Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-10 15:14:43 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/common/Kconfig
Peter Robinson 324d77998e Define default CONFIG_PREBOOT with right config option 
The 44758771ee commit removes CONFIG_PREBOOT but actually sets the USE_PREBOOT
Kconfig option which isn't CONFIG_PREBOOT and is also a bool option which means
we regress because 'usb start' isn't run when expected, it should also be run
for devices that have USB storage because keyboards aren't the only thing we
might need the USB bus for.

Fixes: 44758771ee ("arm: move CONFIG_PREBOOT="usb start" to KConfig")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Cc: Jonas Smedegaard <dr@jones.dk>
Cc: Neil Armstrong <narmstrong@baylibre.com>
2020-09-29 13:17:33 -04:00

1148 lines
39 KiB
Text
Raw Blame History

menu "Boot timing"
config BOOTSTAGE
bool "Boot timing and reporting"
help
Enable recording of boot time while booting. To use it, insert
calls to bootstage_mark() with a suitable BOOTSTAGE_ID from
bootstage.h. Only a single entry is recorded for each ID. You can
give the entry a name with bootstage_mark_name(). You can also
record elapsed time in a particular stage using bootstage_start()
before starting and bootstage_accum() when finished. Bootstage will
add up all the accumulated time and report it.
Normally, IDs are defined in bootstage.h but a small number of
additional 'user' IDs can be used by passing BOOTSTAGE_ID_ALLOC
as the ID.
Calls to show_boot_progress() will also result in log entries but
these will not have names.
config SPL_BOOTSTAGE
bool "Boot timing and reported in SPL"
depends on BOOTSTAGE
help
Enable recording of boot time in SPL. To make this visible to U-Boot
proper, enable BOOTSTAGE_STASH as well. This will stash the timing
information when SPL finishes and load it when U-Boot proper starts
up.
config TPL_BOOTSTAGE
bool "Boot timing and reported in TPL"
depends on BOOTSTAGE
help
Enable recording of boot time in SPL. To make this visible to U-Boot
proper, enable BOOTSTAGE_STASH as well. This will stash the timing
information when TPL finishes and load it when U-Boot proper starts
up.
config BOOTSTAGE_REPORT
bool "Display a detailed boot timing report before booting the OS"
depends on BOOTSTAGE
help
Enable output of a boot time report just before the OS is booted.
This shows how long it took U-Boot to go through each stage of the
boot process. The report looks something like this:
Timer summary in microseconds:
Mark Elapsed Stage
0 0 reset
3,575,678 3,575,678 board_init_f start
3,575,695 17 arch_cpu_init A9
3,575,777 82 arch_cpu_init done
3,659,598 83,821 board_init_r start
3,910,375 250,777 main_loop
29,916,167 26,005,792 bootm_start
30,361,327 445,160 start_kernel
config BOOTSTAGE_RECORD_COUNT
int "Number of boot stage records to store"
default 30
help
This is the size of the bootstage record list and is the maximum
number of bootstage records that can be recorded.
config SPL_BOOTSTAGE_RECORD_COUNT
int "Number of boot stage records to store for SPL"
default 5
help
This is the size of the bootstage record list and is the maximum
number of bootstage records that can be recorded.
config TPL_BOOTSTAGE_RECORD_COUNT
int "Number of boot stage records to store for TPL"
default 5
help
This is the size of the bootstage record list and is the maximum
number of bootstage records that can be recorded.
config BOOTSTAGE_FDT
bool "Store boot timing information in the OS device tree"
depends on BOOTSTAGE
help
Stash the bootstage information in the FDT. A root 'bootstage'
node is created with each bootstage id as a child. Each child
has a 'name' property and either 'mark' containing the
mark time in microseconds, or 'accum' containing the
accumulated time for that bootstage id in microseconds.
For example:
bootstage {
154 {
name = "board_init_f";
mark = <3575678>;
};
170 {
name = "lcd";
accum = <33482>;
};
};
Code in the Linux kernel can find this in /proc/devicetree.
config BOOTSTAGE_STASH
bool "Stash the boot timing information in memory before booting OS"
depends on BOOTSTAGE
help
Some OSes do not support device tree. Bootstage can instead write
the boot timing information in a binary format at a given address.
