mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-12 14:23:00 +00:00
f5d98b01e1
Fix two occurrences where 'signing' is misspelled. Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Tim Harvey <tharvey@gateworks.com>
427 lines
16 KiB
Text
427 lines
16 KiB
Text
+=======================================================+
|
|
+ i.MX6, i.MX7 U-Boot Secure Boot guide using HABv4 +
|
|
+=======================================================+
|
|
|
|
1. HABv4 secure boot process
|
|
-----------------------------
|
|
|
|
This document describes a step-by-step procedure on how to sign and securely
|
|
boot an U-Boot image for non-SPL targets. It is assumed that the reader is
|
|
familiar with basic HAB concepts and with the PKI tree generation.
|
|
|
|
Details about HAB can be found in the application note AN4581[1] and in the
|
|
introduction_habv4.txt document.
|
|
|
|
1.1 Building a u-boot-dtb.imx image supporting secure boot
|
|
-----------------------------------------------------------
|
|
|
|
The U-Boot provides support to secure boot configuration and also provide
|
|
access to the HAB APIs exposed by the ROM vector table, the support is
|
|
enabled by selecting the CONFIG_IMX_HAB option.
|
|
|
|
When built with this configuration, the U-Boot provides extra functions for
|
|
HAB, such as the HAB status logs retrievement through the hab_status command
|
|
and support for extending the root of trust.
|
|
|
|
The U-Boot also correctly pads the final image by aligning to the next 0xC00
|
|
address, so the CSF signature data generated by CST can be concatenated to
|
|
image.
|
|
|
|
The diagram below illustrate a signed u-boot-dtb.imx image layout:
|
|
|
|
------- +-----------------------------+ <-- *start
|
|
^ | Image Vector Table |
|
|
| +-----------------------------+ <-- *boot_data
|
|
| | Boot Data |
|
|
| +-----------------------------+ <-- *dcd
|
|
| | DCD Table |
|
|
| +-----------------------------+
|
|
Signed | | Padding |
|
|
Data | +-----------------------------+ <-- *entry
|
|
| | |
|
|
| | |
|
|
| | u-boot-dtb.bin |
|
|
| | |
|
|
| | |
|
|
| +-----------------------------+
|
|
v | Padding |
|
|
------- +-----------------------------+ <-- *csf
|
|
| |
|
|
| Command Sequence File (CSF) |
|
|
| |
|
|
+-----------------------------+
|
|
| Padding (optional) |
|
|
+-----------------------------+
|
|
|
|
1.2 Enabling the secure boot support
|
|
-------------------------------------
|
|
|
|
The first step is to generate an U-Boot image supporting the HAB features
|
|
mentioned above, this can be achieved by adding CONFIG_IMX_HAB to the
|
|
build configuration:
|
|
|
|
- Defconfig:
|
|
|
|
CONFIG_IMX_HAB=y
|
|
|
|
- Kconfig:
|
|
|
|
ARM architecture -> Support i.MX HAB features
|
|
|
|
1.3 Creating the CSF description file
|
|
--------------------------------------
|
|
|
|
The CSF contains all the commands that the HAB executes during the secure
|
|
boot. These commands instruct the HAB on which memory areas of the image
|
|
to authenticate, which keys to install, use and etc.
|
|
|
|
CSF examples are available under doc/imx/habv4/csf_examples/ directory.
|
|
|
|
A build log containing the "Authenticate Data" parameters is available after
|
|
the U-Boot build, the example below is a log for mx7dsabresd_defconfig target:
|
|
|
|
- mkimage build log:
|
|
|
|
$ cat u-boot-dtb.imx.log
|
|
|
|
Image Type: Freescale IMX Boot Image
|
|
Image Ver: 2 (i.MX53/6/7 compatible)
|
|
Mode: DCD
|
|
Data Size: 667648 Bytes = 652.00 KiB = 0.64 MiB
|
|
Load Address: 877ff420
|
|
Entry Point: 87800000
|
|
HAB Blocks: 0x877ff400 0x00000000 0x0009ec00
|
|
^^^^^^^^^^ ^^^^^^^^^^ ^^^^^^^^^^
|
|
| | |
|
|
| | ------- (1)
|
|
| |
|
|
| ------------------ (2)
|
|
|
|
|
----------------------------- (3)
|
|
|
|
(1) Size of area in file u-boot-dtb.imx to sign.
|
|
This area should include the IVT, the Boot Data the DCD
|
|
and the U-Boot itself.
|
|
(2) Start of area in u-boot-dtb.imx to sign.
|
|
(3) Start of area in RAM to authenticate.
