u-boot/include/log.h
Simon Glass c98cb51252 bootstd: Add a separate log category for expo
This feature is different enough from bootstd that it probably deserves
its own log category. It cannot use a uclass since it is not a device.

Add a new category.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-07-14 12:54:51 -04:00

691 lines
21 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Logging support
*
* Copyright (c) 2017 Google, Inc
* Written by Simon Glass <sjg@chromium.org>
*/
#ifndef __LOG_H
#define __LOG_H
#include <stdio.h>
#include <linker_lists.h>
#include <dm/uclass-id.h>
#include <linux/bitops.h>
#include <linux/list.h>
struct cmd_tbl;
/**
* enum log_level_t - Log levels supported, ranging from most to least important
*/
enum log_level_t {
/** @LOGL_EMERG: U-Boot is unstable */
LOGL_EMERG = 0,
/** @LOGL_ALERT: Action must be taken immediately */
LOGL_ALERT,
/** @LOGL_CRIT: Critical conditions */
LOGL_CRIT,
/** @LOGL_ERR: Error that prevents something from working */
LOGL_ERR,
/** @LOGL_WARNING: Warning may prevent optimal operation */
LOGL_WARNING,
/** @LOGL_NOTICE: Normal but significant condition, printf() */
LOGL_NOTICE,
/** @LOGL_INFO: General information message */
LOGL_INFO,
/** @LOGL_DEBUG: Basic debug-level message */
LOGL_DEBUG,
/** @LOGL_DEBUG_CONTENT: Debug message showing full message content */
LOGL_DEBUG_CONTENT,
/** @LOGL_DEBUG_IO: Debug message showing hardware I/O access */
LOGL_DEBUG_IO,
/** @LOGL_COUNT: Total number of valid log levels */
LOGL_COUNT,
/** @LOGL_NONE: Used to indicate that there is no valid log level */
LOGL_NONE,
/** @LOGL_LEVEL_MASK: Mask for valid log levels */
LOGL_LEVEL_MASK = 0xf,
/** @LOGL_FORCE_DEBUG: Mask to force output due to LOG_DEBUG */
LOGL_FORCE_DEBUG = 0x10,
/** @LOGL_FIRST: The first, most-important log level */
LOGL_FIRST = LOGL_EMERG,
/** @LOGL_MAX: The last, least-important log level */
LOGL_MAX = LOGL_DEBUG_IO,
/** @LOGL_CONT: Use same log level as in previous call */
LOGL_CONT = -1,
};
/**
* enum log_category_t - Log categories supported.
*
* Log categories between %LOGC_FIRST and %LOGC_NONE correspond to uclasses
* (i.e. &enum uclass_id), but there are also some more generic categories.
*
* Remember to update log_cat_name[] after adding a new category.
*/
enum log_category_t {
/** @LOGC_FIRST: First log category */
LOGC_FIRST = 0, /* First part mirrors UCLASS_... */
/** @LOGC_NONE: Default log category */
LOGC_NONE = UCLASS_COUNT, /* First number is after all uclasses */
/** @LOGC_ARCH: Related to arch-specific code */
LOGC_ARCH,
/** @LOGC_BOARD: Related to board-specific code */
LOGC_BOARD,
/** @LOGC_CORE: Related to core features (non-driver-model) */
LOGC_CORE,
/** @LOGC_DM: Core driver-model */
LOGC_DM,
/** @LOGC_DT: Device-tree */
LOGC_DT,
/** @LOGC_EFI: EFI implementation */
LOGC_EFI,
/** @LOGC_ALLOC: Memory allocation */
LOGC_ALLOC,
/** @LOGC_SANDBOX: Related to the sandbox board */
LOGC_SANDBOX,
/** @LOGC_BLOBLIST: Bloblist */
LOGC_BLOBLIST,
/** @LOGC_DEVRES: Device resources (``devres_...`` functions) */
LOGC_DEVRES,
/** @LOGC_ACPI: Advanced Configuration and Power Interface (ACPI) */
LOGC_ACPI,
/** @LOGC_BOOT: Related to boot process / boot image processing */
LOGC_BOOT,
/** @LOGC_EVENT: Related to event and event handling */
