u-boot/doc/README.fsl-esdhc
Yangbo Lu 5a8dbdc6b4 mmc: fsl_esdhc: Add adapter card type identification support
Add adapter card type identification support by reading
FPGA STAT_PRES1 register SDHC Card ID[0:2] bits. To use this function,
define CONFIG_FSL_ESDHC_ADAPTER_IDENT.

Signed-off-by: Yangbo Lu <yangbo.lu@freescale.com>
Cc: York Sun <yorksun@freescale.com>
Cc: Pantelis Antoniou <panto@antoniou-consulting.com>
[York Sun: resolve conflicts in README.fsl-esdhc]
Reviewed-by: York Sun <yorksun@freescale.com>
2015-05-04 09:25:19 -07:00

24 lines
926 B
Text

Freescale esdhc-specific options
- CONFIG_FSL_ESDHC_ADAPTER_IDENT
Support Freescale adapter card type identification. This is implemented by
operating Qixis FPGA relevant registers. The STAT_PRES1 register has SDHC
Card ID[0:2] bits showing the type of card installed in the SDHC Adapter Slot.
SDHC Card ID[0:2] Adapter Card Type
0b000 reserved
0b001 eMMC Card Rev4.5
0b010 SD/MMC Legacy Card
0b011 eMMC Card Rev4.4
0b100 reserved
0b101 MMC Card
0b110 SD Card Rev2.0/3.0
0b111 No card is present
- CONFIG_SYS_FSL_ESDHC_LE
ESDHC IP is in little-endian mode. Accessing ESDHC registers can be
determined by ESDHC IP's endian mode or processor's endian mode.
- CONFIG_SYS_FSL_ESDHC_BE
ESDHC IP is in big-endian mode. Accessing ESDHC registers can be determined
by ESDHC IP's endian mode or processor's endian mode.
- CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT forces to run at 1.8V.