mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-14 15:23:07 +00:00
f0f86d39fe
FRU data is not displayed properly in case of 0xc1 fields. The 0xC1 can be used in two cases. 1. Char record type 8-bit ASCII + Latin 1 with length of 1. (For example board revision 'A') 2. C1h (type/length byte encoded to indicate no more info fields). which can follow by 00h to fill all remaining unused space Hence removed the check end-of-the field c1 to allow c1 fields. "ASCII+LATIN1" is defined as the printable characters from the first set of 256 characters of Unicode 6.2 (U+0000h through U+00FFh, inclusive) expressed as an eight-bit value. (Unicode follows ISO/IEC 8859-1 in the layout of printable characters up to U+00FFh). So, print only printable chars and limit range from 0x20 ' ' to 0x7e '-' which will be also indication if 0xc1 behaves as record with one char or end of record. Signed-off-by: Algapally Santosh Sagar <santoshsagar.algapally@amd.com> Signed-off-by: Michal Simek <michal.simek@amd.com> Link: https://lore.kernel.org/r/4198d73de600627872c80a5b07e5068502c589d7.1674648379.git.michal.simek@amd.com
432 lines
10 KiB
C
432 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* (C) Copyright 2019 - 2022, Xilinx, Inc.
|
|
* (C) Copyright 2022 - 2023, Advanced Micro Devices, Inc.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <cpu_func.h>
|
|
#include <env.h>
|
|
#include <fdtdec.h>
|
|
#include <log.h>
|
|
#include <malloc.h>
|
|
#include <net.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/hardware.h>
|
|
|
|
#include "fru.h"
|
|
|
|
struct fru_table fru_data __section(".data");
|
|
|
|
static u16 fru_cal_area_len(u8 len)
|
|
{
|
|
return len * FRU_COMMON_HDR_LEN_MULTIPLIER;
|
|
}
|
|
|
|
static u8 fru_version(u8 ver)
|
|
{
|
|
return ver & FRU_COMMON_HDR_VER_MASK;
|
|
}
|
|
|
|
static int fru_check_language(u8 code)
|
|
{
|
|
if (code != FRU_LANG_CODE_ENGLISH && code != FRU_LANG_CODE_ENGLISH_1) {
|
|
printf("FRU_ERROR: Only English Language is supported\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
u8 fru_checksum(u8 *addr, u8 len)
|
|
{
|
|
u8 checksum = 0;
|
|
u8 cnt = len;
|
|
|
|
while (len--) {
|
|
if (*addr == 0)
|
|
cnt--;
|
|
|
|
checksum += *addr;
|
|
addr++;
|
|
}
|
|
|
|
/* If all data bytes are 0's return error */
|
|
if (!cnt)
|
|
return EINVAL;
|
|
|
|
return checksum;
|
|
}
|
|
|
|
static int fru_check_type_len(u8 type_len, u8 language, u8 *type)
|
|
{
|
|
int len;
|
|
|
|
*type = (type_len & FRU_TYPELEN_CODE_MASK) >> FRU_TYPELEN_TYPE_SHIFT;
|
|
|
|
len = type_len & FRU_TYPELEN_LEN_MASK;
|
|
|
|
return len;
|
|
}
|
|
|
|
/* Return len */
|
|
static u8 fru_gen_type_len(u8 *addr, char *name)
|
|
{
|
|
int len = strlen(name);
|
|
struct fru_board_info_member *member;
|
|
|
|
member = (struct fru_board_info_member *)addr;
|
|
member->type_len = FRU_TYPELEN_TYPE_ASCII8 << FRU_TYPELEN_TYPE_SHIFT;
|
|
member->type_len |= len;
|
|
|
|
debug("%lx/%lx: Add %s to 0x%lx (len 0x%x)\n", (ulong)addr,
|
|
(ulong)&member->type_len, name, (ulong)&member->name, len);
|
|
memcpy(&member->name, name, len);
|
|
|
|
/* Add +1 for type_len parameter */
|
|
return 1 + len;
|
|
}
|
|
|
|
int fru_generate(unsigned long addr, char *manufacturer, char *board_name,
|
|
char *serial_no, char *part_no, char *revision)
|
|
{
|
|
struct fru_common_hdr *header = (struct fru_common_hdr *)addr;
|
|
struct fru_board_info_header *board_info;
|
|
u8 *member;
|
|
u8 len, pad, modulo;
|
|
|
|
header->version = 1; /* Only version 1.0 is supported now */
|
|
header->off_internal = 0; /* not present */
|
|
header->off_chassis = 0; /* not present */
|
|
header->off_board = (sizeof(*header)) / 8; /* Starting offset 8 */
|
|
header->off_product = 0; /* not present */
|
|
header->off_multirec = 0; /* not present */
|
|
header->pad = 0;
|
|
/*
|
|
* This unsigned byte can be used to calculate a zero checksum
|
|
* for the data area following the header. I.e. the modulo 256 sum of
|
|
* the record data bytes plus the checksum byte equals zero.
