mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-26 14:40:41 +00:00
110 lines
3 KiB
C
110 lines
3 KiB
C
/*
|
|
* (C) Copyright 2007
|
|
* Stefan Roese, DENX Software Engineering, sr@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
/* define DEBUG for debugging output (obviously ;-)) */
|
|
#if 0
|
|
#define DEBUG
|
|
#endif
|
|
|
|
#include <common.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/io.h>
|
|
#include <asm/ppc4xx-gpio.h>
|
|
|
|
extern void board_pll_init_f(void);
|
|
|
|
#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
|
|
static void cram_bcr_write(u32 wr_val)
|
|
{
|
|
wr_val <<= 2;
|
|
|
|
/* set CRAM_CRE to 1 */
|
|
gpio_write_bit(CONFIG_SYS_GPIO_CRAM_CRE, 1);
|
|
|
|
/* Write BCR to CRAM on CS1 */
|
|
out32(wr_val + 0x00200000, 0);
|
|
debug("CRAM VAL: %08x for CS1 ", wr_val + 0x00200000);
|
|
|
|
/* Write BCR to CRAM on CS2 */
|
|
out32(wr_val + 0x02200000, 0);
|
|
debug("CRAM VAL: %08x for CS2\n", wr_val + 0x02200000);
|
|
|
|
sync();
|
|
eieio();
|
|
|
|
/* set CRAM_CRE back to 0 (normal operation) */
|
|
gpio_write_bit(CONFIG_SYS_GPIO_CRAM_CRE, 0);
|
|
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
phys_size_t initdram(int board_type)
|
|
{
|
|
#if defined(CONFIG_NAND_SPL)
|
|
u32 reg;
|
|
|
|
/* don't reinit PLL when booting via I2C bootstrap option */
|
|
mfsdr(SDR0_PINSTP, reg);
|
|
if (reg != 0xf0000000)
|
|
board_pll_init_f();
|
|
#endif
|
|
|
|
#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
|
|
int i;
|
|
u32 val;
|
|
|
|
/* 1. EBC need to program READY, CLK, ADV for ASync mode */
|
|
gpio_config(CONFIG_SYS_GPIO_CRAM_CLK, GPIO_OUT, GPIO_SEL, GPIO_OUT_0);
|
|
gpio_config(CONFIG_SYS_GPIO_CRAM_ADV, GPIO_OUT, GPIO_SEL, GPIO_OUT_0);
|
|
gpio_config(CONFIG_SYS_GPIO_CRAM_CRE, GPIO_OUT, GPIO_SEL, GPIO_OUT_0);
|
|
gpio_config(CONFIG_SYS_GPIO_CRAM_WAIT, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG);
|
|
|
|
/* 2. EBC in Async mode */
|
|
mtebc(PB1AP, 0x078F1EC0);
|
|
mtebc(PB2AP, 0x078F1EC0);
|
|
mtebc(PB1CR, 0x000BC000);
|
|
mtebc(PB2CR, 0x020BC000);
|
|
|
|
/* 3. Set CRAM in Sync mode */
|
|
cram_bcr_write(0x7012); /* CRAM burst setting */
|
|
|
|
/* 4. EBC in Sync mode */
|
|
mtebc(PB1AP, 0x9C0201C0);
|
|
mtebc(PB2AP, 0x9C0201C0);
|
|
|
|
/* Set GPIO pins back to alternate function */
|
|
gpio_config(CONFIG_SYS_GPIO_CRAM_CLK, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG);
|
|
gpio_config(CONFIG_SYS_GPIO_CRAM_ADV, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG);
|
|
|
|
/* Config EBC to use RDY */
|
|
mfsdr(SDR0_ULTRA0, val);
|
|
mtsdr(SDR0_ULTRA0, val | SDR_ULTRA0_EBCRDYEN);
|
|
|
|
/* Wait a short while, since for NAND booting this is too fast */
|
|
for (i=0; i<200000; i++)
|
|
;
|
|
#endif
|
|
|
|
return (CONFIG_SYS_MBYTES_RAM << 20);
|
|
}
|