|
|
|
|
- In "Authenticate Data" CSF command users can copy and past the output
|
|
addresses:
|
|
|
|
Block = 0x877ff400 0x00000000 0x0009ec00 "u-boot-dtb.imx"
|
|
|
|
1.4 Signing the U-Boot binary
|
|
------------------------------
|
|
|
|
The CST tool is used for signing the U-Boot binary and generating a CSF binary,
|
|
users should input the CSF description file created in the step above and
|
|
should receive a CSF binary, which contains the CSF commands, SRK table,
|
|
signatures and certificates.
|
|
|
|
- Create CSF binary file:
|
|
|
|
$ ./cst -i csf_uboot.txt -o csf_uboot.bin
|
|
|
|
- Append CSF signature to the end of U-Boot image:
|
|
|
|
$ cat u-boot-dtb.imx csf_uboot.bin > u-boot-signed.imx
|
|
|
|
The u-boot-signed.imx is the signed binary and should be flashed into the boot
|
|
media.
|
|
|
|
- Flash signed U-Boot binary:
|
|
|
|
$ sudo dd if=u-boot-signed.imx of=/dev/sd<x> bs=1K seek=1 && sync
|
|
|
|
1.5 Programming SRK Hash
|
|
-------------------------
|
|
|
|
As explained in AN4581[1] and in introduction_habv4.txt document the SRK Hash
|
|
fuse values are generated by the srktool and should be programmed in the
|
|
SoC SRK_HASH[255:0] fuses.
|
|
|
|
Be careful when programming these values, as this data is the basis for the
|
|
root of trust. An error in SRK Hash results in a part that does not boot.
|
|
|
|
The U-Boot fuse tool can be used for programming eFuses on i.MX SoCs.
|
|
|
|
- Dump SRK Hash fuses values in host machine:
|
|
|
|
$ hexdump -e '/4 "0x"' -e '/4 "%X""\n"' SRK_1_2_3_4_fuse.bin
|
|
0x20593752
|
|
0x6ACE6962
|
|
0x26E0D06C
|
|
0xFC600661
|
|
0x1240E88F
|
|
0x1209F144
|
|
0x831C8117
|
|
0x1190FD4D
|
|
|
|
- Program SRK_HASH[255:0] fuses, using i.MX6 series as example:
|
|
|
|
=> fuse prog 3 0 0x20593752
|
|
=> fuse prog 3 1 0x6ACE6962
|
|
=> fuse prog 3 2 0x26E0D06C
|
|
=> fuse prog 3 3 0xFC600661
|
|
=> fuse prog 3 4 0x1240E88F
|
|
=> fuse prog 3 5 0x1209F144
|
|
=> fuse prog 3 6 0x831C8117
|
|
=> fuse prog 3 7 0x1190FD4D
|
|
|
|
The table below lists the SRK_HASH bank and word according to the i.MX device:
|
|
|
|
+-------------------+---------------+---------------+---------------+
|
|
| | i.MX6 Series | i.MX7D/S | i.MX7ULP |
|
|
+-------------------+---------------+---------------+---------------+
|
|
| SRK_HASH[31:00] | bank 3 word 0 | bank 6 word 0 | bank 5 word 0 |
|
|
+-------------------+---------------+---------------+---------------+
|
|
| SRK_HASH[63:32] | bank 3 word 1 | bank 6 word 1 | bank 5 word 1 |
|
|
+-------------------+---------------+---------------+---------------+
|
|
| SRK_HASH[95:64] | bank 3 word 2 | bank 6 word 2 | bank 5 word 2 |
|
|
+-------------------+---------------+---------------+---------------+
|
|
| SRK_HASH[127:96] | bank 3 word 3 | bank 6 word 3 | bank 5 word 3 |
|
|
+-------------------+---------------+---------------+---------------+
|
|
| SRK_HASH[159:128] | bank 3 word 4 | bank 7 word 0 | bank 5 word 4 |
|
|
+-------------------+---------------+---------------+---------------+
|
|
| SRK_HASH[191:160] | bank 3 word 5 | bank 7 word 1 | bank 5 word 5 |
|
|
+-------------------+---------------+---------------+---------------+
|
|
| SRK_HASH[223:192] | bank 3 word 6 | bank 7 word 2 | bank 5 word 6 |
|
|
+-------------------+---------------+---------------+---------------+
|
|
| SRK_HASH[255:224] | bank 3 word 7 | bank 7 word 3 | bank 5 word 7 |
|
|
+-------------------+---------------+---------------+---------------+
|
|
|
|
1.6 Verifying HAB events
|
|
-------------------------
|
|
|
|
The next step is to verify that the signature attached to U-Boot is
|
|
successfully processed without errors. HAB generates events when processing
|
|
the commands if it encounters issues.
|
|
|
|
The hab_status U-Boot command call the hab_report_event() and hab_status()
|
|
HAB API functions to verify the processor security configuration and status.