This happens through a call to bootstage_stash(), typically in
the CPU's cleanup_before_linux() function. You can use the
'bootstage stash' and 'bootstage unstash' commands to do this on
the command line.
config BOOTSTAGE_STASH_ADDR
hex "Address to stash boot timing information"
default 0
help
Provide an address which will not be overwritten by the OS when it
starts, so that it can read this information when ready.
config BOOTSTAGE_STASH_SIZE
hex "Size of boot timing stash region"
default 0x1000
help
This should be large enough to hold the bootstage stash. A value of
4096 (4KiB) is normally plenty.
config SHOW_BOOT_PROGRESS
bool "Show boot progress in a board-specific manner"
help
Defining this option allows to add some board-specific code (calling
a user-provided function show_boot_progress(int) that enables you to
show the system's boot progress on some display (for example, some
LEDs) on your board. At the moment, the following checkpoints are
implemented:
Legacy uImage format:
Arg Where When
1 common/cmd_bootm.c before attempting to boot an image
-1 common/cmd_bootm.c Image header has bad magic number
2 common/cmd_bootm.c Image header has correct magic number
-2 common/cmd_bootm.c Image header has bad checksum
3 common/cmd_bootm.c Image header has correct checksum
-3 common/cmd_bootm.c Image data has bad checksum
4 common/cmd_bootm.c Image data has correct checksum
-4 common/cmd_bootm.c Image is for unsupported architecture
5 common/cmd_bootm.c Architecture check OK
-5 common/cmd_bootm.c Wrong Image Type (not kernel, multi)
6 common/cmd_bootm.c Image Type check OK
-6 common/cmd_bootm.c gunzip uncompression error
-7 common/cmd_bootm.c Unimplemented compression type
7 common/cmd_bootm.c Uncompression OK
8 common/cmd_bootm.c No uncompress/copy overwrite error
-9 common/cmd_bootm.c Unsupported OS (not Linux, BSD, VxWorks, QNX)
9 common/image.c Start initial ramdisk verification
-10 common/image.c Ramdisk header has bad magic number
-11 common/image.c Ramdisk header has bad checksum
10 common/image.c Ramdisk header is OK
-12 common/image.c Ramdisk data has bad checksum
11 common/image.c Ramdisk data has correct checksum
12 common/image.c Ramdisk verification complete, start loading
-13 common/image.c Wrong Image Type (not PPC Linux ramdisk)
13 common/image.c Start multifile image verification
14 common/image.c No initial ramdisk, no multifile, continue.
15 arch/<arch>/lib/bootm.c All preparation done, transferring control to OS
-30 arch/powerpc/lib/board.c Fatal error, hang the system
-31 post/post.c POST test failed, detected by post_output_backlog()
-32 post/post.c POST test failed, detected by post_run_single()
34 common/cmd_doc.c before loading a Image from a DOC device
-35 common/cmd_doc.c Bad usage of "doc" command
35 common/cmd_doc.c correct usage of "doc" command
-36 common/cmd_doc.c No boot device
36 common/cmd_doc.c correct boot device
-37 common/cmd_doc.c Unknown Chip ID on boot device
37 common/cmd_doc.c correct chip ID found, device available
-38 common/cmd_doc.c Read Error on boot device
38 common/cmd_doc.c reading Image header from DOC device OK
-39 common/cmd_doc.c Image header has bad magic number
39 common/cmd_doc.c Image header has correct magic number
-40 common/cmd_doc.c Error reading Image from DOC device
40 common/cmd_doc.c Image header has correct magic number
41 common/cmd_ide.c before loading a Image from a IDE device
-42 common/cmd_ide.c Bad usage of "ide" command
42 common/cmd_ide.c correct usage of "ide" command
-43 common/cmd_ide.c No boot device
43 common/cmd_ide.c boot device found
-44 common/cmd_ide.c Device not available
44 common/cmd_ide.c Device available
-45 common/cmd_ide.c wrong partition selected
45 common/cmd_ide.c partition selected
-46 common/cmd_ide.c Unknown partition table
46 common/cmd_ide.c valid partition table found
-47 common/cmd_ide.c Invalid partition type
47 common/cmd_ide.c correct partition type
-48 common/cmd_ide.c Error reading Image Header on boot device
48 common/cmd_ide.c reading Image Header from IDE device OK
-49 common/cmd_ide.c Image header has bad magic number
49 common/cmd_ide.c Image header has correct magic number
-50 common/cmd_ide.c Image header has bad checksum
50 common/cmd_ide.c Image header has correct checksum
-51 common/cmd_ide.c Error reading Image from IDE device
51 common/cmd_ide.c reading Image from IDE device OK
52 common/cmd_nand.c before loading a Image from a NAND device
-53 common/cmd_nand.c Bad usage of "nand" command
53 common/cmd_nand.c correct usage of "nand" command
-54 common/cmd_nand.c No boot device
54 common/cmd_nand.c boot device found
-55 common/cmd_nand.c Unknown Chip ID on boot device
55 common/cmd_nand.c correct chip ID found, device available
-56 common/cmd_nand.c Error reading Image Header on boot device
56 common/cmd_nand.c reading Image Header from NAND device OK
-57 common/cmd_nand.c Image header has bad magic number
57 common/cmd_nand.c Image header has correct magic number
-58 common/cmd_nand.c Error reading Image from NAND device
58 common/cmd_nand.c reading Image from NAND device OK
-60 common/env_common.c Environment has a bad CRC, using default
64 net/eth.c starting with Ethernet configuration.
