u-boot/arch/arm/mach-imx/imx8/misc.c
Peng Fan 99ac6c769f imx: move imx8 sci header file to include/firmware/imx
Move imx8 sci header file to include/firmware/imx, then we could
use build macro to reuse some i.MX8 drivers for i.MX9, such as
drivers/cpu/imx8_cpu.c.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Stefano Babic <sbabic@denx.de>
2023-05-21 16:54:32 +02:00

65 lines
1.7 KiB
C

// SPDX-License-Identifier: GPL-2.0+
#include <common.h>
#include <log.h>
#include <firmware/imx/sci/sci.h>
#include <asm/mach-imx/sys_proto.h>
#include <imx_sip.h>
#include <linux/arm-smccc.h>
int sc_pm_setup_uart(sc_rsrc_t uart_rsrc, sc_pm_clock_rate_t clk_rate)
{
sc_pm_clock_rate_t rate = clk_rate;
int ret;
/* Power up UARTn */
ret = sc_pm_set_resource_power_mode(-1, uart_rsrc, SC_PM_PW_MODE_ON);
if (ret)
return ret;
/* Set UARTn clock root to 'rate' MHz */
ret = sc_pm_set_clock_rate(-1, uart_rsrc, SC_PM_CLK_PER, &rate);
if (ret)
return ret;
/* Enable UARTn clock root */
ret = sc_pm_clock_enable(-1, uart_rsrc, SC_PM_CLK_PER, true, false);
if (ret)
return ret;
return 0;
}
void build_info(void)
{
struct arm_smccc_res res;
u32 seco_build = 0, seco_commit = 0;
u32 sc_build = 0, sc_commit = 0;
ulong atf_commit = 0;
/* Get SCFW build and commit id */
sc_misc_build_info(-1, &sc_build, &sc_commit);
if (!sc_build) {
printf("SCFW does not support build info\n");
sc_commit = 0; /* Display 0 if build info not supported */
}
/* Get SECO FW build and commit id */
sc_seco_build_info(-1, &seco_build, &seco_commit);
if (!seco_build) {
debug("SECO FW does not support build info\n");
/* Display 0 when the build info is not supported */
seco_commit = 0;
}
/* Get ARM Trusted Firmware commit id */
arm_smccc_smc(IMX_SIP_BUILDINFO, IMX_SIP_BUILDINFO_GET_COMMITHASH,
0, 0, 0, 0, 0, 0, &res);
atf_commit = res.a0;
if (atf_commit == 0xffffffff) {
debug("ATF does not support build info\n");
atf_commit = 0x30; /* Display 0 */
}
printf("Build: SCFW %08x, SECO-FW %08x, ATF %s\n",
sc_commit, seco_commit, (char *)&atf_commit);
}