u-boot/arch/x86/include/asm/global_data.h
Graeme Russ 9558b48af0 console: Implement pre-console buffer
Allow redirection of console output prior to console initialisation to a
temporary buffer.

To enable this functionality, the board (or arch) must define:
 - CONFIG_PRE_CONSOLE_BUFFER - Enable pre-console buffer
 - CONFIG_PRE_CON_BUF_ADDR - Base address of pre-console buffer
 - CONFIG_PRE_CON_BUF_SZ - Size of pre-console buffer (in bytes)

The pre-console buffer will buffer the last CONFIG_PRE_CON_BUF_SZ bytes
Any earlier characters are silently dropped.
2011-10-05 22:03:09 +02:00

105 lines
3.5 KiB
C

/*
* (C) Copyright 2002-2010
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef __ASM_GBL_DATA_H
#define __ASM_GBL_DATA_H
/*
* The following data structure is placed in some memory wich is
* available very early after boot (like DPRAM on MPC8xx/MPC82xx, or
* some locked parts of the data cache) to allow for a minimum set of
* global variables during system initialization (until we have set
* up the memory controller so that we can use RAM).
*
* Keep it *SMALL* and remember to set GENERATED_GBL_DATA_SIZE > sizeof(gd_t)
*/
#ifndef __ASSEMBLY__
typedef struct global_data {
bd_t *bd;
unsigned long flags;
unsigned long baudrate;
unsigned long have_console; /* serial_init() was called */
#ifdef CONFIG_PRE_CONSOLE_BUFFER
unsigned long precon_buf_idx; /* Pre-Console buffer index */
#endif
unsigned long reloc_off; /* Relocation Offset */
unsigned long load_off; /* Load Offset */
unsigned long env_addr; /* Address of Environment struct */
unsigned long env_valid; /* Checksum of Environment valid? */
unsigned long cpu_clk; /* CPU clock in Hz! */
unsigned long bus_clk;
unsigned long relocaddr; /* Start address of U-Boot in RAM */
unsigned long start_addr_sp; /* start_addr_stackpointer */
phys_size_t ram_size; /* RAM size */
unsigned long reset_status; /* reset status register at boot */
void **jt; /* jump table */
char env_buf[32]; /* buffer for getenv() before reloc. */
} gd_t;
extern gd_t *gd;
#endif
/* Word Offsets into Global Data - MUST match struct gd_t */
#define GD_BD 0
#define GD_FLAGS 1
#define GD_BAUDRATE 2
#define GD_HAVE_CONSOLE 3
#define GD_RELOC_OFF 4
#define GD_LOAD_OFF 5
#define GD_ENV_ADDR 6
#define GD_ENV_VALID 7
#define GD_CPU_CLK 8
#define GD_BUS_CLK 9
#define GD_RELOC_ADDR 10
#define GD_START_ADDR_SP 11
#define GD_RAM_SIZE 12
#define GD_RESET_STATUS 13
#define GD_JT 14
#define GD_SIZE 15
/*
* Global Data Flags
*/
#define GD_FLG_RELOC 0x00001 /* Code was relocated to RAM */
#define GD_FLG_DEVINIT 0x00002 /* Devices have been initialized */
#define GD_FLG_SILENT 0x00004 /* Silent mode */
#define GD_FLG_POSTFAIL 0x00008 /* Critical POST test failed */
#define GD_FLG_POSTSTOP 0x00010 /* POST seqeunce aborted */
#define GD_FLG_LOGINIT 0x00020 /* Log Buffer has been initialized */
#define GD_FLG_DISABLE_CONSOLE 0x00040 /* Disable console (in & out) */
#define GD_FLG_ENV_READY 0x00080 /* Environment imported into hash table */
#define GD_FLG_COLD_BOOT 0x00100 /* Cold Boot */
#define GD_FLG_WARM_BOOT 0x00200 /* Warm Boot */
#if 0
#define DECLARE_GLOBAL_DATA_PTR
#else
#define XTRN_DECLARE_GLOBAL_DATA_PTR extern
#define DECLARE_GLOBAL_DATA_PTR XTRN_DECLARE_GLOBAL_DATA_PTR \
gd_t *gd
#endif
#endif /* __ASM_GBL_DATA_H */