u-boot/arch/arm/include/asm/arch-tegra2/clock.h
Simon Glass ffc76482c2 tegra: Add functions to access low-level Osc/PLL details
Add clock_ll_read_pll() to read PLL parameters and clock_get_osc_bypass()
to find out if the Oscillator is bypassed. These are needed by warmboot.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
2012-05-15 08:31:37 +02:00

406 lines
10 KiB
C

/*
* Copyright (c) 2011 The Chromium OS Authors.
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
/* Tegra2 clock control functions */
#ifndef _CLOCK_H
#define _CLOCK_H
/* Set of oscillator frequencies supported in the internal API. */
enum clock_osc_freq {
/* All in MHz, so 13_0 is 13.0MHz */
CLOCK_OSC_FREQ_13_0,
CLOCK_OSC_FREQ_19_2,
CLOCK_OSC_FREQ_12_0,
CLOCK_OSC_FREQ_26_0,
CLOCK_OSC_FREQ_COUNT,
};
/* The PLLs supported by the hardware */
enum clock_id {
CLOCK_ID_FIRST,
CLOCK_ID_CGENERAL = CLOCK_ID_FIRST,
CLOCK_ID_MEMORY,
CLOCK_ID_PERIPH,
CLOCK_ID_AUDIO,
CLOCK_ID_USB,
CLOCK_ID_DISPLAY,
/* now the simple ones */
CLOCK_ID_FIRST_SIMPLE,
CLOCK_ID_XCPU = CLOCK_ID_FIRST_SIMPLE,
CLOCK_ID_EPCI,
CLOCK_ID_SFROM32KHZ,
/* These are the base clocks (inputs to the Tegra SOC) */
CLOCK_ID_32KHZ,
CLOCK_ID_OSC,
CLOCK_ID_COUNT, /* number of clocks */
CLOCK_ID_NONE = -1,
};
/* The clocks supported by the hardware */
enum periph_id {
PERIPH_ID_FIRST,
/* Low word: 31:0 */
PERIPH_ID_CPU = PERIPH_ID_FIRST,
PERIPH_ID_RESERVED1,
PERIPH_ID_RESERVED2,
PERIPH_ID_AC97,
PERIPH_ID_RTC,
PERIPH_ID_TMR,
PERIPH_ID_UART1,
PERIPH_ID_UART2,
/* 8 */
PERIPH_ID_GPIO,
PERIPH_ID_SDMMC2,
PERIPH_ID_SPDIF,
PERIPH_ID_I2S1,
PERIPH_ID_I2C1,
PERIPH_ID_NDFLASH,
PERIPH_ID_SDMMC1,
PERIPH_ID_SDMMC4,
/* 16 */
PERIPH_ID_TWC,
PERIPH_ID_PWM,
PERIPH_ID_I2S2,
PERIPH_ID_EPP,
PERIPH_ID_VI,
PERIPH_ID_2D,
PERIPH_ID_USBD,
PERIPH_ID_ISP,
/* 24 */
PERIPH_ID_3D,
PERIPH_ID_IDE,
PERIPH_ID_DISP2,
PERIPH_ID_DISP1,
PERIPH_ID_HOST1X,
PERIPH_ID_VCP,
PERIPH_ID_RESERVED30,
PERIPH_ID_CACHE2,
/* Middle word: 63:32 */
PERIPH_ID_MEM,
PERIPH_ID_AHBDMA,
PERIPH_ID_APBDMA,
PERIPH_ID_RESERVED35,
PERIPH_ID_KBC,
PERIPH_ID_STAT_MON,
PERIPH_ID_PMC,
PERIPH_ID_FUSE,
/* 40 */
PERIPH_ID_KFUSE,
PERIPH_ID_SBC1,
PERIPH_ID_SNOR,
PERIPH_ID_SPI1,
PERIPH_ID_SBC2,
PERIPH_ID_XIO,
PERIPH_ID_SBC3,
PERIPH_ID_DVC_I2C,
/* 48 */
PERIPH_ID_DSI,
PERIPH_ID_TVO,
PERIPH_ID_MIPI,
PERIPH_ID_HDMI,
PERIPH_ID_CSI,
PERIPH_ID_TVDAC,
PERIPH_ID_I2C2,
PERIPH_ID_UART3,
/* 56 */
PERIPH_ID_RESERVED56,
PERIPH_ID_EMC,
PERIPH_ID_USB2,
PERIPH_ID_USB3,
PERIPH_ID_MPE,
PERIPH_ID_VDE,
PERIPH_ID_BSEA,
PERIPH_ID_BSEV,
/* Upper word 95:64 */
PERIPH_ID_SPEEDO,
PERIPH_ID_UART4,