LOGC_EVENT,
/** @LOGC_FS: Related to filesystems */
LOGC_FS,
/** @LOGC_EXPO: Related to expo handling */
LOGC_EXPO,
/** @LOGC_COUNT: Number of log categories */
LOGC_COUNT,
/** @LOGC_END: Sentinel value for lists of log categories */
LOGC_END,
/** @LOGC_CONT: Use same category as in previous call */
LOGC_CONT = -1,
};
/* Helper to cast a uclass ID to a log category */
static inline int log_uc_cat(enum uclass_id id)
{
return (enum log_category_t)id;
}
/**
* _log() - Internal function to emit a new log record
*
* @cat: Category of log record (indicating which subsystem generated it)
* @level: Level of log record (indicating its severity)
* @file: File name of file where log record was generated
* @line: Line number in file where log record was generated
* @func: Function where log record was generated
* @fmt: printf() format string for log record
* @...: Optional parameters, according to the format string @fmt
* Return: 0 if log record was emitted, -ve on error
*/
int _log(enum log_category_t cat, enum log_level_t level, const char *file,
int line, const char *func, const char *fmt, ...)
__attribute__ ((format (__printf__, 6, 7)));
/**
* _log_buffer - Internal function to print data buffer in hex and ascii form
*
* @cat: Category of log record (indicating which subsystem generated it)
* @level: Level of log record (indicating its severity)
* @file: File name of file where log record was generated
* @line: Line number in file where log record was generated
* @func: Function where log record was generated
* @addr: Starting address to display at start of line
* @data: pointer to data buffer
* @width: data value width. May be 1, 2, or 4.
* @count: number of values to display
* @linelen: Number of values to print per line; specify 0 for default length
*/
int _log_buffer(enum log_category_t cat, enum log_level_t level,
const char *file, int line, const char *func, ulong addr,
const void *data, uint width, uint count, uint linelen);
/* Define this at the top of a file to add a prefix to debug messages */
#ifndef pr_fmt
#define pr_fmt(fmt) fmt
#endif
/* Use a default category if this file does not supply one */
#ifndef LOG_CATEGORY
#define LOG_CATEGORY LOGC_NONE
#endif
/*
* This header may be including when CONFIG_LOG is disabled, in which case
* CONFIG_LOG_MAX_LEVEL is not defined. Add a check for this.
*/
#if CONFIG_IS_ENABLED(LOG)
#define _LOG_MAX_LEVEL CONFIG_VAL(LOG_MAX_LEVEL)
#else
#define _LOG_MAX_LEVEL LOGL_INFO
#endif
#define log_emer(_fmt...) log(LOG_CATEGORY, LOGL_EMERG, ##_fmt)
#define log_alert(_fmt...) log(LOG_CATEGORY, LOGL_ALERT, ##_fmt)
#define log_crit(_fmt...) log(LOG_CATEGORY, LOGL_CRIT, ##_fmt)
#define log_err(_fmt...) log(LOG_CATEGORY, LOGL_ERR, ##_fmt)
#define log_warning(_fmt...) log(LOG_CATEGORY, LOGL_WARNING, ##_fmt)
#define log_notice(_fmt...) log(LOG_CATEGORY, LOGL_NOTICE, ##_fmt)
#define log_info(_fmt...) log(LOG_CATEGORY, LOGL_INFO, ##_fmt)
#define log_debug(_fmt...) log(LOG_CATEGORY, LOGL_DEBUG, ##_fmt)
#define log_content(_fmt...) log(LOG_CATEGORY, LOGL_DEBUG_CONTENT, ##_fmt)
#define log_io(_fmt...) log(LOG_CATEGORY, LOGL_DEBUG_IO, ##_fmt)
#define log_cont(_fmt...) log(LOGC_CONT, LOGL_CONT, ##_fmt)
#ifdef LOG_DEBUG
#define _LOG_DEBUG LOGL_FORCE_DEBUG
#ifndef DEBUG
#define DEBUG
#endif
#else
