u-boot/board/keymile/scripts
Andreas Huber d42a3b7498 km/scripts: replace hardcoded uImage
Replace uImage with ${uimage}.
If uimage is not set, default it to uImage.

Signed-off-by: Andreas Huber <andreas.huber@keymile.com>
Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
2013-02-15 17:47:20 -06:00
..
develop-arm.txt km/common: simplify debug environment 2011-07-27 23:43:33 +02:00
develop-common.txt km/scripts: replace hardcoded uImage 2013-02-15 17:47:20 -06:00
develop-ppc_8xx.txt km/common: simplify debug environment 2011-07-27 23:43:33 +02:00
develop-ppc_82xx.txt km/common: simplify debug environment 2011-07-27 23:43:33 +02:00
ramfs-arm.txt km/common: simplify debug environment 2011-07-27 23:43:33 +02:00
ramfs-common.txt km/scripts: replace hardcoded uImage 2013-02-15 17:47:20 -06:00
ramfs-ppc_8xx.txt km/common: simplify debug environment 2011-07-27 23:43:33 +02:00
ramfs-ppc_82xx.txt km/common: simplify debug environment 2011-07-27 23:43:33 +02:00
README km/common: add toolchain variable 2011-12-20 23:43:45 +01:00

These scripts are needed for our development usecases. Copy this directory
into your tftp root directory to be able to use this scripts.
cp -r <u-boot-repo>/board/keymile/scripts <your_tftp_root>/

To load and configure these usecase, two environment variables in the u-boot
default environment must be parsed:
run develop : setup environment to configure for rootfs via nfs
run ramfs   : setup environment to configure for rootfs in ram

Last change: 24.11.2011

develop-common.txt
============================
This file defines variables for working with rootfs via nfs for powerpc and
arm.

develop-<arch>.txt
============================
This file defines architecture specific variables for working with rootfs via
nfs arm.


ramfs-common.txt
============================
This file defines variables for working with rootfs inside the ram for powerpc
and arm.

ramfs-<arch>.txt
============================
This file defines architecture specific variables for working with rootfs inside
ram.