mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-19 11:18:28 +00:00
a1b322a983
ns16550 busyloops waiting for incoming byte causing watchdog to reboot while waiting for a key press. A call to WATCHDOG_RESET in NS16550_getc loop fixes it. Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
84 lines
2.2 KiB
C
84 lines
2.2 KiB
C
/*
|
|
* COM1 NS16550 support
|
|
* originally from linux source (arch/ppc/boot/ns16550.c)
|
|
* modified to use CONFIG_SYS_ISA_MEM and new defines
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <ns16550.h>
|
|
#include <watchdog.h>
|
|
|
|
#define UART_LCRVAL UART_LCR_8N1 /* 8 data, 1 stop, no parity */
|
|
#define UART_MCRVAL (UART_MCR_DTR | \
|
|
UART_MCR_RTS) /* RTS/DTR */
|
|
#define UART_FCRVAL (UART_FCR_FIFO_EN | \
|
|
UART_FCR_RXSR | \
|
|
UART_FCR_TXSR) /* Clear & enable FIFOs */
|
|
|
|
void NS16550_init (NS16550_t com_port, int baud_divisor)
|
|
{
|
|
com_port->ier = 0x00;
|
|
#if defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2)
|
|
com_port->mdr1 = 0x7; /* mode select reset TL16C750*/
|
|
#endif
|
|
com_port->lcr = UART_LCR_BKSE | UART_LCRVAL;
|
|
com_port->dll = 0;
|
|
com_port->dlm = 0;
|
|
com_port->lcr = UART_LCRVAL;
|
|
com_port->mcr = UART_MCRVAL;
|
|
com_port->fcr = UART_FCRVAL;
|
|
com_port->lcr = UART_LCR_BKSE | UART_LCRVAL;
|
|
com_port->dll = baud_divisor & 0xff;
|
|
com_port->dlm = (baud_divisor >> 8) & 0xff;
|
|
com_port->lcr = UART_LCRVAL;
|
|
#if defined(CONFIG_OMAP) && !defined(CONFIG_OMAP3_ZOOM2)
|
|
#if defined(CONFIG_APTIX)
|
|
com_port->mdr1 = 3; /* /13 mode so Aptix 6MHz can hit 115200 */
|
|
#else
|
|
com_port->mdr1 = 0; /* /16 is proper to hit 115200 with 48MHz */
|
|
#endif
|
|
#endif /* CONFIG_OMAP */
|
|
}
|
|
|
|
#ifndef CONFIG_NS16550_MIN_FUNCTIONS
|
|
void NS16550_reinit (NS16550_t com_port, int baud_divisor)
|
|
{
|
|
com_port->ier = 0x00;
|
|
com_port->lcr = UART_LCR_BKSE | UART_LCRVAL;
|
|
com_port->dll = 0;
|
|
com_port->dlm = 0;
|
|
com_port->lcr = UART_LCRVAL;
|
|
com_port->mcr = UART_MCRVAL;
|
|
com_port->fcr = UART_FCRVAL;
|
|
com_port->lcr = UART_LCR_BKSE;
|
|
com_port->dll = baud_divisor & 0xff;
|
|
com_port->dlm = (baud_divisor >> 8) & 0xff;
|
|
com_port->lcr = UART_LCRVAL;
|
|
}
|
|
#endif /* CONFIG_NS16550_MIN_FUNCTIONS */
|
|
|
|
void NS16550_putc (NS16550_t com_port, char c)
|
|
{
|
|
while ((com_port->lsr & UART_LSR_THRE) == 0);
|
|
com_port->thr = c;
|
|
}
|
|
|
|
#ifndef CONFIG_NS16550_MIN_FUNCTIONS
|
|
char NS16550_getc (NS16550_t com_port)
|
|
{
|
|
while ((com_port->lsr & UART_LSR_DR) == 0) {
|
|
#ifdef CONFIG_USB_TTY
|
|
extern void usbtty_poll(void);
|
|
usbtty_poll();
|
|
#endif
|
|
WATCHDOG_RESET();
|
|
}
|
|
return (com_port->rbr);
|
|
}
|
|
|
|
int NS16550_tstc (NS16550_t com_port)
|
|
{
|
|
return ((com_port->lsr & UART_LSR_DR) != 0);
|
|
}
|
|
|
|
#endif /* CONFIG_NS16550_MIN_FUNCTIONS */
|