u-boot/arch/powerpc/cpu/mpc85xx/Makefile
Shengzhou Liu f605079041 powerpc/mpc85xx: Add T1024/T1023 SoC support
Add support for Freescale T1024/T1023 SoC.

The T1024 SoC includes the following function and features:
- Two 64-bit Power architecture e5500 cores, up to 1.4GHz
- private 256KB L2 cache each core and shared 256KB CoreNet platform cache (CPC)
- 32-/64-bit DDR3L/DDR4 SDRAM memory controller with ECC and interleaving support
- Data Path Acceleration Architecture (DPAA) incorporating acceleration
- Four MAC for 1G/2.5G/10G network interfaces (RGMII, SGMII, QSGMII, XFI)
- High-speed peripheral interfaces
  - Three PCI Express 2.0 controllers
- Additional peripheral interfaces
  - One SATA 2.0 controller
  - Two USB 2.0 controllers with integrated PHY
  - Enhanced secure digital host controller (SD/eSDHC/eMMC)
  - Enhanced serial peripheral interface (eSPI)
  - Four I2C controllers
  - Four 2-pin UARTs or two 4-pin UARTs
  - Integrated Flash Controller supporting NAND and NOR flash
- Two 8-channel DMA engines
- Multicore programmable interrupt controller (PIC)
- LCD interface (DIU) with 12 bit dual data rate
- QUICC Engine block supporting TDM, HDLC, and UART
- Deep Sleep power implementaion (wakeup from GPIO/Timer/Ethernet/USB)
- Support for hardware virtualization and partitioning enforcement
- QorIQ Platform's Trust Architecture 2.0

Differences between T1024 and T1023:
  Feature         T1024  T1023
  QUICC Engine:   yes    no
  DIU:            yes    no
  Deep Sleep:     yes    no
  I2C controller: 4      3
  DDR:            64-bit 32-bit
  IFC:            32-bit 28-bit

Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2014-12-05 08:06:14 -08:00

120 lines
3.5 KiB
Makefile

#
# (C) Copyright 2006
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# (C) Copyright 2002,2003 Motorola Inc.
# Xianghua Xiao,X.Xiao@motorola.com
#
# SPDX-License-Identifier: GPL-2.0+
#
MINIMAL=
ifdef CONFIG_SPL_BUILD
ifdef CONFIG_SPL_INIT_MINIMAL
MINIMAL=y
endif
endif
extra-y = start.o resetvec.o
ifdef MINIMAL
obj-y += cpu_init_early.o tlb.o spl_minimal.o
else
obj-$(CONFIG_MP) += release.o
obj-$(CONFIG_CMD_ERRATA) += cmd_errata.o
obj-$(CONFIG_CPM2) += commproc.o
obj-$(CONFIG_CPM2) += ether_fcc.o
obj-$(CONFIG_OF_LIBFDT) += fdt.o
obj-$(CONFIG_FSL_CORENET) += liodn.o
obj-$(CONFIG_MP) += mp.o
obj-$(CONFIG_PCI) += pci.o
obj-$(CONFIG_SYS_DPAA_QBMAN) += portals.o
# various SoC specific assignments
obj-$(CONFIG_PPC_P2041) += p2041_ids.o
obj-$(CONFIG_PPC_P3041) += p3041_ids.o
obj-$(CONFIG_PPC_P4080) += p4080_ids.o
obj-$(CONFIG_PPC_P5020) += p5020_ids.o
obj-$(CONFIG_PPC_P5040) += p5040_ids.o
obj-$(CONFIG_PPC_T4240) += t4240_ids.o
obj-$(CONFIG_PPC_T4160) += t4240_ids.o
obj-$(CONFIG_PPC_T4080) += t4240_ids.o
obj-$(CONFIG_PPC_B4420) += b4860_ids.o
obj-$(CONFIG_PPC_B4860) += b4860_ids.o
obj-$(CONFIG_PPC_T1040) += t1040_ids.o
obj-$(CONFIG_PPC_T1042) += t1040_ids.o
obj-$(CONFIG_PPC_T1020) += t1040_ids.o
obj-$(CONFIG_PPC_T1022) += t1040_ids.o
obj-$(CONFIG_PPC_T1023) += t1024_ids.o
obj-$(CONFIG_PPC_T1024) += t1024_ids.o
obj-$(CONFIG_PPC_T2080) += t2080_ids.o
obj-$(CONFIG_PPC_T2081) += t2080_ids.o
obj-$(CONFIG_QE) += qe_io.o
obj-$(CONFIG_CPM2) += serial_scc.o
obj-$(CONFIG_SYS_FSL_QORIQ_CHASSIS1) += fsl_corenet_serdes.o
obj-$(CONFIG_SYS_FSL_QORIQ_CHASSIS2) += fsl_corenet2_serdes.o
# SoC specific SERDES support
obj-$(CONFIG_PPC_C29X) += c29x_serdes.o
obj-$(CONFIG_MPC8536) += mpc8536_serdes.o
obj-$(CONFIG_MPC8544) += mpc8544_serdes.o
obj-$(CONFIG_MPC8548) += mpc8548_serdes.o
obj-$(CONFIG_MPC8568) += mpc8568_serdes.o
obj-$(CONFIG_MPC8569) += mpc8569_serdes.o
obj-$(CONFIG_MPC8572) += mpc8572_serdes.o
obj-$(CONFIG_P1010) += p1010_serdes.o
obj-$(CONFIG_P1011) += p1021_serdes.o
obj-$(CONFIG_P1012) += p1021_serdes.o
obj-$(CONFIG_P1013) += p1022_serdes.o
obj-$(CONFIG_P1014) += p1010_serdes.o
obj-$(CONFIG_P1017) += p1023_serdes.o
obj-$(CONFIG_P1020) += p1021_serdes.o
obj-$(CONFIG_P1021) += p1021_serdes.o
obj-$(CONFIG_P1022) += p1022_serdes.o
obj-$(CONFIG_P1023) += p1023_serdes.o
obj-$(CONFIG_P1024) += p1021_serdes.o
obj-$(CONFIG_P1025) += p1021_serdes.o
obj-$(CONFIG_P2010) += p2020_serdes.o
obj-$(CONFIG_P2020) += p2020_serdes.o
obj-$(CONFIG_PPC_P2041) += p2041_serdes.o
obj-$(CONFIG_PPC_P3041) += p3041_serdes.o
obj-$(CONFIG_PPC_P4080) += p4080_serdes.o
obj-$(CONFIG_PPC_P5020) += p5020_serdes.o
obj-$(CONFIG_PPC_P5040) += p5040_serdes.o
obj-$(CONFIG_PPC_T4240) += t4240_serdes.o
obj-$(CONFIG_PPC_T4160) += t4240_serdes.o
obj-$(CONFIG_PPC_T4080) += t4240_serdes.o
obj-$(CONFIG_PPC_B4420) += b4860_serdes.o
obj-$(CONFIG_PPC_B4860) += b4860_serdes.o
obj-$(CONFIG_BSC9132) += bsc9132_serdes.o
obj-$(CONFIG_PPC_T1040) += t1040_serdes.o
obj-$(CONFIG_PPC_T1042) += t1040_serdes.o
obj-$(CONFIG_PPC_T1020) += t1040_serdes.o
obj-$(CONFIG_PPC_T1022) += t1040_serdes.o
obj-$(CONFIG_PPC_T1023) += t1024_serdes.o
obj-$(CONFIG_PPC_T1024) += t1024_serdes.o
obj-$(CONFIG_PPC_T2080) += t2080_serdes.o
obj-$(CONFIG_PPC_T2081) += t2080_serdes.o
obj-y += cpu.o
obj-y += cpu_init.o
obj-y += cpu_init_early.o
obj-y += interrupts.o
ifneq ($(CONFIG_QEMU_E500),y)
obj-y += speed.o
endif
obj-y += tlb.o
obj-y += traps.o
# Stub implementations of cache management functions for USB
obj-y += cache.o
endif # not minimal