-64 net/eth.c no Ethernet found.
65 net/eth.c Ethernet found.
-80 common/cmd_net.c usage wrong
80 common/cmd_net.c before calling net_loop()
-81 common/cmd_net.c some error in net_loop() occurred
81 common/cmd_net.c net_loop() back without error
-82 common/cmd_net.c size == 0 (File with size 0 loaded)
82 common/cmd_net.c trying automatic boot
83 common/cmd_net.c running "source" command
-83 common/cmd_net.c some error in automatic boot or "source" command
84 common/cmd_net.c end without errors
FIT uImage format:
Arg Where When
100 common/cmd_bootm.c Kernel FIT Image has correct format
-100 common/cmd_bootm.c Kernel FIT Image has incorrect format
101 common/cmd_bootm.c No Kernel subimage unit name, using configuration
-101 common/cmd_bootm.c Can't get configuration for kernel subimage
102 common/cmd_bootm.c Kernel unit name specified
-103 common/cmd_bootm.c Can't get kernel subimage node offset
103 common/cmd_bootm.c Found configuration node
104 common/cmd_bootm.c Got kernel subimage node offset
-104 common/cmd_bootm.c Kernel subimage hash verification failed
105 common/cmd_bootm.c Kernel subimage hash verification OK
-105 common/cmd_bootm.c Kernel subimage is for unsupported architecture
106 common/cmd_bootm.c Architecture check OK
-106 common/cmd_bootm.c Kernel subimage has wrong type
107 common/cmd_bootm.c Kernel subimage type OK
-107 common/cmd_bootm.c Can't get kernel subimage data/size
108 common/cmd_bootm.c Got kernel subimage data/size
-108 common/cmd_bootm.c Wrong image type (not legacy, FIT)
-109 common/cmd_bootm.c Can't get kernel subimage type
-110 common/cmd_bootm.c Can't get kernel subimage comp
-111 common/cmd_bootm.c Can't get kernel subimage os
-112 common/cmd_bootm.c Can't get kernel subimage load address
-113 common/cmd_bootm.c Image uncompress/copy overwrite error
120 common/image.c Start initial ramdisk verification
-120 common/image.c Ramdisk FIT image has incorrect format
121 common/image.c Ramdisk FIT image has correct format
122 common/image.c No ramdisk subimage unit name, using configuration
-122 common/image.c Can't get configuration for ramdisk subimage
123 common/image.c Ramdisk unit name specified
-124 common/image.c Can't get ramdisk subimage node offset
125 common/image.c Got ramdisk subimage node offset
-125 common/image.c Ramdisk subimage hash verification failed
126 common/image.c Ramdisk subimage hash verification OK
-126 common/image.c Ramdisk subimage for unsupported architecture
127 common/image.c Architecture check OK
-127 common/image.c Can't get ramdisk subimage data/size
128 common/image.c Got ramdisk subimage data/size
129 common/image.c Can't get ramdisk load address
-129 common/image.c Got ramdisk load address
-130 common/cmd_doc.c Incorrect FIT image format
131 common/cmd_doc.c FIT image format OK
-140 common/cmd_ide.c Incorrect FIT image format
141 common/cmd_ide.c FIT image format OK
-150 common/cmd_nand.c Incorrect FIT image format
151 common/cmd_nand.c FIT image format OK
endmenu
menu "Boot media"
config NOR_BOOT
bool "Support for booting from NOR flash"
depends on NOR
help
Enabling this will make a U-Boot binary that is capable of being
booted via NOR. In this case we will enable certain pinmux early
as the ROM only partially sets up pinmux. We also default to using
NOR for environment.
config NAND_BOOT
bool "Support for booting from NAND flash"
default n
imply MTD_RAW_NAND
help
Enabling this will make a U-Boot binary that is capable of being
booted via NAND flash. This is not a must, some SoCs need this,
some not.
config ONENAND_BOOT
bool "Support for booting from ONENAND"
default n
imply MTD_RAW_NAND
help
Enabling this will make a U-Boot binary that is capable of being
booted via ONENAND. This is not a must, some SoCs need this,
some not.
config QSPI_BOOT
bool "Support for booting from QSPI flash"
default n
help
Enabling this will make a U-Boot binary that is capable of being
booted via QSPI flash. This is not a must, some SoCs need this,
some not.
config SATA_BOOT
bool "Support for booting from SATA"
default n
help
Enabling this will make a U-Boot binary that is capable of being
booted via SATA. This is not a must, some SoCs need this,
some not.