#define _LOG_DEBUG 0
#endif
#if CONFIG_IS_ENABLED(LOG)
/* Emit a log record if the level is less that the maximum */
#define log(_cat, _level, _fmt, _args...) ({ \
int _l = _level; \
if (_LOG_DEBUG != 0 || _l <= _LOG_MAX_LEVEL) \
_log((enum log_category_t)(_cat), \
(enum log_level_t)(_l | _LOG_DEBUG), __FILE__, \
__LINE__, __func__, \
pr_fmt(_fmt), ##_args); \
})
/* Emit a dump if the level is less that the maximum */
#define log_buffer(_cat, _level, _addr, _data, _width, _count, _linelen) ({ \
int _l = _level; \
if (_LOG_DEBUG != 0 || _l <= _LOG_MAX_LEVEL) \
_log_buffer((enum log_category_t)(_cat), \
(enum log_level_t)(_l | _LOG_DEBUG), __FILE__, \
__LINE__, __func__, _addr, _data, \
_width, _count, _linelen); \
})
#else
/* Note: _LOG_DEBUG != 0 avoids a warning with clang */
#define log(_cat, _level, _fmt, _args...) ({ \
int _l = _level; \
if (_LOG_DEBUG != 0 || _l <= LOGL_INFO || \
(_DEBUG && _l == LOGL_DEBUG)) \
printf(_fmt, ##_args); \
})
#define log_buffer(_cat, _level, _addr, _data, _width, _count, _linelen) ({ \
int _l = _level; \
if (_LOG_DEBUG != 0 || _l <= LOGL_INFO || \
(_DEBUG && _l == LOGL_DEBUG)) \
print_buffer(_addr, _data, _width, _count, _linelen); \
})
#endif
#ifdef DEBUG
#define _DEBUG 1
#else
#define _DEBUG 0
#endif
#ifdef CONFIG_SPL_BUILD
#define _SPL_BUILD 1
#else
#define _SPL_BUILD 0
#endif
#if CONFIG_IS_ENABLED(LOG)
#define debug_cond(cond, fmt, args...) \
({ \
if (cond) \
log(LOG_CATEGORY, \
(enum log_level_t)(LOGL_FORCE_DEBUG | _LOG_DEBUG), \
fmt, ##args); \
})
#else /* _DEBUG */
/*
* Output a debug text when condition "cond" is met. The "cond" should be
* computed by a preprocessor in the best case, allowing for the best
* optimization.
*/
#define debug_cond(cond, fmt, args...) \
({ \
if (cond) \
printf(pr_fmt(fmt), ##args); \
})
#endif /* _DEBUG */
/* Show a message if DEBUG is defined in a file */
#define debug(fmt, args...) \
debug_cond(_DEBUG, fmt, ##args)
/* Show a message if not in SPL */
#define warn_non_spl(fmt, args...) \
debug_cond(!_SPL_BUILD, fmt, ##args)
/*
* An assertion is run-time check done in debug mode only. If DEBUG is not
* defined then it is skipped. If DEBUG is defined and the assertion fails,
* then it calls panic*( which may or may not reset/halt U-Boot (see
* CONFIG_PANIC_HANG), It is hoped that all failing assertions are found
* before release, and after release it is hoped that they don't matter. But
* in any case these failing assertions cannot be fixed with a reset (which
* may just do the same assertion again).
*/
void __assert_fail(const char *assertion, const char *file, unsigned int line,
const char *function);
/**
* assert() - assert expression is true
*
* If the expression x evaluates to false and _DEBUG evaluates to true, a panic
* message is written and the system stalls. The value of _DEBUG is set to true
* if DEBUG is defined before including common.h.
*
* The expression x is always executed irrespective of the value of _DEBUG.
*
* @x: expression to test
*/
#define assert(x) \
({ if (!(x) && _DEBUG) \
__assert_fail(#x, __FILE__, __LINE__, __func__); })
/*
* This one actually gets compiled in even without DEBUG. It doesn't include the
* full pathname as it may be huge. Only use this when the user should be
* warning, similar to BUG_ON() in linux.