PERIPH_ID_UART5,
PERIPH_ID_I2C3,
PERIPH_ID_SBC4,
PERIPH_ID_SDMMC3,
PERIPH_ID_PCIE,
PERIPH_ID_OWR,
/* 72 */
PERIPH_ID_AFI,
PERIPH_ID_CORESIGHT,
PERIPH_ID_RESERVED74,
PERIPH_ID_AVPUCQ,
PERIPH_ID_RESERVED76,
PERIPH_ID_RESERVED77,
PERIPH_ID_RESERVED78,
PERIPH_ID_RESERVED79,
/* 80 */
PERIPH_ID_RESERVED80,
PERIPH_ID_RESERVED81,
PERIPH_ID_RESERVED82,
PERIPH_ID_RESERVED83,
PERIPH_ID_IRAMA,
PERIPH_ID_IRAMB,
PERIPH_ID_IRAMC,
PERIPH_ID_IRAMD,
/* 88 */
PERIPH_ID_CRAM2,
PERIPH_ID_COUNT,
PERIPH_ID_NONE = -1,
};
/* Converts a clock number to a clock register: 0=L, 1=H, 2=U */
#define PERIPH_REG(id) ((id) >> 5)
/* Mask value for a clock (within PERIPH_REG(id)) */
#define PERIPH_MASK(id) (1 << ((id) & 0x1f))
/* return 1 if a PLL ID is in range */
#define clock_id_isvalid(id) ((id) >= CLOCK_ID_FIRST && (id) < CLOCK_ID_COUNT)
/* PLL stabilization delay in usec */
#define CLOCK_PLL_STABLE_DELAY_US 300
/* return the current oscillator clock frequency */
enum clock_osc_freq clock_get_osc_freq(void);
/**
* Start PLL using the provided configuration parameters.
*
* @param id clock id
* @param divm input divider
* @param divn feedback divider
* @param divp post divider 2^n
* @param cpcon charge pump setup control
* @param lfcon loop filter setup control
*
* @returns monotonic time in us that the PLL will be stable
*/
unsigned long clock_start_pll(enum clock_id id, u32 divm, u32 divn,
u32 divp, u32 cpcon, u32 lfcon);
/**
* Read low-level parameters of a PLL.
*
* @param id clock id to read (note: USB is not supported)
* @param divm returns input divider
* @param divn returns feedback divider
* @param divp returns post divider 2^n
* @param cpcon returns charge pump setup control
* @param lfcon returns loop filter setup control
*
* @returns 0 if ok, -1 on error (invalid clock id)
*/
int clock_ll_read_pll(enum clock_id clkid, u32 *divm, u32 *divn,
u32 *divp, u32 *cpcon, u32 *lfcon);
/*
* Enable a clock
*
* @param id clock id
*/
void clock_enable(enum periph_id clkid);
/*
* Disable a clock
*
* @param id clock id
*/
void clock_disable(enum periph_id clkid);
/*
* Set whether a clock is enabled or disabled.
*
* @param id clock id
* @param enable 1 to enable, 0 to disable
*/
void clock_set_enable(enum periph_id clkid, int enable);
/**
* Reset a peripheral. This puts it in reset, waits for a delay, then takes
* it out of reset and waits for th delay again.
*
* @param periph_id peripheral to reset
* @param us_delay time to delay in microseconds
*/
void reset_periph(enum periph_id periph_id, int us_delay);
/**
* Put a peripheral into or out of reset.