config SD_BOOT
bool "Support for booting from SD/EMMC"
default n
help
Enabling this will make a U-Boot binary that is capable of being
booted via SD/EMMC. This is not a must, some SoCs need this,
some not.
config SPI_BOOT
bool "Support for booting from SPI flash"
default n
help
Enabling this will make a U-Boot binary that is capable of being
booted via SPI flash. This is not a must, some SoCs need this,
some not.
endmenu
config BOOTDELAY
int "delay in seconds before automatically booting"
default 2
depends on AUTOBOOT
help
Delay before automatically running bootcmd;
set to 0 to autoboot with no delay, but you can stop it by key input.
set to -1 to disable autoboot.
set to -2 to autoboot with no delay and not check for abort
If this value is >= 0 then it is also used for the default delay
before starting the default entry in bootmenu. If it is < 0 then
a default value of 10s is used.
See doc/README.autoboot for details.
config USE_BOOTARGS
bool "Enable boot arguments"
help
Provide boot arguments to bootm command. Boot arguments are specified
in CONFIG_BOOTARGS option. Enable this option to be able to specify
CONFIG_BOOTARGS string. If this option is disabled, CONFIG_BOOTARGS
will be undefined and won't take any space in U-Boot image.
config BOOTARGS
string "Boot arguments"
depends on USE_BOOTARGS && !USE_DEFAULT_ENV_FILE
help
This can be used to pass arguments to the bootm command. The value of
CONFIG_BOOTARGS goes into the environment value "bootargs". Note that
this value will also override the "chosen" node in FDT blob.
config USE_BOOTCOMMAND
bool "Enable a default value for bootcmd"
help
Provide a default value for the bootcmd entry in the environment. If
autoboot is enabled this is what will be run automatically. Enable
this option to be able to specify CONFIG_BOOTCOMMAND as a string. If
this option is disabled, CONFIG_BOOTCOMMAND will be undefined and
won't take any space in U-Boot image.
config BOOTCOMMAND
string "bootcmd value"
depends on USE_BOOTCOMMAND && !USE_DEFAULT_ENV_FILE
default "run distro_bootcmd" if DISTRO_DEFAULTS
help
This is the string of commands that will be used as bootcmd and if
AUTOBOOT is set, automatically run.
config USE_PREBOOT
bool "Enable preboot"
help
When this option is enabled, the existence of the environment
variable "preboot" will be checked immediately before starting the
CONFIG_BOOTDELAY countdown and/or running the auto-boot command resp.
entering interactive mode.
This feature is especially useful when "preboot" is automatically
generated or modified. For example, the boot code can modify the
"preboot" when a user holds down a certain combination of keys.
config PREBOOT
string "preboot default value"
depends on USE_PREBOOT && !USE_DEFAULT_ENV_FILE
default "usb start" if USB_KEYBOARD || USB_STORAGE
default ""
help
This is the default of "preboot" environment variable.
menu "Console"
config MENU
bool
help
This is the library functionality to provide a text-based menu of
choices for the user to make choices with.
config CONSOLE_RECORD
bool "Console recording"
help
This provides a way to record console output (and provide console
input) through circular buffers. This is mostly useful for testing.
Console output is recorded even when the console is silent.
To enable console recording, call console_record_reset_enable()
from your code.
config CONSOLE_RECORD_OUT_SIZE
hex "Output buffer size"
depends on CONSOLE_RECORD
default 0x400 if CONSOLE_RECORD
help
Set the size of the console output buffer. When this fills up, no
more data will be recorded until some is removed. The buffer is
allocated immediately after the malloc() region is ready.
config CONSOLE_RECORD_IN_SIZE
hex "Input buffer size"
depends on CONSOLE_RECORD
default 0x100 if CONSOLE_RECORD
help
Set the size of the console input buffer. When this contains data,
tstc() and getc() will use this in preference to real device input.
The buffer is allocated immediately after the malloc() region is
ready.
config DISABLE_CONSOLE
bool "Add functionality to disable console completely"
help
Disable console (in & out).
config IDENT_STRING
string "Board specific string to be added to uboot version string"
help
This options adds the board specific name to u-boot version.
config LOGLEVEL
int "loglevel"
default 4
range 0 10
help
All Messages with a loglevel smaller than the console loglevel will
be compiled in. The loglevels are defined as follows:
0 - emergency
1 - alert
2 - critical
3 - error
4 - warning
5 - note
6 - info
7 - debug
8 - debug content
9 - debug hardware I/O
config SPL_LOGLEVEL
int
default LOGLEVEL
config TPL_LOGLEVEL
int
default LOGLEVEL
config SILENT_CONSOLE
bool "Support a silent console"
help
This option allows the console to be silenced, meaning that no
output will appear on the console devices. This is controlled by
setting the environment variable 'silent' to a non-empty value.
Note this also silences the console when booting Linux.