*
* Return: true if assertion succeeded (condition is true), else false
*/
#define assert_noisy(x) \
({ bool _val = (x); \
if (!_val) \
__assert_fail(#x, "?", __LINE__, __func__); \
_val; \
})
#if CONFIG_IS_ENABLED(LOG) && defined(CONFIG_LOG_ERROR_RETURN)
/*
* Log an error return value, possibly with a message. Usage:
*
* return log_ret(fred_call());
*
* or:
*
* return log_msg_ret("get", fred_call());
*
* It is recommended to use <= 3 characters for the name since this will only
* use 4 bytes in rodata
*/
#define log_ret(_ret) ({ \
int __ret = (_ret); \
if (__ret < 0) \
log(LOG_CATEGORY, LOGL_ERR, "returning err=%d\n", __ret); \
__ret; \
})
#define log_msg_ret(_msg, _ret) ({ \
int __ret = (_ret); \
if (__ret < 0) \
log(LOG_CATEGORY, LOGL_ERR, "%s: returning err=%d\n", _msg, \
__ret); \
__ret; \
})
/*
* Similar to the above, but any non-zero value is consider an error, not just
* values less than 0.
*/
#define log_retz(_ret) ({ \
int __ret = (_ret); \
if (__ret) \
log(LOG_CATEGORY, LOGL_ERR, "returning err=%d\n", __ret); \
__ret; \
})
#define log_msg_retz(_msg, _ret) ({ \
int __ret = (_ret); \
if (__ret) \
log(LOG_CATEGORY, LOGL_ERR, "%s: returning err=%d\n", _msg, \
__ret); \
__ret; \
})
#else
/* Non-logging versions of the above which just return the error code */
#define log_ret(_ret) (_ret)
#define log_msg_ret(_msg, _ret) ((void)(_msg), _ret)
#define log_retz(_ret) (_ret)
#define log_msg_retz(_msg, _ret) ((void)(_msg), _ret)
#endif
/** * enum log_rec_flags - Flags for a log record */
enum log_rec_flags {
/** @LOGRECF_FORCE_DEBUG: Force output of debug record */
LOGRECF_FORCE_DEBUG = BIT(0),
/** @LOGRECF_CONT: Continuation of previous log record */
LOGRECF_CONT = BIT(1),
};
/**
* struct log_rec - a single log record
*
* Holds information about a single record in the log
*
* Members marked as 'not allocated' are stored as pointers and the caller is
* responsible for making sure that the data pointed to is not overwritten.
* Members marked as 'allocated' are allocated (e.g. via strdup()) by the log
* system.
*
* TODO(sjg@chromium.org): Compress this struct down a bit to reduce space, e.g.
* a single u32 for cat, level, line and force_debug
*
* @cat: Category, representing a uclass or part of U-Boot
* @level: Severity level, less severe is higher
* @line: Line number where the log record was generated
* @flags: Flags for log record (enum log_rec_flags)
* @file: Name of file where the log record was generated (not allocated)
* @func: Function where the log record was generated (not allocated)
* @msg: Log message (allocated)
*/
struct log_rec {
enum log_category_t cat;
enum log_level_t level;
u16 line;
u8 flags;
const char *file;
const char *func;
const char *msg;
};
struct log_device;
enum log_device_flags {
LOGDF_ENABLE = BIT(0), /* Device is enabled */
};
/**
* struct log_driver - a driver which accepts and processes log records
*
* @name: Name of driver
* @emit: Method to call to emit a log record via this device
* @flags: Initial value for flags (use LOGDF_ENABLE to enable on start-up)
*/
struct log_driver {
const char *name;
/**
* @emit: emit a log record
*
* Called by the log system to pass a log record to a particular driver
* for processing. The filter is checked before calling this function.
*/
int (*emit)(struct log_device *ldev, struct log_rec *rec);
unsigned short flags;
};
/**
* struct log_device - an instance of a log driver
*
* Since drivers are set up at build-time we need to have a separate device for
* the run-time aspects of drivers (currently just a list of filters to apply
* to records send to this device).
