mmc_dev, "", ""),
|
|
U_BOOT_CMD_MKENT(list, 1, 1, do_mmc_list, "", ""),
|
|
#if CONFIG_IS_ENABLED(MMC_HW_PARTITIONING)
|
|
U_BOOT_CMD_MKENT(hwpartition, 28, 0, do_mmc_hwpartition, "", ""),
|
|
#endif
|
|
#ifdef CONFIG_SUPPORT_EMMC_BOOT
|
|
U_BOOT_CMD_MKENT(bootbus, 5, 0, do_mmc_bootbus, "", ""),
|
|
U_BOOT_CMD_MKENT(bootpart-resize, 4, 0, do_mmc_boot_resize, "", ""),
|
|
U_BOOT_CMD_MKENT(partconf, 5, 0, do_mmc_partconf, "", ""),
|
|
U_BOOT_CMD_MKENT(rst-function, 3, 0, do_mmc_rst_func, "", ""),
|
|
#endif
|
|
#if CONFIG_IS_ENABLED(CMD_MMC_RPMB)
|
|
U_BOOT_CMD_MKENT(rpmb, CONFIG_SYS_MAXARGS, 1, do_mmcrpmb, "", ""),
|
|
#endif
|
|
U_BOOT_CMD_MKENT(setdsr, 2, 0, do_mmc_setdsr, "", ""),
|
|
#ifdef CONFIG_CMD_BKOPS_ENABLE
|
|
U_BOOT_CMD_MKENT(bkops-enable, 2, 0, do_mmc_bkops_enable, "", ""),
|
|
#endif
|
|
};
|
|
|
|
static int do_mmcops(struct cmd_tbl *cmdtp, int flag, int argc,
|
|
char *const argv[])
|
|
{
|
|
struct cmd_tbl *cp;
|
|
|
|
cp = find_cmd_tbl(argv[1], cmd_mmc, ARRAY_SIZE(cmd_mmc));
|
|
|
|
/* Drop the mmc command */
|
|
argc--;
|
|
argv++;
|
|
|
|
if (cp == NULL || argc > cp->maxargs)
|
|
return CMD_RET_USAGE;
|
|
if (flag == CMD_FLAG_REPEAT && !cmd_is_repeatable(cp))
|
|
return CMD_RET_SUCCESS;
|
|
|
|
if (curr_device < 0) {
|
|
if (get_mmc_num() > 0) {
|
|
curr_device = 0;
|
|
} else {
|
|
puts("No MMC device available\n");
|
|
return CMD_RET_FAILURE;
|
|
}
|
|
}
|
|
return cp->cmd(cmdtp, flag, argc, argv);
|
|
}
|
|
|
|
U_BOOT_CMD(
|
|
mmc, 29, 1, do_mmcops,
|
|
"MMC sub system",
|
|
"info - display info of the current MMC device\n"
|
|
"mmc read addr blk# cnt\n"
|
|
"mmc write addr blk# cnt\n"
|
|
#if CONFIG_IS_ENABLED(CMD_MMC_SWRITE)
|
|
"mmc swrite addr blk#\n"
|
|
#endif
|
|
"mmc erase blk# cnt\n"
|
|
"mmc rescan [mode]\n"
|
|
"mmc part - lists available partition on current mmc device\n"
|
|
"mmc dev [dev] [part] [mode] - show or set current mmc device [partition] and set mode\n"
|
|
" - the required speed mode is passed as the index from the following list\n"
|
|
" [MMC_LEGACY, MMC_HS, SD_HS, MMC_HS_52, MMC_DDR_52, UHS_SDR12, UHS_SDR25,\n"
|
|
" UHS_SDR50, UHS_DDR50, UHS_SDR104, MMC_HS_200, MMC_HS_400, MMC_HS_400_ES]\n"
|
|
"mmc list - lists available devices\n"
|
|
"mmc wp - power on write protect boot partitions\n"
|
|
#if CONFIG_IS_ENABLED(MMC_HW_PARTITIONING)
|
|
"mmc hwpartition <USER> <GP> <MODE> - does hardware partitioning\n"
|
|
" arguments (sizes in 512-byte blocks):\n"
|
|
" USER - <user> <enh> <start> <cnt> <wrrel> <{on|off}>\n"
|
|
" : sets user data area attributes\n"
|
|
" GP - <{gp1|gp2|gp3|gp4}> <cnt> <enh> <wrrel> <{on|off}>\n"
|
|
" : general purpose partition\n"
|
|
" MODE - <{check|set|complete}>\n"
|
|
" : mode, complete set partitioning completed\n"
|
|
" WARNING: Partitioning is a write-once setting once it is set to complete.\n"
|
|
" Power cycling is required to initialize partitions after set to complete.\n"
|
|
#endif
|
|
#ifdef CONFIG_SUPPORT_EMMC_BOOT
|
|
"mmc bootbus <dev> <boot_bus_width> <reset_boot_bus_width> <boot_mode>\n"
|
|
" - Set the BOOT_BUS_WIDTH field of the specified device\n"
|
|
"mmc bootpart-resize <dev> <boot part size MB> <RPMB part size MB>\n"
|
|
" - Change sizes of boot and RPMB partitions of specified device\n"
|
|
"mmc partconf <dev> [[varname] | [<boot_ack> <boot_partition> <partition_access>]]\n"
|
|
" - Show or change the bits of the PARTITION_CONFIG field of the specified device\n"
|
|
" If showing the bits, optionally store the boot_partition field into varname\n"
|
|
"mmc rst-function <dev> <value>\n"
|
|
" - Change the RST_n_FUNCTION field of the specified device\n"
|
|
" WARNING: This is a write-once field and 0 / 1 / 2 are the only valid values.\n"
|
|
#endif
|
|
#if CONFIG_IS_ENABLED(CMD_MMC_RPMB)
|
|
"mmc rpmb read addr blk# cnt [address of auth-key] - block size is 256 bytes\n"
|
|
"mmc rpmb write addr blk# cnt <address of auth-key> - block size is 256 bytes\n"
|
|
"mmc rpmb key <address of auth-key> - program the RPMB authentication key.\n"
|
|
"mmc rpmb counter - read the value of the write counter\n"
|
|
#endif
|
|
"mmc setdsr <value> - set DSR register value\n"
|
|
#ifdef CONFIG_CMD_BKOPS_ENABLE
|
|
"mmc bkops-enable <dev> - enable background operations handshake on device\n"
|
|
" WARNING: This is a write-once setting.\n"
|
|
#endif
|
|
);
|
|
|
|
/* Old command kept for compatibility. Same as 'mmc info' */
|
|
U_BOOT_CMD(
|
|
mmcinfo, 1, 0, do_mmcinfo,
|
|
"display MMC info",
|
|
"- display info of the current MMC device"
|
|
);
|