When the console is set up, the variable is checked, and the
GD_FLG_SILENT flag is set. Changing the environment variable later
will update the flag.
config SILENT_U_BOOT_ONLY
bool "Only silence the U-Boot console"
depends on SILENT_CONSOLE
help
Normally when the U-Boot console is silenced, Linux's console is
also silenced (assuming the board boots into Linux). This option
allows the linux console to operate normally, even if U-Boot's
is silenced.
config SILENT_CONSOLE_UPDATE_ON_SET
bool "Changes to the 'silent' environment variable update immediately"
depends on SILENT_CONSOLE
default y if SILENT_CONSOLE
help
When the 'silent' environment variable is changed, update the
console silence flag immediately. This allows 'setenv' to be used
to silence or un-silence the console.
The effect is that any change to the variable will affect the
GD_FLG_SILENT flag.
config SILENT_CONSOLE_UPDATE_ON_RELOC
bool "Allow flags to take effect on relocation"
depends on SILENT_CONSOLE
help
In some cases the environment is not available until relocation
(e.g. NAND). This option makes the value of the 'silent'
environment variable take effect at relocation.
config PRE_CONSOLE_BUFFER
bool "Buffer characters before the console is available"
help
Prior to the console being initialised (i.e. serial UART
initialised etc) all console output is silently discarded.
Defining CONFIG_PRE_CONSOLE_BUFFER will cause U-Boot to
buffer any console messages prior to the console being
initialised to a buffer. The buffer is a circular buffer, so
if it overflows, earlier output is discarded.
Note that this is not currently supported in SPL. It would be
useful to be able to share the pre-console buffer with SPL.
config PRE_CON_BUF_SZ
int "Sets the size of the pre-console buffer"
depends on PRE_CONSOLE_BUFFER
default 4096
help
The size of the pre-console buffer affects how much console output
can be held before it overflows and starts discarding earlier
output. Normally there is very little output at this early stage,
unless debugging is enabled, so allow enough for ~10 lines of
text.
This is a useful feature if you are using a video console and
want to see the full boot output on the console. Without this
option only the post-relocation output will be displayed.
config PRE_CON_BUF_ADDR
hex "Address of the pre-console buffer"
depends on PRE_CONSOLE_BUFFER
default 0x2f000000 if ARCH_SUNXI && MACH_SUN9I
default 0x4f000000 if ARCH_SUNXI && !MACH_SUN9I
default 0x0f000000 if ROCKCHIP_RK3288
default 0x0f200000 if ROCKCHIP_RK3399
help
This sets the start address of the pre-console buffer. This must
be in available memory and is accessed before relocation and
possibly before DRAM is set up. Therefore choose an address
carefully.
We should consider removing this option and allocating the memory
in board_init_f_init_reserve() instead.
config CONSOLE_MUX
bool "Enable console multiplexing"
default y if DM_VIDEO || VIDEO || LCD
help
This allows multiple devices to be used for each console 'file'.
For example, stdout can be set to go to serial and video.
Similarly, stdin can be set to come from serial and keyboard.
Input can be provided from either source. Console multiplexing
adds a small amount of size to U-Boot. Changes to the environment
variables stdout, stdin and stderr will take effect immediately.
config SYS_CONSOLE_IS_IN_ENV
bool "Select console devices from the environment"
default y if CONSOLE_MUX
help
This allows multiple input/output devices to be set at boot time.
For example, if stdout is set to "serial,video" then output will
be sent to both the serial and video devices on boot. The
environment variables can be updated after boot to change the
input/output devices.
config SYS_CONSOLE_OVERWRITE_ROUTINE
bool "Allow board control over console overwriting"
help
If this is enabled, and the board-specific function
overwrite_console() returns 1, the stdin, stderr and stdout are
switched to the serial port, else the settings in the environment
are used. If this is not enabled, the console will not be switched
to serial.
config SYS_CONSOLE_ENV_OVERWRITE
bool "Update environment variables during console init"
help
The console environment variables (stdout, stdin, stderr) can be
used to determine the correct console devices on start-up. This
option writes the console devices to these variables on console
start-up (after relocation). This causes the environment to be
updated to match the console devices actually chosen.
config SYS_CONSOLE_INFO_QUIET
bool "Don't display the console devices on boot"
help
Normally U-Boot displays the current settings for stdout, stdin
and stderr on boot when the post-relocation console is set up.