|
|
This command displays any events that were generated during the process.
|
|
|
|
Prior to closing the device users should ensure no HAB events were found, as
|
|
the example below:
|
|
|
|
- Verify HAB events:
|
|
|
|
=> hab_status
|
|
|
|
Secure boot disabled
|
|
|
|
HAB Configuration: 0xf0, HAB State: 0x66
|
|
No HAB Events Found!
|
|
|
|
1.6.1 Verifying HAB events in i.MX7ULP
|
|
---------------------------------------
|
|
|
|
When booting i.MX7ULP in low power or dual boot modes the M4 binary is
|
|
authenticated by an independent HAB in M4 ROM code using a
|
|
different SRK key set.
|
|
|
|
The U-Boot provides a M4 option in hab_status command so users can retrieve
|
|
M4 HAB failure and warning events.
|
|
|
|
- Verify HAB M4 events:
|
|
|
|
=> hab_status m4
|
|
|
|
Secure boot disabled
|
|
|
|
HAB Configuration: 0xf0, HAB State: 0x66
|
|
No HAB Events Found!
|
|
|
|
As HAB M4 API cannot be called from A7 core the command is parsing the M4 HAB
|
|
persistent memory region, M4 software should not modify this reserved region.
|
|
|
|
Details about HAB persistent memory region can be found in AN12263[2].
|
|
|
|
1.7 Closing the device
|
|
-----------------------
|
|
|
|
After the device successfully boots a signed image without generating any HAB
|
|
events, it is safe to close the device. This is the last step in the HAB
|
|
process, and is achieved by programming the SEC_CONFIG[1] fuse bit.
|
|
|
|
Once the fuse is programmed, the chip does not load an image that has not been
|
|
signed using the correct PKI tree.
|
|
|
|
- Program SEC_CONFIG[1] fuse, using i.MX6 series as example:
|
|
|
|
=> fuse prog 0 6 0x00000002
|
|
|
|
The table below list the SEC_CONFIG[1] bank and word according to the i.MX
|
|
device:
|
|
|
|
+--------------+-----------------+------------+
|
|
| Device | Bank and Word | Value |
|
|
+--------------+-----------------+------------+
|
|
| i.MX6 Series | bank 0 word 6 | 0x00000002 |
|
|
+--------------+-----------------+------------+
|
|
| i.MX7D/S | bank 1 word 3 | 0x02000000 |
|
|
+--------------+-----------------+------------+
|
|
| i.MX7ULP | bank 29 word 6 | 0x80000000 |
|
|
+--------------+-----------------+------------+
|
|
|
|
1.8 Completely secure the device
|
|
---------------------------------
|
|
|
|
Additional fuses can be programmed for completely secure the device, more
|
|
details about these fuses and their possible impact can be found at AN4581[1].
|
|
|
|
- Program SRK_LOCK, using i.MX6 series as example:
|
|
|
|
=> fuse prog 0 0 0x4000
|
|
|
|
- Program DIR_BT_DIS, using i.MX6 series as example:
|
|
|
|
=> fuse prog 0 6 0x8
|
|
|
|
- Program SJC_DISABLE, using i.MX6 series as example:
|
|
|
|
=> fuse prog 0 6 0x100000
|
|
|
|
- JTAG_SMODE, using i.MX6 series as example:
|
|
|
|
=> fuse prog 0 6 0xC00000
|
|
|
|
The table below list the SRK_LOCK, DIR_BT_DIS, SJC_DISABLE, and JTAG_SMODE bank
|
|
and word according to the i.MX device:
|
|
|
|
+--------------+---------------+------------+
|
|
| Device | Bank and Word | Value |
|
|
+--------------+---------------+------------+
|
|
| SRK_LOCK |
|
|
+-------------------------------------------+
|
|
| i.MX6 Series | bank 0 word 0 | 0x00004000 |
|
|
+--------------+---------------+------------+
|
|
| i.MX7D/S | bank 0 word 0 | 0x00000200 |
|
|
+--------------+---------------+------------+
|
|
| i.MX7ULP | bank 1 word 1 | 0x00000080 |
|
|
+--------------+---------------+------------+
|
|
| DIR_BT_DIS |
|
|
+-------------------------------------------+
|
|
| i.MX6 Series | bank 0 word 6 | 0x00000008 |
|
|
+--------------+---------------+------------+
|
|
| i.MX7D/S | bank 1 word 3 | 0x08000000 |
|
|
+--------------+---------------+------------+
|
|
| i.MX7ULP | bank 1 word 1 | 0x00002000 |
|
|
+--------------+---------------+------------+
|
|
| SJC_DISABLE |
|
|
+-------------------------------------------+
|
|
| i.MX6 Series | bank 0 word 6 | 0x00100000 |
|
|
+--------------+---------------+------------+
|
|
| i.MX7D/S | bank 1 word 3 | 0x00200000 |
|
|
+--------------+---------------+------------+
|
|
| i.MX7ULP | bank 1 word 1 | 0x00000020 |
|
|
+--------------+---------------+------------+
|
|
| JTAG_SMODE |
|
|
+-------------------------------------------+
|
|
| i.MX6 Series | bank 0 word 6 | 0x00C00000 |
|
|
+--------------+---------------+------------+
|
|
| i.MX7D/S | bank 1 word 3 | 0x00C00000 |
|
|
+--------------+---------------+------------+
|
|
| i.MX7ULP | bank 1 word 1 | 0x000000C0 |
|
|
+--------------+---------------+------------+
|
|
|
|
2. Extending the root of trust
|
|
-------------------------------
|
|
|
|
The High Assurance Boot (HAB) code located in the on-chip ROM provides an
|
|
Application Programming Interface (API) making it possible to call back
|
|
into the HAB code for authenticating additional boot images.
