mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-11 15:37:23 +00:00
181bd9dc61
Add option to set shell prompt string from menuconfig and migrate boards globally. The migration is done as follows: - Boards that explicitly and unconditionally set CONFIG_SYS_PROMPT had the entry moved to their defconfig files. - Boards that defined some kind of #ifdef logic which selects the CONFIG_SYS_PROMPT (for example qemu-mips) got an #undef CONFIG_SYS_PROMPT right before the #ifdef logic and were left alone. - This change forces CONFIG_SYS_PROMPT to be a per board decision, and thus CONFIG_SYS_PROMPT was removed from all <soc>_common.h and <arch>_common.h files. This results in a streamlined default value across platforms, and includes the following files: spear-common, sunxi-common, mv-common, ti_armv7_common, tegra-common, at91-sama5_common, and zynq-common. - Boards that relied on <arch/soc>_common.h values of CONFIG_SYS_PROMPT were not updated in their respective defconfig files under the assumption that since they did not explicitly define a value, they're fine with whatever the default is. - On the other hand, boards that relied on a value defined in some <boards>_common.h file such as woodburn_common, rpi-common, bur_am335x_common, ls2085a_common, siemens_am33x_common, and omap3_evm_common, had their values moved to the respective defconfig files. - The define V_PROMPT was removed, since it is not used anywhere except for assigning a value for CONFIG_SYS_PROMPT. Cc: Tom Rini <trini@konsulko.com> Cc: Masahiro Yamada <yamada.m@jp.panasonic.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Igor Grinberg <grinberg@compulab.co.il> Signed-off-by: Nikita Kiryanov <nikita@compulab.co.il> [trini: Add spring, sniper, smartweb to conversion] Signed-off-by: Tom Rini <trini@konsulko.com>
132 lines
4 KiB
C
132 lines
4 KiB
C
/*
|
|
* Sysam AMCORE board configuration
|
|
*
|
|
* (C) Copyright 2015 Angelo Dureghello <angelo@sysam.it>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __AMCORE_CONFIG_H
|
|
#define __AMCORE_CONFIG_H
|
|
|
|
#define CONFIG_AMCORE
|
|
#define CONFIG_HOSTNAME AMCORE
|
|
|
|
#define CONFIG_MCFTMR
|
|
#define CONFIG_MCFUART
|
|
#define CONFIG_SYS_UART_PORT 0
|
|
#define CONFIG_BAUDRATE 115200
|
|
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
|
|
|
|
#define CONFIG_BOOTDELAY 1
|
|
#define CONFIG_BOOTCOMMAND "bootm ffc20000"
|
|
|
|
#undef CONFIG_CMD_AES
|
|
#define CONFIG_CMD_CACHE
|
|
#define CONFIG_CMD_TIMER
|
|
#define CONFIG_CMD_DIAG
|
|
|
|
/* undef to save memory */
|
|
#undef CONFIG_SYS_LONGHELP
|
|
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
/* Console I/O buff. size */
|
|
#define CONFIG_SYS_CBSIZE 1024
|
|
#else
|
|
#define CONFIG_SYS_CBSIZE 256
|
|
#endif
|
|
/* Print buffer size */
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
|
|
sizeof(CONFIG_SYS_PROMPT)+16)
|
|
/* max number of command args */
|
|
#define CONFIG_SYS_MAXARGS 16
|
|
/* Boot argument buffer size */
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
|
|
|
|
#define CONFIG_SYS_CONSOLE_INFO_QUIET 1 /* no console @ startup */
|
|
#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */
|
|
#define CONFIG_LOOPW 1 /* enable loopw command */
|
|
#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR 0x20000 /* default load address */
|
|
|
|
#define CONFIG_SYS_MEMTEST_START 0x0
|
|
#define CONFIG_SYS_MEMTEST_END 0x1000000
|
|
|
|
#define CONFIG_SYS_HZ 1000
|
|
|
|
#define CONFIG_SYS_CLK 45000000
|
|
#define CONFIG_SYS_CPU_CLK (CONFIG_SYS_CLK * 2)
|
|
/* Register Base Addrs */
|
|
#define CONFIG_SYS_MBAR 0x10000000
|
|
/* Definitions for initial stack pointer and data area (in DPRAM) */
|
|
#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000
|
|
/* size of internal SRAM */
|
|
#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
|
|
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
|
|
GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE 0x00000000
|
|
#define CONFIG_SYS_SDRAM_SIZE 0x1000000
|
|
#define CONFIG_SYS_FLASH_BASE 0xffc00000
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 1024
|
|
#define CONFIG_SYS_FLASH_ERASE_TOUT 1000
|
|
|
|
#define CONFIG_SYS_FLASH_CFI
|
|
#define CONFIG_FLASH_CFI_DRIVER
|
|
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
|
|
/* amcore design has flash data bytes wired swapped */
|
|
#define CONFIG_SYS_WRITE_SWAPPED_DATA
|
|
/* reserve 128-4KB */
|
|
#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
|
|
#define CONFIG_SYS_MONITOR_LEN ((128 - 4) * 1024)
|
|
#define CONFIG_SYS_MALLOC_LEN (1 * 1024 * 1024)
|
|
#define CONFIG_SYS_BOOTPARAMS_LEN (64 * 1024)
|
|
|
|
#define CONFIG_ENV_IS_IN_FLASH 1
|
|
#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + \
|
|
CONFIG_SYS_MONITOR_LEN)
|
|
#define CONFIG_ENV_SIZE 0x1000
|
|
#define CONFIG_ENV_SECT_SIZE 0x1000
|
|
|
|
#define LDS_BOARD_TEXT \
|
|
. = DEFINED(env_offset) ? env_offset : .; \
|
|
common/env_embedded.o (.text*);
|
|
|
|
/* memory map space for linux boot data */
|
|
#define CONFIG_SYS_BOOTMAPSZ (8 << 20)
|
|
|
|
/*
|
|
* Cache Configuration
|
|
*
|
|
* Special 8K version 3 core cache.
|
|
* This is a single unified instruction/data cache.
|
|
* sdram - single region - no masks
|
|
*/
|
|
#define CONFIG_SYS_CACHELINE_SIZE 16
|
|
|
|
#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
|
|
CONFIG_SYS_INIT_RAM_SIZE - 8)
|
|
#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
|
|
CONFIG_SYS_INIT_RAM_SIZE - 4)
|
|
#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINVA)
|
|
#define CONFIG_SYS_CACHE_ACR0 (CF_ACR_CM_WT | CF_ACR_SM_ALL | \
|
|
CF_ACR_EN)
|
|
#define CONFIG_SYS_CACHE_ICACR (CF_CACR_DCM_P | CF_CACR_ESB | \
|
|
CF_CACR_EC)
|
|
|
|
/* CS0 - AMD Flash, address 0xffc00000 */
|
|
#define CONFIG_SYS_CS0_BASE (CONFIG_SYS_FLASH_BASE>>16)
|
|
/* 4MB, AA=0,V=1 C/I BIT for errata */
|
|
#define CONFIG_SYS_CS0_MASK 0x003f0001
|
|
/* WS=10, AA=1, PS=16bit (10) */
|
|
#define CONFIG_SYS_CS0_CTRL 0x1980
|
|
/* CS1 - DM9000 Ethernet Controller, address 0x30000000 */
|
|
#define CONFIG_SYS_CS1_BASE 0x3000
|
|
#define CONFIG_SYS_CS1_MASK 0x00070001
|
|
#define CONFIG_SYS_CS1_CTRL 0x0100
|
|
|
|
#endif /* __AMCORE_CONFIG_H */
|
|
|