Enable this option to suppress this output. It can be obtained by
calling stdio_print_current_devices() from board code.
config SYS_STDIO_DEREGISTER
bool "Allow deregistering stdio devices"
default y if USB_KEYBOARD
help
Generally there is no need to deregister stdio devices since they
are never deactivated. But if a stdio device is used which can be
removed (for example a USB keyboard) then this option can be
enabled to ensure this is handled correctly.
config SPL_SYS_STDIO_DEREGISTER
bool "Allow deregistering stdio devices in SPL"
help
Generally there is no need to deregister stdio devices since they
are never deactivated. But if a stdio device is used which can be
removed (for example a USB keyboard) then this option can be
enabled to ensure this is handled correctly. This is very rarely
needed in SPL.
config SYS_DEVICE_NULLDEV
bool "Enable a null device for stdio"
default y if SPLASH_SCREEN || SYS_STDIO_DEREGISTER
help
Enable creation of a "nulldev" stdio device. This allows silent
operation of the console by setting stdout to "nulldev". Enable
this to use a serial console under board control.
endmenu
menu "Logging"
config LOG
bool "Enable logging support"
depends on DM
help
This enables support for logging of status and debug messages. These
can be displayed on the console, recorded in a memory buffer, or
discarded if not needed. Logging supports various categories and
levels of severity.
if LOG
config LOG_MAX_LEVEL
int "Maximum log level to record"
default 6
range 0 9
help
This selects the maximum log level that will be recorded. Any value
higher than this will be ignored. If possible log statements below
this level will be discarded at build time. Levels:
0 - emergency
1 - alert
2 - critical
3 - error
4 - warning
5 - note
6 - info
7 - debug
8 - debug content
9 - debug hardware I/O
config LOG_DEFAULT_LEVEL
int "Default logging level to display"
default LOG_MAX_LEVEL
range 0 LOG_MAX_LEVEL
help
This is the default logging level set when U-Boot starts. It can
be adjusted later using the 'log level' command. Note that setting
this to a value above LOG_MAX_LEVEL will be ineffective, since the
higher levels are not compiled in to U-Boot.
0 - emergency
1 - alert
2 - critical
3 - error
4 - warning
5 - note
6 - info
7 - debug
8 - debug content
9 - debug hardware I/O
config LOG_CONSOLE
bool "Allow log output to the console"
default y
help
Enables a log driver which writes log records to the console.
Generally the console is the serial port or LCD display. Only the
log message is shown - other details like level, category, file and
line number are omitted.
config LOGF_FILE
bool "Show source file name in log messages by default"
help
Show the source file name in log messages by default. This value
can be overridden using the 'log format' command.
config LOGF_LINE
bool "Show source line number in log messages by default"
help
Show the source line number in log messages by default. This value
can be overridden using the 'log format' command.
config LOGF_FUNC
bool "Show function name in log messages by default"
help
Show the function name in log messages by default. This value can
be overridden using the 'log format' command.
config LOG_SYSLOG
bool "Log output to syslog server"
depends on NET
help
Enables a log driver which broadcasts log records via UDP port 514
to syslog servers.
config SPL_LOG
bool "Enable logging support in SPL"
depends on LOG
help
This enables support for logging of status and debug messages. These
can be displayed on the console, recorded in a memory buffer, or
discarded if not needed. Logging supports various categories and
levels of severity.
if SPL_LOG
config SPL_LOG_MAX_LEVEL
int "Maximum log level to record in SPL"
depends on SPL_LOG
default 3
range 0 9
help
This selects the maximum log level that will be recorded. Any value
higher than this will be ignored. If possible log statements below
this level will be discarded at build time. Levels:
0 - emergency
1 - alert
2 - critical
3 - error
4 - warning
5 - note
6 - info
7 - debug
8 - debug content
9 - debug hardware I/O
config SPL_LOG_CONSOLE
bool "Allow log output to the console in SPL"
default y
help
Enables a log driver which writes log records to the console.
Generally the console is the serial port or LCD display. Only the
log message is shown - other details like level, category, file and
line number are omitted.
endif
config TPL_LOG
bool "Enable logging support in TPL"
depends on LOG
help
This enables support for logging of status and debug messages. These
can be displayed on the console, recorded in a memory buffer, or
discarded if not needed. Logging supports various categories and
levels of severity.
if TPL_LOG
config TPL_LOG_MAX_LEVEL
int "Maximum log level to record in TPL"
depends on TPL_LOG
default 3
range 0 9
help
This selects the maximum log level that will be recorded. Any value
higher than this will be ignored. If possible log statements below
this level will be discarded at build time. Levels:
0 - emergency
1 - alert
2 - critical
3 - error
4 - warning
5 - note
6 - info
7 - debug
8 - debug content
9 - debug hardware I/O
config TPL_LOG_CONSOLE
bool "Allow log output to the console in TPL"
default y
help
Enables a log driver which writes log records to the console.
Generally the console is the serial port or LCD display. Only the
log message is shown - other details like level, category, file and
line number are omitted.
endif
config LOG_ERROR_RETURN
bool "Log all functions which return an error"
help
When an error is returned in U-Boot it is sometimes difficult to
figure out the root cause. For example, reading from SPI flash may
fail due to a problem in the SPI controller or due to the flash part
not returning the expected information. This option changes
log_ret() to log any errors it sees. With this option disabled,
log_ret() is a nop.
