u-boot/arch/arm/mach-imx/imx8/Kconfig
Oliver Graute 3bc6257e80 imx: support i.MX8QM DMSSE20 a1 board
Add i.MX8QM DMSSE20 a1 board support

U-Boot 2023.04-00030-g7be2f547b2 (Apr 21 2023 - 11:11:43 +0200)

Model: Advantech iMX8QM DMSSE20
Board: DMS-SE20A1 8GB
Build: SCFW 549b1e18, SECO-FW c9de51c0, ATF 5782363
Boot:  USB
DRAM:  8 GiB
Core:  100 devices, 19 uclasses, devicetree: separate
MMC:   FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
Loading Environment from MMC... OK
In:    serial@5a060000
Out:   serial@5a060000
Err:   serial@5a060000
Net:   eth0: ethernet@5b040000
Warning: ethernet@5b050000 (eth1) using random MAC address - 32:05:0c:f9:5e:10
, eth1: ethernet@5b050000
Hit any key to stop autoboot:  0

Signed-off-by: Oliver Graute <oliver.graute@kococonnector.com>
2023-05-02 10:57:32 +02:00

134 lines
2.8 KiB
Text

if ARCH_IMX8
config AHAB_BOOT
bool "Support i.MX8 AHAB features"
imply CMD_DEKBLOB
help
This option enables the support for AHAB secure boot.
config IMX8
bool
select HAS_CAAM
config MU_BASE_SPL
hex "MU base address used in SPL"
default 0x5d1b0000
help
SPL runs in EL3 mode, it use MU0_A to communicate with SCU.
So we could not reuse the one in dts which is for normal U-Boot.
config IMX8QM
select IMX8
select SUPPORT_SPL
select SPL_RECOVER_DATA_SECTION if SPL
bool
config IMX8QXP
select IMX8
select SUPPORT_SPL
select SPL_RECOVER_DATA_SECTION if SPL
bool
config SYS_SOC
default "imx8"
config BOOTAUX_RESERVED_MEM_BASE
hex "i.MX auxiliary core dram memory base"
default 0
config BOOTAUX_RESERVED_MEM_SIZE
hex "i.MX auxiliary core dram memory size"
default 0
choice
prompt "i.MX8 board select"
optional
config TARGET_APALIS_IMX8
bool "Support Apalis iMX8 module"
select BOARD_LATE_INIT
select IMX8QM
config TARGET_COLIBRI_IMX8X
bool "Support Colibri iMX8X module"
select BOARD_LATE_INIT
select IMX8QXP
config TARGET_DENEB
bool "Support i.MX8QXP Capricorn Deneb board"
select BINMAN
select BOARD_LATE_INIT
select FACTORYSET
select IMX8QXP
config TARGET_GIEDI
bool "Support i.MX8QXP Capricorn Giedi board"
select BINMAN
select BOARD_LATE_INIT
select FACTORYSET
select IMX8QXP
config TARGET_IMX8QM_MEK
bool "Support i.MX8QM MEK board"
select BINMAN
select BOARD_LATE_INIT
select IMX8QM
select FSL_CAAM
select ARCH_MISC_INIT
select SPL_CRYPTO if SPL
config TARGET_CONGA_QMX8
bool "Support congatec conga-QMX8 board"
select BINMAN
select BOARD_LATE_INIT
select SUPPORT_SPL
select IMX8QM
config TARGET_IMX8QM_ROM7720_A1
bool "Support i.MX8QM ROM-7720-A1"
select BINMAN
select BOARD_LATE_INIT
select SUPPORT_SPL
select IMX8QM
config TARGET_IMX8QM_DMSSE20_A1
bool "Support i.MX8QM DMS-SE20-A1 board"
select BINMAN
select BOARD_LATE_INIT
select SUPPORT_SPL
select IMX8QM
config TARGET_IMX8QXP_MEK
bool "Support i.MX8QXP MEK board"
select BINMAN
select BOARD_LATE_INIT
select IMX8QXP
select FSL_CAAM
select ARCH_MISC_INIT
select SPL_CRYPTO if SPL
endchoice
source "board/freescale/imx8qm_mek/Kconfig"
source "board/freescale/imx8qxp_mek/Kconfig"
source "board/congatec/cgtqmx8/Kconfig"
source "board/advantech/imx8qm_dmsse20_a1/Kconfig"
source "board/advantech/imx8qm_rom7720_a1/Kconfig"
source "board/toradex/apalis-imx8/Kconfig"
source "board/toradex/colibri-imx8x/Kconfig"
source "board/siemens/capricorn/Kconfig"
config IMX_SNVS_SEC_SC
bool "Support SNVS configuration"
help
Allow to configure the SNVS via SCU API to configure tampers and secure
violation.
config IMX_SNVS_SEC_SC_AUTO
bool "Support SNVS configuration command"
depends on IMX_SNVS_SEC_SC
help
This configuration will apply the selected configurations automatically
at boot.
endif