mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-18 01:03:05 +00:00
bd6a247593
K3 GP devices allows booting the secure binaries on them by bypassing
the x509 header on them.
ATF and OPTEE firewalling required the rproc_load to be called before
authentication. This change caused the failure for GP devices that
strips off the headers. The boot vector had been set before the headers
were stripped off causing the runtime stripping to fail and stripping
becoming in-effective.
Separate out the secure binary check on GP/HS devices so that the
boot_vector could be stripped before calling rproc_load. This allows
keeping the authentication later when the cluster is on along with
allowing the stripping of the binaries in case of gp devices.
Fixes: 1e00e9be62 ("arm: mach-k3: common: re-locate authentication for atf/optee")
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
134 lines
3.7 KiB
C
134 lines
3.7 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* K3: Security functions
|
|
*
|
|
* Copyright (C) 2018-2022 Texas Instruments Incorporated - http://www.ti.com/
|
|
* Andrew F. Davis <afd@ti.com>
|
|
*/
|
|
|
|
#include <asm/io.h>
|
|
#include <common.h>
|
|
#include <cpu_func.h>
|
|
#include <dm.h>
|
|
#include <hang.h>
|
|
#include <image.h>
|
|
#include <log.h>
|
|
#include <asm/cache.h>
|
|
#include <linux/soc/ti/ti_sci_protocol.h>
|
|
#include <mach/spl.h>
|
|
#include <spl.h>
|
|
#include <linux/dma-mapping.h>
|
|
|
|
#include "common.h"
|
|
|
|
static bool ti_secure_cert_detected(void *p_image)
|
|
{
|
|
/* Primitive certificate detection, check for DER starting with
|
|
* two 4-Octet SEQUENCE tags
|
|
*/
|
|
return (((u8 *)p_image)[0] == 0x30 && ((u8 *)p_image)[1] == 0x82 &&
|
|
((u8 *)p_image)[4] == 0x30 && ((u8 *)p_image)[5] == 0x82);
|
|
}
|
|
|
|
/* Primitive certificate length, assumes one 2-Octet sized SEQUENCE */
|
|
static size_t ti_secure_cert_length(void *p_image)
|
|
{
|
|
size_t seq_length = be16_to_cpu(readw_relaxed(p_image + 2));
|
|
/* Add 4 for the SEQUENCE tag length */
|
|
return seq_length + 4;
|
|
}
|
|
|
|
void ti_secure_image_check_binary(void **p_image, size_t *p_size)
|
|
{
|
|
u32 image_size;
|
|
size_t cert_length;
|
|
image_size = *p_size;
|
|
|
|
if (!image_size) {
|
|
debug("%s: Image size is %d\n", __func__, image_size);
|
|
return;
|
|
}
|
|
|
|
if (get_device_type() == K3_DEVICE_TYPE_GP) {
|
|
if (ti_secure_cert_detected(*p_image)) {
|
|
printf("Warning: Detected image signing certificate on GP device. "
|
|
"Skipping certificate to prevent boot failure. "
|
|
"This will fail if the image was also encrypted\n");
|
|
|
|
cert_length = ti_secure_cert_length(*p_image);
|
|
if (cert_length > *p_size) {
|
|
printf("Invalid signing certificate size\n");
|
|
return;
|
|
}
|
|
|
|
*p_image += cert_length;
|
|
*p_size -= cert_length;
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
if (get_device_type() != K3_DEVICE_TYPE_HS_SE &&
|
|
!ti_secure_cert_detected(*p_image)) {
|
|
printf("Warning: Did not detect image signing certificate. "
|
|
"Skipping authentication to prevent boot failure. "
|
|
"This will fail on Security Enforcing(HS-SE) devices\n");
|
|
return;
|
|
}
|
|
}
|
|
|
|
void ti_secure_image_post_process(void **p_image, size_t *p_size)
|
|
{
|
|
struct ti_sci_handle *ti_sci = get_ti_sci_handle();
|
|
struct ti_sci_proc_ops *proc_ops = &ti_sci->ops.proc_ops;
|
|
u64 image_addr;
|
|
u32 image_size;
|
|
int ret;
|
|
|
|
image_size = *p_size;
|
|
if (!image_size) {
|
|
debug("%s: Image size is %d\n", __func__, image_size);
|
|
return;
|
|
}
|
|
|
|
if (get_device_type() != K3_DEVICE_TYPE_HS_SE &&
|
|
get_device_type() != K3_DEVICE_TYPE_HS_FS)
|
|
return;
|
|
|
|
/* Clean out image so it can be seen by system firmware */
|
|
image_addr = dma_map_single(*p_image, *p_size, DMA_BIDIRECTIONAL);
|
|
|
|
debug("Authenticating image at address 0x%016llx\n", image_addr);
|
|
debug("Authenticating image of size %d bytes\n", image_size);
|
|
|
|
/* Authenticate image */
|
|
ret = proc_ops->proc_auth_boot_image(ti_sci, &image_addr, &image_size);
|
|
if (ret) {
|
|
printf("Authentication failed!\n");
|
|
hang();
|
|
}
|
|
|
|
/* Invalidate any stale lines over data written by system firmware */
|
|
if (image_size)
|
|
dma_unmap_single(image_addr, image_size, DMA_BIDIRECTIONAL);
|
|
|
|
/*
|
|
* The image_size returned may be 0 when the authentication process has
|
|
* moved the image. When this happens no further processing on the
|
|
* image is needed or often even possible as it may have also been
|
|
* placed behind a firewall when moved.
|
|
*/
|
|
*p_size = image_size;
|
|
|
|
/*
|
|
* Output notification of successful authentication to re-assure the
|
|
* user that the secure code is being processed as expected. However
|
|
* suppress any such log output in case of building for SPL and booting
|
|
* via YMODEM. This is done to avoid disturbing the YMODEM serial
|
|
* protocol transactions.
|
|
*/
|
|
if (!(IS_ENABLED(CONFIG_SPL_BUILD) &&
|
|
IS_ENABLED(CONFIG_SPL_YMODEM_SUPPORT) &&
|
|
spl_boot_device() == BOOT_DEVICE_UART))
|
|
printf("Authentication passed\n");
|
|
}
|