You can add log_ret() to all functions which return an error code.
config LOG_TEST
bool "Provide a test for logging"
depends on UNIT_TEST
default y if SANDBOX
help
This enables a 'log test' command to test logging. It is normally
executed from a pytest and simply outputs logging information
in various different ways to test that the logging system works
correctly with various settings.
endif
endmenu
config SUPPORT_RAW_INITRD
bool "Enable raw initrd images"
help
Note, defining the SUPPORT_RAW_INITRD allows user to supply
kernel with raw initrd images. The syntax is slightly different, the
address of the initrd must be augmented by it's size, in the following
format: "<initrd address>:<initrd size>".
config DEFAULT_FDT_FILE
string "Default fdt file"
help
This option is used to set the default fdt file to boot OS.
config MISC_INIT_R
bool "Execute Misc Init"
default y if ARCH_KEYSTONE || ARCH_SUNXI || MPC85xx
default y if ARCH_OMAP2PLUS && !AM33XX
help
Enabling this option calls 'misc_init_r' function
config VERSION_VARIABLE
bool "add U-Boot environment variable vers"
default n
help
If this variable is defined, an environment variable
named "ver" is created by U-Boot showing the U-Boot
version as printed by the "version" command.
Any change to this variable will be reverted at the
next reset.
config BOARD_LATE_INIT
bool "Execute Board late init"
help
Sometimes board require some initialization code that might
require once the actual init done, example saving board specific env,
boot-modes etc. which eventually done at late.
So this config enable the late init code with the help of board_late_init
function which should defined on respective boards.
config DISPLAY_CPUINFO
bool "Display information about the CPU during start up"
default y if ARC|| ARM || NIOS2 || X86 || XTENSA || M68K
help
Display information about the CPU that U-Boot is running on
when U-Boot starts up. The function print_cpuinfo() is called
to do this.
config DISPLAY_BOARDINFO
bool "Display information about the board during early start up"
default y if ARC || ARM || M68K || MIPS || PPC || SANDBOX || XTENSA
help
Display information about the board that U-Boot is running on
when U-Boot starts up. The board function checkboard() is called
to do this.
config DISPLAY_BOARDINFO_LATE
bool "Display information about the board during late start up"
help
Display information about the board that U-Boot is running on after
the relocation phase. The board function checkboard() is called to do
this.
config BOUNCE_BUFFER
bool "Include bounce buffer API"
help
Some peripherals support DMA from a subset of physically
addressable memory only. To support such peripherals, the
bounce buffer API uses a temporary buffer: it copies data
to/from DMA regions while managing cache operations.
A second possible use of bounce buffers is their ability to
provide aligned buffers for DMA operations.
config BOARD_TYPES
bool "Call get_board_type() to get and display the board type"
help
If this option is enabled, checkboard() will call get_board_type()
to get a string containing the board type and this will be
displayed immediately after the model is shown on the console
early in boot.
menu "Start-up hooks"
config ARCH_EARLY_INIT_R
bool "Call arch-specific init soon after relocation"
help
With this option U-Boot will call arch_early_init_r() soon after
relocation. Driver model is running by this point, and the cache
is on. Note that board_early_init_r() is called first, if
enabled. This can be used to set up architecture-specific devices.
config ARCH_MISC_INIT
bool "Call arch-specific init after relocation, when console is ready"
help
With this option U-Boot will call arch_misc_init() after
relocation to allow miscellaneous arch-dependent initialisation
to be performed. This function should be defined by the board
and will be called after the console is set up, after relocation.
config BOARD_EARLY_INIT_F
bool "Call board-specific init before relocation"
help
Some boards need to perform initialisation as soon as possible
after boot. With this option, U-Boot calls board_early_init_f()
after driver model is ready in the pre-relocation init sequence.
Note that the normal serial console is not yet set up, but the
debug UART will be available if enabled.
config BOARD_EARLY_INIT_R
bool "Call board-specific init after relocation"
help
Some boards need to perform initialisation as directly after
relocation. With this option, U-Boot calls board_early_init_r()
in the post-relocation init sequence.
config LAST_STAGE_INIT
bool "Call board-specific as last setup step"
help
Some boards need to perform initialisation immediately before control
is passed to the command-line interpreter (e.g. for initializations
that depend on later phases in the init sequence). With this option,
U-Boot calls last_stage_init() before the command-line interpreter is
started.
config PCI_INIT_R
bool "Enumerate PCI buses during init"
depends on PCI
default y if !DM_PCI
help
With this option U-Boot will call pci_init() soon after relocation,
which will enumerate PCI buses. This is needed, for instance, in the
case of DM PCI-based Ethernet devices, which will not be detected
without having the enumeration performed earlier.