*
* @next_filter_num: Sequence number of next filter filter added (0=no filters
* yet). This increments with each new filter on the device, but never
* decrements
* @flags: Flags for this filter (enum log_device_flags)
* @drv: Pointer to driver for this device
* @filter_head: List of filters for this device
* @sibling_node: Next device in the list of all devices
*/
struct log_device {
unsigned short next_filter_num;
unsigned short flags;
struct log_driver *drv;
struct list_head filter_head;
struct list_head sibling_node;
};
enum {
LOGF_MAX_CATEGORIES = 5, /* maximum categories per filter */
};
/**
* enum log_filter_flags - Flags which modify a filter
*/
enum log_filter_flags {
/** @LOGFF_HAS_CAT: Filter has a category list */
LOGFF_HAS_CAT = 1 << 0,
/** @LOGFF_DENY: Filter denies matching messages */
LOGFF_DENY = 1 << 1,
/** @LOGFF_LEVEL_MIN: Filter's level is a minimum, not a maximum */
LOGFF_LEVEL_MIN = 1 << 2,
};
/**
* struct log_filter - criteria to filter out log messages
*
* If a message matches all criteria, then it is allowed. If LOGFF_DENY is set,
* then it is denied instead.
*
* @filter_num: Sequence number of this filter. This is returned when adding a
* new filter, and must be provided when removing a previously added
* filter.
* @flags: Flags for this filter (``LOGFF_...``)
* @cat_list: List of categories to allow (terminated by %LOGC_END). If empty
* then all categories are permitted. Up to %LOGF_MAX_CATEGORIES entries
* can be provided
* @level: Maximum (or minimum, if %LOGFF_MIN_LEVEL) log level to allow
* @file_list: List of files to allow, separated by comma. If NULL then all
* files are permitted
* @sibling_node: Next filter in the list of filters for this log device
*/
struct log_filter {
int filter_num;
int flags;
enum log_category_t cat_list[LOGF_MAX_CATEGORIES];
enum log_level_t level;
const char *file_list;
struct list_head sibling_node;
};
#define LOG_DRIVER(_name) \
ll_entry_declare(struct log_driver, _name, log_driver)
/* Get a pointer to a given driver */
#define LOG_GET_DRIVER(__name) \
ll_entry_get(struct log_driver, __name, log_driver)
/**
* log_get_cat_name() - Get the name of a category
*
* @cat: Category to look up
* Return: category name (which may be a uclass driver name) if found, or
* "<invalid>" if invalid, or "<missing>" if not found. All error
* responses begin with '<'.
*/
const char *log_get_cat_name(enum log_category_t cat);
/**
* log_get_cat_by_name() - Look up a category by name
*
* @name: Name to look up
* Return: Category, or %LOGC_NONE if not found
*/
enum log_category_t log_get_cat_by_name(const char *name);
/**
* log_get_level_name() - Get the name of a log level
*
* @level: Log level to look up
* Return: Log level name (in ALL CAPS)
*/
const char *log_get_level_name(enum log_level_t level);
/**
* log_get_level_by_name() - Look up a log level by name
*
* @name: Name to look up
* Return: Log level, or %LOGL_NONE if not found
*/
enum log_level_t log_get_level_by_name(const char *name);
/**
* log_device_find_by_name() - Look up a log device by its driver's name
*
* @drv_name: Name of the driver
* Return: the log device, or %NULL if not found
*/
struct log_device *log_device_find_by_name(const char *drv_name);
/**
* log_has_cat() - check if a log category exists within a list
*
* @cat_list: List of categories to check, at most %LOGF_MAX_CATEGORIES entries
* long, terminated by %LC_END if fewer
* @cat: Category to search for
*
* Return: ``true`` if @cat is in @cat_list, else ``false``
*/
bool log_has_cat(enum log_category_t cat_list[], enum log_category_t cat);
/**
* log_has_file() - check if a file is with a list
*
* @file_list: List of files to check, separated by comma
* @file: File to check for. This string is matched against the end of each
