mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-23 03:23:47 +00:00
b1f1b4a5a5
Chances are when one boots U-Boot proper from a given storage medium, they want the same medium to be used to load and store the environment. This basically allows to have completely separate U-Boot (TPL/SPL/U-Boot proper/environment) per storage medium which is convenient when working with recovery from SD-Card as one would just need to insert a properly configured SD-Card into the device to have access to their whole debug setup. No fallback mechanism is provided as to not dirty other storage medium environment by mistake. However, since arch_env_get_location() is called by env_init() which is part of the pre-relocation process, a valid, non-ENVL_UNKNOWN, value shall be returned otherwise the relocation fails with the following message: initcall sequence 00000000002866c0 failed at call 0000000000256b34 (err=-19) This valid, non-ENVL_UNKNOWN, value is ENVL_NOWHERE which requires to always select CONFIG_ENV_IS_NOWHERE otherwise this work-around does not work. Cc: Quentin Schulz <foss+uboot@0leil.net> Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
198 lines
4.8 KiB
C
198 lines
4.8 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <env.h>
|
|
#include <env_internal.h>
|
|
#include <init.h>
|
|
#include <log.h>
|
|
#include <misc.h>
|
|
#include <spl.h>
|
|
#include <syscon.h>
|
|
#include <u-boot/crc.h>
|
|
#include <usb.h>
|
|
#include <dm/pinctrl.h>
|
|
#include <dm/uclass-internal.h>
|
|
#include <asm/io.h>
|
|
#include <asm/setup.h>
|
|
#include <asm/arch-rockchip/clock.h>
|
|
#include <asm/arch-rockchip/hardware.h>
|
|
#include <asm/arch-rockchip/grf_rk3399.h>
|
|
#include <asm/arch-rockchip/periph.h>
|
|
#include <asm/arch-rockchip/misc.h>
|
|
#include <power/regulator.h>
|
|
#include <u-boot/sha256.h>
|
|
|
|
static void setup_iodomain(void)
|
|
{
|
|
const u32 GRF_IO_VSEL_GPIO4CD_SHIFT = 3;
|
|
struct rk3399_grf_regs *grf =
|
|
syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
|
|
|
|
/*
|
|
* Set bit 3 in GRF_IO_VSEL so PCIE_RST# works (pin GPIO4_C6).
|
|
* Linux assumes that PCIE_RST# works out of the box as it probes
|
|
* PCIe before loading the iodomain driver.
|
|
*/
|
|
rk_setreg(&grf->io_vsel, 1 << GRF_IO_VSEL_GPIO4CD_SHIFT);
|
|
}
|
|
|
|
/*
|
|
* Swap mmc0 and mmc1 in boot_targets if booted from SD-Card.
|
|
*
|
|
* If bootsource is uSD-card we can assume that we want to use the
|
|
* SD-Card instead of the eMMC as first boot_target for distroboot.
|
|
* We only want to swap the defaults and not any custom environment a
|
|
* user has set. We exit early if a changed boot_targets environment
|
|
* is detected.
|
|
*/
|
|
static int setup_boottargets(void)
|
|
{
|
|
const char *boot_device =
|
|
ofnode_read_chosen_string("u-boot,spl-boot-device");
|
|
char *env_default, *env;
|
|
|
|
if (!boot_device) {
|
|
debug("%s: /chosen/u-boot,spl-boot-device not set\n",
|
|
__func__);
|
|
return -1;
|
|
}
|
|
debug("%s: booted from %s\n", __func__, boot_device);
|
|
|
|
env_default = env_get_default("boot_targets");
|
|
env = env_get("boot_targets");
|
|
if (!env) {
|
|
debug("%s: boot_targets does not exist\n", __func__);
|
|
return -1;
|
|
}
|
|
debug("%s: boot_targets current: %s - default: %s\n",
|
|
__func__, env, env_default);
|
|
|
|
if (strcmp(env_default, env) != 0) {
|
|
debug("%s: boot_targets not default, don't change it\n",
|
|
__func__);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Make the default boot medium between SD Card and eMMC, the one that
|
|
* was used to load U-Boot proper. If SPI-NOR flash was used, keep
|
|
* original default order.