endmenu
menu "Security support"
config HASH
bool # "Support hashing API (SHA1, SHA256, etc.)"
help
This provides a way to hash data in memory using various supported
algorithms (such as SHA1, MD5, CRC32). The API is defined in hash.h
and the algorithms it supports are defined in common/hash.c. See
also CMD_HASH for command-line access.
config AVB_VERIFY
bool "Build Android Verified Boot operations"
depends on LIBAVB
depends on PARTITION_UUIDS
help
This option enables compilation of bootloader-dependent operations,
used by Android Verified Boot 2.0 library (libavb). Includes:
* Helpers to process strings in order to build OS bootargs.
* Helpers to access MMC, similar to drivers/fastboot/fb_mmc.c.
* Helpers to alloc/init/free avb ops.
if AVB_VERIFY
config AVB_BUF_ADDR
hex "Define AVB buffer address"
default FASTBOOT_BUF_ADDR
help
AVB requires a buffer for memory transactions. This variable defines the
buffer address.
config AVB_BUF_SIZE
hex "Define AVB buffer SIZE"
default FASTBOOT_BUF_SIZE
help
AVB requires a buffer for memory transactions. This variable defines the
buffer size.
endif # AVB_VERIFY
config SPL_HASH
bool # "Support hashing API (SHA1, SHA256, etc.)"
help
This provides a way to hash data in memory using various supported
algorithms (such as SHA1, MD5, CRC32). The API is defined in hash.h
and the algorithms it supports are defined in common/hash.c. See
also CMD_HASH for command-line access.
config TPL_HASH
bool # "Support hashing API (SHA1, SHA256, etc.)"
help
This provides a way to hash data in memory using various supported
algorithms (such as SHA1, MD5, CRC32). The API is defined in hash.h
and the algorithms it supports are defined in common/hash.c. See
also CMD_HASH for command-line access.
endmenu
menu "Update support"
config UPDATE_TFTP
bool "Auto-update using fitImage via TFTP"
depends on FIT
help
This option allows performing update of NOR with data in fitImage
sent via TFTP boot.
config UPDATE_TFTP_CNT_MAX
int "The number of connection retries during auto-update"
default 0
depends on UPDATE_TFTP
config UPDATE_TFTP_MSEC_MAX
int "Delay in mSec to wait for the TFTP server during auto-update"
default 100
depends on UPDATE_TFTP
config ANDROID_AB
bool "Android A/B updates"
default n
help
If enabled, adds support for the new Android A/B update model. This
allows the bootloader to select which slot to boot from based on the
information provided by userspace via the Android boot_ctrl HAL. This
allows a bootloader to try a new version of the system but roll back
to previous version if the new one didn't boot all the way.
endmenu
menu "Blob list"
config BLOBLIST
bool "Support for a bloblist"
help
This enables support for a bloblist in U-Boot, which can be passed
from TPL to SPL to U-Boot proper (and potentially to Linux). The
blob list supports multiple binary blobs of data, each with a tag,
so that different U-Boot components can store data which can survive
through to the next stage of the boot.
config SPL_BLOBLIST
bool "Support for a bloblist in SPL"
depends on BLOBLIST
default y if SPL
help
This enables a bloblist in SPL. If this is the first part of U-Boot
to run, then the bloblist is set up in SPL and passed to U-Boot
proper. If TPL also has a bloblist, then SPL uses the one from there.
config TPL_BLOBLIST
bool "Support for a bloblist in TPL"
depends on BLOBLIST
default y if TPL
help
This enables a bloblist in TPL. The bloblist is set up in TPL and
passed to SPL and U-Boot proper.
config BLOBLIST_SIZE
hex "Size of bloblist"
depends on BLOBLIST
default 0x400
help
Sets the size of the bloblist in bytes. This must include all
overhead (alignment, bloblist header, record header). The bloblist
is set up in the first part of U-Boot to run (TPL, SPL or U-Boot
proper), and this sane bloblist is used for subsequent stages.
config BLOBLIST_ADDR
hex "Address of bloblist"
depends on BLOBLIST
default 0xe000 if SANDBOX
help
Sets the address of the bloblist, set up by the first part of U-Boot
which runs. Subsequent U-Boot stages typically use the same address.
endmenu
source "common/spl/Kconfig"
config IMAGE_SIGN_INFO
bool
select SHA1
select SHA256
help
Enable image_sign_info helper functions.
if IMAGE_SIGN_INFO
config SPL_IMAGE_SIGN_INFO
bool
select SHA1
select SHA256
help
Enable image_sign_info helper functions in SPL.
endif
Reference in a new issue View git blame Copy permalink