u-boot/arch/x86/lib/i8259.c
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

128 lines
2.6 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2009
* Graeme Russ, <graeme.russ@gmail.com>
*
* (C) Copyright 2002
* Daniel Engström, Omicron Ceti AB, <daniel@omicron.se>
*/
/*
* This file provides the interrupt handling functionality for systems
* based on the standard PC/AT architecture using two cascaded i8259
* Programmable Interrupt Controllers.
*/
#include <common.h>
#include <asm/io.h>
#include <asm/i8259.h>
#include <asm/ibmpc.h>
#include <asm/interrupt.h>
int i8259_init(void)
{
u8 i;
/* Mask all interrupts */
outb(0xff, MASTER_PIC + IMR);
outb(0xff, SLAVE_PIC + IMR);
/*
* Master PIC
* Place master PIC interrupts at INT20
*/
outb(ICW1_SEL | ICW1_EICW4, MASTER_PIC + ICW1);
outb(0x20, MASTER_PIC + ICW2);
outb(IR2, MASTER_PIC + ICW3);
outb(ICW4_PM, MASTER_PIC + ICW4);
for (i = 0; i < 8; i++)
outb(OCW2_SEOI | i, MASTER_PIC + OCW2);
/*
* Slave PIC
* Place slave PIC interrupts at INT28
*/
outb(ICW1_SEL | ICW1_EICW4, SLAVE_PIC + ICW1);
outb(0x28, SLAVE_PIC + ICW2);
outb(0x02, SLAVE_PIC + ICW3);
outb(ICW4_PM, SLAVE_PIC + ICW4);
for (i = 0; i < 8; i++)
outb(OCW2_SEOI | i, SLAVE_PIC + OCW2);
/*
* Enable cascaded interrupts by unmasking the cascade IRQ pin of
* the master PIC
*/
unmask_irq(2);
/* Interrupt 9 should be level triggered (SCI). The OS might do this */
configure_irq_trigger(9, true);
return 0;
}
void mask_irq(int irq)
{
int imr_port;
if (irq >= SYS_NUM_IRQS)
return;
if (irq > 7)
imr_port = SLAVE_PIC + IMR;
else
imr_port = MASTER_PIC + IMR;
outb(inb(imr_port) | (1 << (irq & 7)), imr_port);
}
void unmask_irq(int irq)
{
int imr_port;
if (irq >= SYS_NUM_IRQS)
return;
if (irq > 7)
imr_port = SLAVE_PIC + IMR;
else
imr_port = MASTER_PIC + IMR;
outb(inb(imr_port) & ~(1 << (irq & 7)), imr_port);
}
void specific_eoi(int irq)
{
if (irq >= SYS_NUM_IRQS)
return;
if (irq > 7) {
/*
* IRQ is on the slave - Issue a corresponding EOI to the
* slave PIC and an EOI for IRQ2 (the cascade interrupt)
* on the master PIC
*/
outb(OCW2_SEOI | (irq & 7), SLAVE_PIC + OCW2);
irq = SEOI_IR2;
}
outb(OCW2_SEOI | irq, MASTER_PIC + OCW2);
}
void configure_irq_trigger(int int_num, bool is_level_triggered)
{
u16 int_bits = inb(ELCR1) | (((u16)inb(ELCR2)) << 8);
debug("%s: current interrupts are 0x%x\n", __func__, int_bits);
if (is_level_triggered)
int_bits |= (1 << int_num);
else
int_bits &= ~(1 << int_num);
/* Write new values */
debug("%s: try to set interrupts 0x%x\n", __func__, int_bits);
outb((u8)(int_bits & 0xff), ELCR1);
outb((u8)(int_bits >> 8), ELCR2);
}