u-boot/drivers/serial/serial_npcm.c
Jim Liu 6f6a0b74d6 serial: npcm: Add support for Nuvoton NPCM SoCs
Add Nuvoton BMC NPCM7xx/NPCM8xx uart driver

Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
Signed-off-by: Stanley Chu <yschu@nuvoton.com>
2022-05-05 09:28:47 -04:00

157 lines
3.7 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (c) 2021 Nuvoton Technology Corp.
*/
#include <common.h>
#include <clk.h>
#include <dm.h>
#include <serial.h>
struct npcm_uart {
union {
u32 rbr; /* Receive Buffer Register */
u32 thr; /* Transmit Holding Register */
u32 dll; /* Divisor Latch (Low Byte) Register */
};
union {
u32 ier; /* Interrupt Enable Register */
u32 dlm; /* Divisor Latch (Low Byte) Register */
};
union {
u32 iir; /* Interrupt Identification Register */
u32 fcr; /* FIFO Control Register */
};
u32 lcr; /* Line Control Register */
u32 mcr; /* Modem Control Register */
u32 lsr; /* Line Status Control Register */
u32 msr; /* Modem Status Register */
u32 tor; /* Timeout Register */
};
#define LCR_WLS_8BITS 3 /* 8-bit word length select */
#define FCR_TFR BIT(2) /* TxFIFO reset */
#define FCR_RFR BIT(1) /* RxFIFO reset */
#define FCR_FME BIT(0) /* FIFO mode enable */
#define LSR_THRE BIT(5) /* Status of TxFIFO empty */
#define LSR_RFDR BIT(0) /* Status of RxFIFO data ready */
#define LCR_DLAB BIT(7) /* Divisor latch access bit */
struct npcm_serial_plat {
struct npcm_uart *reg;
u32 uart_clk; /* frequency of uart clock source */
};
static int npcm_serial_pending(struct udevice *dev, bool input)
{
struct npcm_serial_plat *plat = dev_get_plat(dev);
struct npcm_uart *uart = plat->reg;
if (input)
return readb(&uart->lsr) & LSR_RFDR ? 1 : 0;
else
return readb(&uart->lsr) & LSR_THRE ? 0 : 1;
}
static int npcm_serial_putc(struct udevice *dev, const char ch)
{
struct npcm_serial_plat *plat = dev_get_plat(dev);
struct npcm_uart *uart = plat->reg;
if (!(readb(&uart->lsr) & LSR_THRE))
return -EAGAIN;
writeb(ch, &uart->thr);
return 0;
}
static int npcm_serial_getc(struct udevice *dev)
{
struct npcm_serial_plat *plat = dev_get_plat(dev);
struct npcm_uart *uart = plat->reg;
if (!(readb(&uart->lsr) & LSR_RFDR))
return -EAGAIN;
return readb(&uart->rbr);
}
static int npcm_serial_setbrg(struct udevice *dev, int baudrate)
{
struct npcm_serial_plat *plat = dev_get_plat(dev);
struct npcm_uart *uart = plat->reg;
u16 divisor;
/* BaudOut = UART Clock / (16 * [Divisor + 2]) */
divisor = DIV_ROUND_CLOSEST(plat->uart_clk, 16 * baudrate + 2) - 2;
setbits_8(&uart->lcr, LCR_DLAB);
writeb(divisor & 0xff, &uart->dll);
writeb(divisor >> 8, &uart->dlm);
clrbits_8(&uart->lcr, LCR_DLAB);
return 0;
}
static int npcm_serial_probe(struct udevice *dev)
{
struct npcm_serial_plat *plat = dev_get_plat(dev);
struct npcm_uart *uart = plat->reg;
struct clk clk, parent;
u32 freq;
int ret;
plat->reg = dev_read_addr_ptr(dev);
freq = dev_read_u32_default(dev, "clock-frequency", 0);
ret = clk_get_by_index(dev, 0, &clk);
if (ret < 0)
return ret;
ret = clk_get_by_index(dev, 1, &parent);
if (!ret) {
ret = clk_set_parent(&clk, &parent);
if (ret)
return ret;
}
ret = clk_set_rate(&clk, freq);
if (ret < 0)
return ret;
plat->uart_clk = ret;
/* Disable all interrupt */
writeb(0, &uart->ier);
/* Set 8 bit, 1 stop, no parity */
writeb(LCR_WLS_8BITS, &uart->lcr);
/* Reset RX/TX FIFO */
writeb(FCR_FME | FCR_RFR | FCR_TFR, &uart->fcr);
return 0;
}
static const struct dm_serial_ops npcm_serial_ops = {
.getc = npcm_serial_getc,
.setbrg = npcm_serial_setbrg,
.putc = npcm_serial_putc,
.pending = npcm_serial_pending,
};
static const struct udevice_id npcm_serial_ids[] = {
{ .compatible = "nuvoton,npcm750-uart" },
{ .compatible = "nuvoton,npcm845-uart" },
{ }
};
U_BOOT_DRIVER(serial_npcm) = {
.name = "serial_npcm",
.id = UCLASS_SERIAL,
.of_match = npcm_serial_ids,
.plat_auto = sizeof(struct npcm_serial_plat),
.probe = npcm_serial_probe,
.ops = &npcm_serial_ops,
.flags = DM_FLAG_PRE_RELOC,
};