mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-13 16:37:30 +00:00
77f6dabc0a
The GW73xx-C revision and onward replaced the 5-port PCIe switch with a 4-port (dropping PCIe to one of the miniPCIe sockets) due to part availability. This moved the PCI bus of the GbE eth1 device. Use a fixup to adjust the dt accordingly so that local-mac-address assigned from dt works on new revision boards. While we are at it, rename 'blob' to 'fdt' for clarity. Signed-off-by: Tim Harvey <tharvey@gateworks.com> |
||
|---|---|---|
| .. | ||
| eeprom.c | ||
| eeprom.h | ||
| imximage-8mm-lpddr4.cfg | ||
| imximage-8mn-lpddr4.cfg | ||
| imximage-8mp-lpddr4.cfg | ||
| Kconfig | ||
| lpddr4_timing.h | ||
| lpddr4_timing_imx8mm.c | ||
| lpddr4_timing_imx8mm_512mb.c | ||
| lpddr4_timing_imx8mn.c | ||
| lpddr4_timing_imx8mp.c | ||
| MAINTAINERS | ||
| Makefile | ||
| README | ||
| spl.c | ||
| venice.c | ||
U-Boot for the Gateworks i.MX8M Mini Venice Development Kit boards Quick Start =========== - Build the ARM Trusted firmware binary - Get ddr firmware - Build U-Boot - Flash to eMMC - Boot Get and Build the ARM Trusted firmware ====================================== $ git clone https://source.codeaurora.org/external/imx/imx-atf $ git checkout imx_5.4.47_2.2.0 $ make PLAT=imx8mm CROSS_COMPILE=aarch64-linux-gnu- bl31 $ cp build/imx8mm/release/bl31.bin . Get the DDR Firmware ==================== $ wget https://www.nxp.com/lgfiles/NMG/MAD/YOCTO/firmware-imx-8.9.bin $ chmod +x firmware-imx-8.9.bin $ ./firmware-imx-8.9.bin $ cp firmware-imx-8.9/firmware/ddr/synopsys/lpddr4*.bin . Build U-Boot ============ $ make imx8mm_venice_defconfig $ make CROSS_COMPILE=aarch64-linux-gnu- Update eMMC =========== => tftpboot $loadaddr flash.bin => setexpr blkcnt $filesize + 0x1ff && setexpr blkcnt $blkcnt / 0x200 => mmc dev 2 && mmc write $loadaddr 0x42 $blkcnt # for IMX8MM => mmc dev 2 && mmc write $loadaddr 0x40 $blkcnt # for IMX8MN