mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-19 03:08:31 +00:00
a13110a99f
The RK3399-Q7 SoM is a Qseven-compatible (70mm x 70mm, MXM-230 connector) system-on-module from Theobroma Systems, featuring the Rockchip RK3399. It provides the following feature set: * up to 4GB DDR3 * on-module SPI-NOR flash * on-module eMMC (with 8-bit interace) * SD card (on a baseboad) via edge connector * Gigabit Ethernet w/ on-module Micrel KSZ9031 GbE PHY * HDMI/eDP/MIPI displays * 2x MIPI-CSI * USB - 1x USB 3.0 dual-role (direct connection) - 2x USB 3.0 host + 1x USB 2.0 (on-module USB 3.0 hub) * on-module STM32 Cortex-M0 companion controller, implementing: - low-power RTC functionality (ISL1208 emulation) - fan controller (AMC6821 emulation) - USB<->CAN bridge controller Note that we use a multi-payload FIT image for booting and have Cortex-M0 payload in a separate subimage: we thus rely on the FIT image loader to put it into the SRAM region that ATF expects it in. Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com> Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Fixed build warning on puma-rk3399: Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
71 lines
1.5 KiB
C
71 lines
1.5 KiB
C
/*
|
|
* (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <dm/pinctrl.h>
|
|
#include <dm/uclass-internal.h>
|
|
#include <asm/arch/periph.h>
|
|
#include <power/regulator.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
int board_init(void)
|
|
{
|
|
struct udevice *pinctrl, *regulator;
|
|
int ret;
|
|
|
|
/*
|
|
* The PWM does not have decicated interrupt number in dts and can
|
|
* not get periph_id by pinctrl framework, so let's init them here.
|
|
* The PWM2 and PWM3 are for pwm regulators.
|
|
*/
|
|
ret = uclass_get_device(UCLASS_PINCTRL, 0, &pinctrl);
|
|
if (ret) {
|
|
debug("%s: Cannot find pinctrl device\n", __func__);
|
|
goto out;
|
|
}
|
|
|
|
ret = pinctrl_request_noflags(pinctrl, PERIPH_ID_PWM2);
|
|
if (ret) {
|
|
debug("%s PWM2 pinctrl init fail!\n", __func__);
|
|
goto out;
|
|
}
|
|
|
|
/* rk3399 need to init vdd_center to get the correct output voltage */
|
|
ret = regulator_get_by_platname("vdd_center", ®ulator);
|
|
if (ret)
|
|
debug("%s: Cannot get vdd_center regulator\n", __func__);
|
|
|
|
ret = regulator_get_by_platname("vcc5v0_host", ®ulator);
|
|
if (ret) {
|
|
debug("%s vcc5v0_host init fail! ret %d\n", __func__, ret);
|
|
goto out;
|
|
}
|
|
|
|
ret = regulator_set_enable(regulator, true);
|
|
if (ret) {
|
|
debug("%s vcc5v0-host-en set fail!\n", __func__);
|
|
goto out;
|
|
}
|
|
|
|
out:
|
|
return 0;
|
|
}
|
|
|
|
int dram_init(void)
|
|
{
|
|
gd->ram_size = 0x80000000;
|
|
return 0;
|
|
}
|
|
|
|
int dram_init_banksize(void)
|
|
{
|
|
/* Reserve 0x200000 for ATF bl31 */
|
|
gd->bd->bi_dram[0].start = 0x200000;
|
|
gd->bd->bi_dram[0].size = 0x7e000000;
|
|
|
|
return 0;
|
|
}
|