* file in the list, i.e. ignoring any preceding path. The list is
* intended to consist of relative pathnames, e.g. common/main.c,cmd/log.c
*
* Return: ``true`` if @file is in @file_list, else ``false``
*/
bool log_has_file(const char *file_list, const char *file);
/* Log format flags (bit numbers) for gd->log_fmt. See log_fmt_chars */
enum log_fmt {
LOGF_CAT = 0,
LOGF_LEVEL,
LOGF_FILE,
LOGF_LINE,
LOGF_FUNC,
LOGF_MSG,
LOGF_COUNT,
LOGF_ALL = 0x3f,
};
/* Handle the 'log test' command */
int do_log_test(struct cmd_tbl *cmdtp, int flag, int argc, char *const argv[]);
/**
* log_add_filter_flags() - Add a new filter to a log device, specifying flags
*
* @drv_name: Driver name to add the filter to (since each driver only has a
* single device)
* @flags: Flags for this filter (``LOGFF_...``)
* @cat_list: List of categories to allow (terminated by %LOGC_END). If empty
* then all categories are permitted. Up to %LOGF_MAX_CATEGORIES entries
* can be provided
* @level: Maximum (or minimum, if %LOGFF_LEVEL_MIN) log level to allow
* @file_list: List of files to allow, separated by comma. If NULL then all
* files are permitted
* Return:
* the sequence number of the new filter (>=0) if the filter was added, or a
* -ve value on error
*/
int log_add_filter_flags(const char *drv_name, enum log_category_t cat_list[],
enum log_level_t level, const char *file_list,
int flags);
/**
* log_add_filter() - Add a new filter to a log device
*
* @drv_name: Driver name to add the filter to (since each driver only has a
* single device)
* @cat_list: List of categories to allow (terminated by %LOGC_END). If empty
* then all categories are permitted. Up to %LOGF_MAX_CATEGORIES entries
* can be provided
* @max_level: Maximum log level to allow
* @file_list: List of files to allow, separated by comma. If %NULL then all
* files are permitted
* Return:
* the sequence number of the new filter (>=0) if the filter was added, or a
* -ve value on error
*/
static inline int log_add_filter(const char *drv_name,
enum log_category_t cat_list[],
enum log_level_t max_level,
const char *file_list)
{
return log_add_filter_flags(drv_name, cat_list, max_level, file_list,
0);
}
/**
* log_remove_filter() - Remove a filter from a log device
*
* @drv_name: Driver name to remove the filter from (since each driver only has
* a single device)
* @filter_num: Filter number to remove (as returned by log_add_filter())
* Return:
* 0 if the filter was removed, -%ENOENT if either the driver or the filter
* number was not found
*/
int log_remove_filter(const char *drv_name, int filter_num);
/**
* log_device_set_enable() - Enable or disable a log device
*
* Devices are referenced by their driver, so use LOG_GET_DRIVER(name) to pass
* the driver to this function. For example if the driver is declared with
* LOG_DRIVER(wibble) then pass LOG_GET_DRIVER(wibble) here.
*
* @drv: Driver of device to enable
* @enable: true to enable, false to disable
* Return: 0 if OK, -ENOENT if the driver was not found
*/
int log_device_set_enable(struct log_driver *drv, bool enable);
#if CONFIG_IS_ENABLED(LOG)
/**
* log_init() - Set up the log system ready for use
*
* Return: 0 if OK, -%ENOMEM if out of memory
*/
int log_init(void);
#else
static inline int log_init(void)
{
return 0;
}
#endif
/**
* log_get_default_format() - get default log format
*
* The default log format is configurable via
* %CONFIG_LOGF_FILE, %CONFIG_LOGF_LINE, and %CONFIG_LOGF_FUNC.
*
* Return: default log format
*/
static inline int log_get_default_format(void)
{
return BIT(LOGF_MSG) |
(IS_ENABLED(CONFIG_LOGF_FILE) ? BIT(LOGF_FILE) : 0) |
(IS_ENABLED(CONFIG_LOGF_LINE) ? BIT(LOGF_LINE) : 0) |
(IS_ENABLED(CONFIG_LOGF_FUNC) ? BIT(LOGF_FUNC) : 0);
}
#endif