mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-12 16:07:30 +00:00
194dd74ad9
Patch adds modification to shared omap5 abb_setup() function, and proper registers definitions needed for ABB setup sequence. ABB is initialized for MPU voltage domain at OPP_NOM. Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Tom Rini <trini@ti.com>
57 lines
1.4 KiB
C
57 lines
1.4 KiB
C
/*
|
|
* Adaptive Body Bias programming sequence for OMAP5 family
|
|
*
|
|
* (C) Copyright 2013
|
|
* Texas Instruments, <www.ti.com>
|
|
*
|
|
* Andrii Tseglytskyi <andrii.tseglytskyi@ti.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/omap_common.h>
|
|
#include <asm/io.h>
|
|
|
|
/*
|
|
* Setup LDOVBB for OMAP5.
|
|
* On OMAP5+ some ABB settings are fused. They are handled
|
|
* in the following way:
|
|
*
|
|
* 1. corresponding EFUSE register contains ABB enable bit
|
|
* and VSET value
|
|
* 2. If ABB enable bit is set to 1, than ABB should be
|
|
* enabled, otherwise ABB should be disabled
|
|
* 3. If ABB is enabled, than VSET value should be copied
|
|
* to corresponding MUX control register
|
|
*/
|
|
s8 abb_setup_ldovbb(u32 fuse, u32 ldovbb)
|
|
{
|
|
u32 vset;
|
|
u32 fuse_enable_mask = OMAP5_ABB_FUSE_ENABLE_MASK;
|
|
u32 fuse_vset_mask = OMAP5_ABB_FUSE_VSET_MASK;
|
|
|
|
if (!is_omap54xx()) {
|
|
/* DRA7 */
|
|
fuse_enable_mask = DRA7_ABB_FUSE_ENABLE_MASK;
|
|
fuse_vset_mask = DRA7_ABB_FUSE_VSET_MASK;
|
|
}
|
|
/*
|
|
* ABB parameters must be properly fused
|
|
* otherwise ABB should be disabled
|
|
*/
|
|
vset = readl(fuse);
|
|
if (!(vset & fuse_enable_mask))
|
|
return -1;
|
|
|
|
/* prepare VSET value for LDOVBB mux register */
|
|
vset &= fuse_vset_mask;
|
|
vset >>= ffs(fuse_vset_mask) - 1;
|
|
vset <<= ffs(OMAP5_ABB_LDOVBBMPU_VSET_OUT_MASK) - 1;
|
|
vset |= OMAP5_ABB_LDOVBBMPU_MUX_CTRL_MASK;
|
|
|
|
/* setup LDOVBB using fused value */
|
|
clrsetbits_le32(ldovbb, OMAP5_ABB_LDOVBBMPU_VSET_OUT_MASK, vset);
|
|
|
|
return 0;
|
|
}
|