|
|
|
|
The U-Boot supports this feature and can be used to authenticate the Linux
|
|
Kernel Image.
|
|
|
|
The process of signing an additional image is similar to the U-Boot.
|
|
The diagram below illustrate the zImage layout:
|
|
|
|
------- +-----------------------------+ <-- *load_address
|
|
^ | |
|
|
| | |
|
|
| | |
|
|
| | |
|
|
| | zImage |
|
|
Signed | | |
|
|
Data | | |
|
|
| | |
|
|
| +-----------------------------+
|
|
| | Padding Next Boundary |
|
|
| +-----------------------------+ <-- *ivt
|
|
v | Image Vector Table |
|
|
------- +-----------------------------+ <-- *csf
|
|
| |
|
|
| Command Sequence File (CSF) |
|
|
| |
|
|
+-----------------------------+
|
|
| Padding (optional) |
|
|
+-----------------------------+
|
|
|
|
2.1 Padding the image
|
|
----------------------
|
|
|
|
The zImage must be padded to the next boundary address (0x1000), for instance
|
|
if the image size is 0x649920 it must be padded to 0x64A000.
|
|
|
|
The tool objcopy can be used for padding the image.
|
|
|
|
- Pad the zImage:
|
|
|
|
$ objcopy -I binary -O binary --pad-to 0x64A000 --gap-fill=0x00 \
|
|
zImage zImage_pad.bin
|
|
|
|
2.2 Generating Image Vector Table
|
|
----------------------------------
|
|
|
|
The HAB code requires an Image Vector Table (IVT) for determining the image
|
|
length and the CSF location. Since zImage does not include an IVT this has
|
|
to be manually created and appended to the end of the padded zImage, the
|
|
script genIVT.pl in script_examples directory can be used as reference.
|
|
|
|
- Generate IVT:
|
|
|
|
$ genIVT.pl
|
|
|
|
Note: The load Address may change depending on the device.
|
|
|
|
- Append the ivt.bin at the end of the padded zImage:
|
|
|
|
$ cat zImage_pad.bin ivt.bin > zImage_pad_ivt.bin
|
|
|
|
2.3 Signing the image
|
|
----------------------
|
|
|
|
A CSF file has to be created to sign the image. HAB does not allow to change
|
|
the SRK once the first image is authenticated, so the same SRK key used in
|
|
U-Boot must be used when extending the root of trust.
|
|
|
|
CSF examples are available in ../csf_examples/additional_images/
|
|
directory.
|
|
|
|
- Create CSF binary file:
|
|
|
|
$ ./cst --i csf_additional_images.txt --o csf_zImage.bin
|
|
|
|
- Attach the CSF binary to the end of the image:
|
|
|
|
$ cat zImage_pad_ivt.bin csf_zImage.bin > zImage_signed.bin
|
|
|
|
2.4 Verifying HAB events
|
|
-------------------------
|
|
|
|
The U-Boot includes the hab_auth_img command which can be used for
|
|
authenticating and troubleshooting the signed image, zImage must be
|
|
loaded at the load address specified in the IVT.
|
|
|
|
- Authenticate additional image:
|
|
|
|
=> hab_auth_img <Load Address> <Image Size> <IVT Offset>
|
|
|
|
If no HAB events were found the zImage is successfully signed.
|
|
|
|
References:
|
|
[1] AN4581: "Secure Boot on i.MX 50, i.MX 53, i.MX 6 and i.MX 7 Series using
|
|
HABv4" - Rev 2.
|
|
[2] AN12263: "HABv4 RVT Guidelines and Recommendations" - Rev 0.
|