|
|
*/
|
|
header->crc = 0; /* Clear before calculation */
|
|
header->crc = 0 - fru_checksum((u8 *)header, sizeof(*header));
|
|
|
|
/* board info is just right after header */
|
|
board_info = (void *)((u8 *)header + sizeof(*header));
|
|
|
|
debug("header %lx, board_info %lx\n", (ulong)header, (ulong)board_info);
|
|
|
|
board_info->ver = 1; /* 1.0 spec */
|
|
board_info->lang_code = 0; /* English */
|
|
board_info->time[0] = 0; /* unspecified */
|
|
board_info->time[1] = 0; /* unspecified */
|
|
board_info->time[2] = 0; /* unspecified */
|
|
|
|
/* Member fields are just after board_info header */
|
|
member = (u8 *)board_info + sizeof(*board_info);
|
|
|
|
len = fru_gen_type_len(member, manufacturer); /* Board Manufacturer */
|
|
member += len;
|
|
len = fru_gen_type_len(member, board_name); /* Board Product name */
|
|
member += len;
|
|
len = fru_gen_type_len(member, serial_no); /* Board Serial number */
|
|
member += len;
|
|
len = fru_gen_type_len(member, part_no); /* Board part number */
|
|
member += len;
|
|
len = fru_gen_type_len(member, "U-Boot generator"); /* File ID */
|
|
member += len;
|
|
len = fru_gen_type_len(member, revision); /* Revision */
|
|
member += len;
|
|
|
|
*member++ = 0xc1; /* Indication of no more fields */
|
|
|
|
len = member - (u8 *)board_info; /* Find current length */
|
|
len += 1; /* Add checksum there too for calculation */
|
|
|
|
modulo = len % 8;
|
|
|
|
if (modulo) {
|
|
/* Do not fill last item which is checksum */
|
|
for (pad = 0; pad < 8 - modulo; pad++)
|
|
*member++ = 0;
|
|
|
|
/* Increase structure size */
|
|
len += 8 - modulo;
|
|
}
|
|
|
|
board_info->len = len / 8; /* Size in multiples of 8 bytes */
|
|
|
|
*member = 0; /* Clear before calculation */
|
|
*member = 0 - fru_checksum((u8 *)board_info, len);
|
|
|
|
debug("checksum %x(addr %x)\n", *member, len);
|
|
|
|
env_set_hex("fru_addr", addr);
|
|
env_set_hex("filesize", (unsigned long)member - addr + 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fru_parse_board(unsigned long addr)
|
|
{
|
|
u8 i, type;
|
|
int len;
|
|
u8 *data, *term, *limit, *next_addr, *eof;
|
|
|
|
memcpy(&fru_data.brd.ver, (void *)addr, 6);
|
|
|
|
/*
|
|
* eof marks the last data byte (without checksum). That's why checksum
|
|
* is address length - 1 and last data byte is length - 2.
|
|
*/
|
|
eof = (u8 *)(fru_data.brd.len * 8 + addr - 2);
|
|
|
|
addr += 6;
|
|
data = (u8 *)&fru_data.brd.manufacturer_type_len;
|
|
|
|
/* Record max structure limit not to write data over allocated space */
|
|
limit = (u8 *)&fru_data.brd + sizeof(struct fru_board_data);
|
|
|
|
for (i = 0; ; i++, data += FRU_BOARD_MAX_LEN) {
|
|
len = fru_check_type_len(*(u8 *)addr, fru_data.brd.lang_code,
|
|
&type);
|
|
next_addr = (u8 *)addr + 1;
|
|
|
|
if ((u8 *)addr >= eof) {
|
|
debug("Reach EOF record: addr %lx, eof %lx\n", addr,
|
|
(unsigned long)eof);
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* Stop capture if the type is ASCII and valid field length
|
|
* is 1 (0xc1) and next FRU data is less than 0x20 (space " ")
|
|
* or it is 0x7f (delete 'DEL').