*
* @param periph_id peripheral to reset
* @param enable 1 to put into reset, 0 to take out of reset
*/
void reset_set_enable(enum periph_id periph_id, int enable);
/* CLK_RST_CONTROLLER_RST_CPU_CMPLX_SET/CLR_0 */
enum crc_reset_id {
/* Things we can hold in reset for each CPU */
crc_rst_cpu = 1,
crc_rst_de = 1 << 2, /* What is de? */
crc_rst_watchdog = 1 << 3,
crc_rst_debug = 1 << 4,
};
/**
* Put parts of the CPU complex into or out of reset.\
*
* @param cpu cpu number (0 or 1 on Tegra2)
* @param which which parts of the complex to affect (OR of crc_reset_id)
* @param reset 1 to assert reset, 0 to de-assert
*/
void reset_cmplx_set_enable(int cpu, int which, int reset);
/**
* Set the source for a peripheral clock. This plus the divisor sets the
* clock rate. You need to look up the datasheet to see the meaning of the
* source parameter as it changes for each peripheral.
*
* Warning: This function is only for use pre-relocation. Please use
* clock_start_periph_pll() instead.
*
* @param periph_id peripheral to adjust
* @param source source clock (0, 1, 2 or 3)
*/
void clock_ll_set_source(enum periph_id periph_id, unsigned source);
/**
* Set the source and divisor for a peripheral clock. This sets the
* clock rate. You need to look up the datasheet to see the meaning of the
* source parameter as it changes for each peripheral.
*
* Warning: This function is only for use pre-relocation. Please use
* clock_start_periph_pll() instead.
*
* @param periph_id peripheral to adjust
* @param source source clock (0, 1, 2 or 3)
* @param divisor divisor value to use
*/
void clock_ll_set_source_divisor(enum periph_id periph_id, unsigned source,
unsigned divisor);
/**
* Start a peripheral PLL clock at the given rate. This also resets the
* peripheral.
*
* @param periph_id peripheral to start
* @param parent PLL id of required parent clock
* @param rate Required clock rate in Hz
* @return rate selected in Hz, or -1U if something went wrong
*/
unsigned clock_start_periph_pll(enum periph_id periph_id,
enum clock_id parent, unsigned rate);
/**
* Returns the rate of a peripheral clock in Hz. Since the caller almost
* certainly knows the parent clock (having just set it) we require that
* this be passed in so we don't need to work it out.
*
* @param periph_id peripheral to start
* @param parent PLL id of parent clock (used to calculate rate, you
* must know this!)
* @return clock rate of peripheral in Hz
*/
unsigned long clock_get_periph_rate(enum periph_id periph_id,
enum clock_id parent);
/**
* Adjust peripheral PLL clock to the given rate. This does not reset the
* peripheral. If a second stage divisor is not available, pass NULL for
* extra_div. If it is available, then this parameter will return the
* divisor selected (which will be a power of 2 from 1 to 256).
*
* @param periph_id peripheral to start
* @param parent PLL id of required parent clock
* @param rate Required clock rate in Hz
* @param extra_div value for the second-stage divisor (NULL if one is
not available)
* @return rate selected in Hz, or -1U if something went wrong
*/
unsigned clock_adjust_periph_pll_div(enum periph_id periph_id,
enum clock_id parent, unsigned rate, int *extra_div);
/**
* Returns the clock rate of a specified clock, in Hz.
*
* @param parent PLL id of clock to check
* @return rate of clock in Hz
*/
unsigned clock_get_rate(enum clock_id clkid);
/**
* Start up a UART using low-level calls
*
* Prior to relocation clock_start_periph_pll() cannot be called. This
* function provides a way to set up a UART using low-level calls which
* do not require BSS.
*
* @param periph_id Peripheral ID of UART to enable (e,g, PERIPH_ID_UART1)
*/
void clock_ll_start_uart(enum periph_id periph_id);
/**
* Decode a peripheral ID from a device tree node.
*
* This works by looking up the peripheral's 'clocks' node and reading out
* the second cell, which is the clock number / peripheral ID.
*
* @param blob FDT blob to use
* @param node Node to look at
* @return peripheral ID, or PERIPH_ID_NONE if none
*/
enum periph_id clock_decode_periph_id(const void *blob, int node);
/**
* Checks if the oscillator bypass is enabled (XOBP bit)
*
* @return 1 if bypass is enabled, 0 if not
*/
int clock_get_osc_bypass(void);
/*
* Checks that clocks are valid and prints a warning if not
*
* @return 0 if ok, -1 on error
*/
int clock_verify(void);
/* Initialize the clocks */
void clock_init(void);
/* Initialize the PLLs */
void clock_early_init(void);
#endif