|
|
*/
|
|
if (strcmp(boot_device, "/spi@ff1d0000/flash@0")) {
|
|
bool sd_booted = !strcmp(boot_device, "/mmc@fe320000");
|
|
char *mmc0, *mmc1;
|
|
|
|
debug("%s: booted from %s\n", __func__,
|
|
sd_booted ? "SD-Card" : "eMMC");
|
|
mmc0 = strstr(env, "mmc0");
|
|
mmc1 = strstr(env, "mmc1");
|
|
|
|
if (!mmc0 || !mmc1) {
|
|
debug("%s: only one mmc boot_target found\n", __func__);
|
|
return -1;
|
|
}
|
|
|
|
/*
|
|
* If mmc0 comes first in the boot order and U-Boot proper was
|
|
* loaded from mmc1, swap mmc0 and mmc1 in the list.
|
|
* If mmc1 comes first in the boot order and U-Boot proper was
|
|
* loaded from mmc0, swap mmc0 and mmc1 in the list.
|
|
*/
|
|
if ((mmc0 < mmc1 && sd_booted) ||
|
|
(mmc0 > mmc1 && !sd_booted)) {
|
|
mmc0[3] = '1';
|
|
mmc1[3] = '0';
|
|
debug("%s: set boot_targets to: %s\n", __func__, env);
|
|
env_set("boot_targets", env);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int mmc_get_env_dev(void)
|
|
{
|
|
const char *boot_device =
|
|
ofnode_read_chosen_string("u-boot,spl-boot-device");
|
|
|
|
if (!boot_device) {
|
|
debug("%s: /chosen/u-boot,spl-boot-device not set\n",
|
|
__func__);
|
|
return CONFIG_SYS_MMC_ENV_DEV;
|
|
}
|
|
|
|
debug("%s: booted from %s\n", __func__, boot_device);
|
|
|
|
if (!strcmp(boot_device, "/mmc@fe320000"))
|
|
return 1;
|
|
|
|
if (!strcmp(boot_device, "/mmc@fe330000"))
|
|
return 0;
|
|
|
|
return CONFIG_SYS_MMC_ENV_DEV;
|
|
}
|
|
|
|
#if !IS_ENABLED(CONFIG_ENV_IS_NOWHERE)
|
|
#error Please enable CONFIG_ENV_IS_NOWHERE
|
|
#endif
|
|
|
|
enum env_location arch_env_get_location(enum env_operation op, int prio)
|
|
{
|
|
const char *boot_device =
|
|
ofnode_read_chosen_string("u-boot,spl-boot-device");
|
|
|
|
if (prio > 0)
|
|
return ENVL_UNKNOWN;
|
|
|
|
if (!boot_device) {
|
|
debug("%s: /chosen/u-boot,spl-boot-device not set\n",
|
|
__func__);
|
|
return ENVL_NOWHERE;
|
|
}
|
|
|
|
debug("%s: booted from %s\n", __func__, boot_device);
|
|
|
|
if (IS_ENABLED(CONFIG_ENV_IS_IN_SPI_FLASH) &&
|
|
!strcmp(boot_device, "/spi@ff1d0000/flash@0"))
|
|
return ENVL_SPI_FLASH;
|
|
|
|
if (IS_ENABLED(CONFIG_ENV_IS_IN_MMC) &&
|
|
(!strcmp(boot_device, "/mmc@fe320000") ||
|
|
!strcmp(boot_device, "/mmc@fe330000")))
|
|
return ENVL_MMC;
|
|
|
|
printf("%s: No environment available: booted from %s but U-Boot "
|
|
"config does not allow loading environment from it.",
|
|
__func__, boot_device);
|
|
|
|
return ENVL_NOWHERE;
|
|
}
|
|
|
|
int misc_init_r(void)
|
|
{
|
|
const u32 cpuid_offset = 0x7;
|
|
const u32 cpuid_length = 0x10;
|
|
u8 cpuid[cpuid_length];
|
|
int ret;
|
|
|
|
ret = rockchip_cpuid_from_efuse(cpuid_offset, cpuid_length, cpuid);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = rockchip_cpuid_set(cpuid, cpuid_length);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = rockchip_setup_macaddr();
|
|
if (ret)
|
|
return ret;
|
|
|
|
setup_iodomain();
|
|
setup_boottargets();
|
|
|
|
return 0;
|
|
}
|