|
|
*/
|
|
if (type == FRU_TYPELEN_TYPE_ASCII8 && len == 1 &&
|
|
(*next_addr < 0x20 || *next_addr == 0x7F))
|
|
break;
|
|
|
|
/* Stop when amount of chars is more then fields to record */
|
|
if (data + len > limit)
|
|
break;
|
|
/* This record type/len field */
|
|
*data++ = *(u8 *)addr;
|
|
|
|
/* Add offset to match data */
|
|
addr += 1;
|
|
|
|
/* If len is 0 it means empty field that's why skip writing */
|
|
if (!len)
|
|
continue;
|
|
|
|
/* Record data field */
|
|
memcpy(data, (u8 *)addr, len);
|
|
term = data + (u8)len;
|
|
*term = 0;
|
|
addr += len;
|
|
}
|
|
|
|
if (i < FRU_BOARD_AREA_TOTAL_FIELDS) {
|
|
printf("Board area require minimum %d fields\n",
|
|
FRU_BOARD_AREA_TOTAL_FIELDS);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fru_parse_multirec(unsigned long addr)
|
|
{
|
|
struct fru_multirec_hdr mrc;
|
|
u8 checksum = 0;
|
|
u8 hdr_len = sizeof(struct fru_multirec_hdr);
|
|
int mac_len = 0;
|
|
|
|
debug("%s: multirec addr %lx\n", __func__, addr);
|
|
|
|
do {
|
|
memcpy(&mrc.rec_type, (void *)addr, hdr_len);
|
|
|
|
checksum = fru_checksum((u8 *)addr, hdr_len);
|
|
if (checksum) {
|
|
debug("%s header CRC error\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (mrc.rec_type == FRU_MULTIREC_TYPE_OEM) {
|
|
struct fru_multirec_mac *mac = (void *)addr + hdr_len;
|
|
u32 type = FRU_DUT_MACID;
|
|
|
|
if (CONFIG_IS_ENABLED(FRU_SC))
|
|
type = FRU_SC_MACID;
|
|
|
|
if (mac->ver == type) {
|
|
mac_len = mrc.len - FRU_MULTIREC_MAC_OFFSET;
|
|
memcpy(&fru_data.mac.macid, mac->macid, mac_len);
|
|
}
|
|
}
|
|
addr += mrc.len + hdr_len;
|
|
} while (!(mrc.type & FRU_LAST_REC));
|
|
|
|
return 0;
|
|
}
|
|
|
|
int fru_capture(unsigned long addr)
|
|
{
|
|
struct fru_common_hdr *hdr;
|
|
u8 checksum = 0;
|
|
unsigned long multirec_addr = addr;
|
|
|
|
checksum = fru_checksum((u8 *)addr, sizeof(struct fru_common_hdr));
|
|
if (checksum) {
|
|
printf("%s Common header CRC error\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
hdr = (struct fru_common_hdr *)addr;
|
|
memset((void *)&fru_data, 0, sizeof(fru_data));
|
|
memcpy((void *)&fru_data, (void *)hdr,
|
|
sizeof(struct fru_common_hdr));
|
|
|
|
fru_data.captured = true;
|
|
|
|
if (hdr->off_board) {
|
|
addr += fru_cal_area_len(hdr->off_board);
|
|
fru_parse_board(addr);
|
|
}
|
|
|
|
env_set_hex("fru_addr", addr);
|
|
|
|
if (hdr->off_multirec) {
|
|
multirec_addr += fru_cal_area_len(hdr->off_multirec);
|
|
fru_parse_multirec(multirec_addr);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int fru_display_board(struct fru_board_data *brd, int verbose)
|
|
{
|
|
u32 time = 0;
|
|
u8 type;
|
|
int len;
|
|
u8 *data;
|
|
static const char * const typecode[] = {
|
|
"Binary/Unspecified",
|
|
"BCD plus",
|
|
"6-bit ASCII",
|
|
"8-bit ASCII",
|
|
"2-byte UNICODE"
|
|
};
|
|
static const char * const boardinfo[] = {
|
|
"Manufacturer Name",
|
|
"Product Name",
|
|
"Serial No",
|
|
"Part Number",
|
|
"File ID",
|
|
/* Xilinx spec */
|
|
"Revision Number",
|
|
};
|
|
|
|
if (verbose) {
|
|
printf("*****BOARD INFO*****\n");
|
|
printf("Version:%d\n", fru_version(brd->ver));
|
|
printf("Board Area Length:%d\n", fru_cal_area_len(brd->len));
|
|
}
|
|
|
|
if (fru_check_language(brd->lang_code))
|
|
return -EINVAL;
|
|
|
|
time = brd->time[2] << 16 | brd->time[1] << 8 |
|
|
brd->time[0];
|
|
|
|
if (verbose)
|
|
printf("Time in Minutes from 0:00hrs 1/1/96: %d\n", time);
|
|
|
|
data = (u8 *)&brd->manufacturer_type_len;
|
|
|
|
for (u8 i = 0; i < (sizeof(boardinfo) / sizeof(*boardinfo)); i++) {
|
|
len = fru_check_type_len(*data++, brd->lang_code,
|
|
&type);
|
|
|
|
/* Empty record has no len/type filled */
|
|
if (!len) {
|
|
debug("%s not found\n", boardinfo[i]);
|
|
continue;
|
|
}
|
|
|
|
if (type <= FRU_TYPELEN_TYPE_ASCII8 &&
|
|
(brd->lang_code == FRU_LANG_CODE_ENGLISH ||
|
|
brd->lang_code == FRU_LANG_CODE_ENGLISH_1))
|
|
debug("Type code: %s\n", typecode[type]);
|
|
else
|
|
debug("Type code: %s\n", typecode[type + 1]);
|
|
|
|
switch (type) {
|
|
case FRU_TYPELEN_TYPE_BINARY:
|
|
debug("Length: %d\n", len);
|
|
printf(" %s: 0x%x\n", boardinfo[i], *data);
|
|
break;
|
|
case FRU_TYPELEN_TYPE_ASCII8:
|
|
debug("Length: %d\n", len);
|
|
printf(" %s: %s\n", boardinfo[i], data);
|
|
break;
|
|
default:
|
|
debug("Unsupported type %x\n", type);
|
|
}
|
|
|
|
data += FRU_BOARD_MAX_LEN;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void fru_display_common_hdr(struct fru_common_hdr *hdr, int verbose)
|
|
{
|
|
if (!verbose)
|
|
return;
|
|
|
|
printf("*****COMMON HEADER*****\n");
|
|
printf("Version:%d\n", fru_version(hdr->version));
|
|
if (hdr->off_internal)
|
|
printf("Internal Use Area Offset:%d\n",
|
|
fru_cal_area_len(hdr->off_internal));
|
|
else
|
|
printf("*** No Internal Area ***\n");
|
|
|
|
if (hdr->off_chassis)
|
|
printf("Chassis Info Area Offset:%d\n",
|
|
fru_cal_area_len(hdr->off_chassis));
|
|
else
|
|
printf("*** No Chassis Info Area ***\n");
|
|
|
|
if (hdr->off_board)
|
|
printf("Board Area Offset:%d\n",
|
|
fru_cal_area_len(hdr->off_board));
|
|
else
|
|
printf("*** No Board Area ***\n");
|
|
|
|
if (hdr->off_product)
|
|
printf("Product Info Area Offset:%d\n",
|
|
fru_cal_area_len(hdr->off_product));
|
|
else
|
|
printf("*** No Product Info Area ***\n");
|
|
|
|
if (hdr->off_multirec)
|
|
printf("MultiRecord Area Offset:%d\n",
|
|
fru_cal_area_len(hdr->off_multirec));
|
|
else
|
|
printf("*** No MultiRecord Area ***\n");
|
|
}
|
|
|
|
int fru_display(int verbose)
|
|
{
|
|
if (!fru_data.captured) {
|
|
printf("FRU data not available please run fru parse\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
fru_display_common_hdr(&fru_data.hdr, verbose);
|
|
|
|
return fru_display_board(&fru_data.brd, verbose);
|
|
}
|